Quality/ Frame rate ƈ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode STILL IMAGE mode MOVIE CLIP mode Icon Sub menu S. Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi Frame Rate Quality S.Fine 30 FPS Fine 15 FPS Normal [ STILL IMAGE mode ] [ MOVIE CLIP mode ] INFORMATION ƃ S. Fine is the highest quality and Normal is the lowest setting.
Metering ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] ( ) [Spot] ( ) : Exposure will be calculated based on an average of the available light in the image Metering area. However, the calculation will be Multi Spot biased towards the centre of the image area. This is suitable for general use. : Only the rectangular area in the centre of the LCD monitor will be metered for [STILL IMAGE mode] light.
Sharpness ƈ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Sub menu Icon Sharpness Soft Normal Vivid Description The edges of the image are softened. Soft This effect is suitable for editing images on your PC. The edges of the image are sharp. Normal This is suitable for printing. The edges of the image are emphasized.
Effect ƈ By using the camera’s digital processor, it is possible to add special effects to your images. Effect Effect Normal Normal B&W Sepia Red Green Blue B&W Sepia Red Green Blue [MANUAL mode] [Normal] [B & W] [Sepia] [ MOVIE CLIP mode] : No effect is added to the image. : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). [Red] : Captured images will be stored in a red tone.
Special Effect ƈ By using the camera’s digital processor, it is possible to add special effects to your images. You can select this menu only in the MANUAL mode. ƈ You can select the preset focus frame, Composite shooting and Photo frame function. If a special effect is selected, the rest special functions set before are cancelled automatically. ƈ Even if the camera is turned off, the special effect setting will be preserved. To cancel the special effect, select the [Off] sub menu of each menu.
Special Effect : Preset focus frames ƃ Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the +/- button. 3. The colour of focus frame turns white. Press the Up/Down/Left/Right button to moves the focus frame position. 4. To select the focus frame position, press the +/- button again and you can take a picture.
Special Effect : Composite shooting ƈ You can combine 2 ~ 4 different shots in a still image. 1. Select the MANUAL mode, and press the menu button. 2. Press the LEFT/ RIGHT button and select the Special Effect [Special Effect] menu tab. HighLight Off Composite 2 Parts 3. Select the [Composite] menu by pressing the UP/ DOWN Photo Frame 3 Parts button and press the Right button. 4 Parts PANO.2 Part 4. Select a desired sub menu by pressing the UP/ DOWN Back:Ȝ Set:OK button and press the OK button.
Special Effect : Composite shooting ƃ Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the +/- button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the +/- button again and a previous image will be deleted again.
Special Effect : Photo Frame ƈ You can add 9 types of frame-like borders to a still image you want to capture. ƈ Date & Time information will not be printed on the stored image taken with [Photo Frame] menu. 1. Select the MANUAL mode, and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Special Effect] menu tab. 3. Select the [Photo Frame] menu by pressing the UP/ DOWN button and press the Right button. 4.
Movie Clip frame stabiliser ƈ This function helps stabilize images captured during movie recording. You can select this menu only in the MOVIE CLIP mode. If the memory card is not inserted, this function will not operate. ƃ How to use this function 1. Select the MOVIE CLIP mode by pressing the M (Mode) button and press the menu button. Press the Left/Right Stabilizer Off button to select the [Stabilizer] menu. On 2. Select a desired sub menu by pressing the Up/Down button and press the OK button.
Starting play mode ƈ Turn the camera on and select Play mode by pressing the play mode button ( The camera can now play back the images stored in the memory. ). ƈ You can set up the PLAY mode function by using the camera buttons and LCD monitor. ƈ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ƈ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ƃ Playing back a still image 1.
Starting play mode ƃ Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again.
Starting play mode ƈ On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. ƃ If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Select a desired movie clip in the play mode. 2. Play back the movie clip by pressing the Play & Pause button. 3. Press the Pause button at the point of the movie clip that you want to start extracting. 4. Press the T button.
Starting play mode ƃ Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice that you want to play back by using the LEFT/RIGHT button. If you select a recorded voice file, the voice indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again.
LCD monitor indicator ƈ The LCD monitor displays shooting information about the displayed image. ڿ ۀ ڹ ں ڻ ڼ ڽ ھ No. Description Icon Page 1 Play mode - 2 Battery p.17 3 File Type - 4 Voice memo p.68 5 Protect indicator p.80 6 DPOF indicator p.84 7 Folder name and Stored image number 8 Volume display 100-0009 p.XX ƈ Shooting information is as following. Size Av Tv ISO Flash Date : : : : : : 2592X1944 F3.
Using the camera buttons to adjust the camera ƈ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button ƈ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it (Under 1 Sec.) again to switch to Recording mode. ƈ You can turn the power on with the play mode button. The camera is turned on in play mode. Press the play mode button (Under 1 Sec.
Thumbnail( )/ Enlargement( ) button/ Volume button( ) ƈ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƈ When a movie clip, voice memo or voice recording files is playing back, you can control volume of those files by this button. ƃ Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail( )/ Enlargement( ) button/ Volume button( ) ƃ The maximum enlargement rate in proportion to the image size. Image size 2592 2272 2048 1600 1024 640 Maximum enlargement rate X10.1 X8.8 X8.0 X6.2 X4.0 X2.5 ƃ Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing Trimming? Trimming the 5 function button. Cancel 3.
Voice ( ) memo/ Up button ƈ When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. ƈ When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. ƃ Adding a Voice Memo to a Still Image 1. Press the LEFT/ RIGHT button to select an image that you wish to add sound to. 2. Press the voice memo button ( ) and the voice memo indicator will display.
Play & Pause ( )/ Down button ƈ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback.
Delete ( ) button ƃ Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. The following message will be displayed on the LCD monitor. 3. Select the submenu values by pressing the UP/DOWN button and then press the OK button. If [Delete] is selected : deletes the selected images. If [Cancel] is selected : cancels "Delete Image". Press the DELETE button.
Album button ƈ You can organise the captured still images into albums by using the Album button. ƈ This camera has 8 albums and each album can take up to 100 images. ƈ The album menu loading time depends on the memory card type. ƈ How to use the album ƃ Selecting the album 1. In the play mode, press the Album button. 2. Select the [Select] menu by pressing the Up/Down button and press the Right button. Select Slide Add Remove Move: Exit:MENU 3.
Album button 3. Select the still images you wish to add by pressing the Up/Down/Left/Right buttons and press the Zoom T button. marks are displayed on the selected images. ſ To cancel the selection, press the Zoom T button again. Select Slide Add Remove Select:T 4. Press the OK button and a confirmation window will display. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [Add] : Inserts the selected images into the album. - [Cancel] : Cancels the inserting images.
Album button ƃ Playing back the albums Ƅ Playing back all of the albums 1. Select [All] menu and press the OK button. All of the albums will be selected. 2. Select [Slide] menu by pressing the Up/Down button and press the Right button. ſ You can select [Start], [Interval], [Repeat] and [Effect] menus. - [Start] : Start the slide show - [Interval] : Set the slide show play interval - [Repeat] : Choose to repeat the slide show after finishing the first cycle.
Setting up the play back function using the LCD monitor ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
Setting up the play back function using the LCD monitor Menu tab Main menu Copy to Card OSD Information Sub menu Secondary menu No - Yes - Full OSD - None - Page p.88 p.XX ƈ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu Images Auto Set Sub menu Secondary menu One Pic - All Pics - No - Yes - Page p.90 p.
Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Auto Type Plain Photo Fastphoto Auto Draft Quality Custom Set Normal Fine p.91 Auto Date Off On Auto File Name Off On Print DPOF Print Reset Standard - Index - No - Yes - No - Yes - p.92 p.92 p.93 ſ Menus are subject to change without prior notice.
Starting the slide show ƈ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Slide] menu tab. ƃ Start the slide show : The slide show can start only in the [Start] menu. 1. Use the Up/Down buttons to select the [Start] menu. 2. Press the OK button to start the slide show.
Starting the slide show ƃ Configure slide show effects: Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHT button. Slide 2. Use the Up/Down Button to select the type of effect. Start Cancel Interval Effect 1 [Cancel] : Normal display. Repeat Effect 2 Effect Effect 3 [Effect 1] : Image is displayed slowly. Effect 4 [Effect 2] : Image is displayed slowly from the centre Back:Ȝ Set:OK outwards.
Protecting images ƈ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ƃ Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Protect] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select ] : Selection window for an image to be protected/released is displayed.
Deleting images ƈ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ƃ Deleting images 1. Press the play mode button and press the menu button. 2.
Resize ƈ Change the resolution (size) of pictures taken. Select [User image] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Resize] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Effect ƈ By using the camera’s digital processor, it is possible to add special effects to your images. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Effect] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button. [B & W] : Captured images will be stored in black and white [Sepia] : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). [Red] : Captured images will be stored in a red tone.
Rotating an image ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Rotate] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button.
DPOF : Standard ƈ This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up/Down/Left/Right : Select an image to print.
DPOF : Print size ƈ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ƃ Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Size] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Copy To Card ƈ This enables you to copy image files to the memory card. ƃ Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [Copy to Card] menu tab by pressing the LEFT/ Copy To Card RIGHT button. No Yes 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [No] : Cancels "Copy to Card". Exit:MENU - [Yes] : All images saved in the internal memory are copied to the memory card after the [Processing!] message is displayed.
OSD Information ƈ You can check shooting information about the displayed image. ƃ How to select a type of OSD information 1. Press the play mode button and press the menu button. 2. Select the [OSD Information] menu tab by pressing the LEFT/ RIGHT button. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƃ Setting up the camera for connection with the printer 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select [Setup] menu tab. 3. Select [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
PictBridge : Picture Selection ƈ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the shutter button : Currently displayed image will be printed with the printer’s default setting. - Pressing the Left / Right button : Selects a previous / next image. 141-0001 Ȝ Ȟ Print:Shutter ƈ Select pictures to print 1. The [Images] menu will appear. 2.
PictBridge : Print Setting ƈ AUTO SET 1. Use the LEFT and RIGHT buttons to select the [Auto Set] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [No] : [Custom Set] values are kept. [Yes] : All values in the [Custom Set] are automatically changed. Auto Set No Yes Move: ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1.
PictBridge : Printing ƈ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [Print] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [Standard] : Print the pictures stored in the memory card in set numbers. One picture is printed on one piece of paper. [Index] : Print multiple images on one sheet of paper. 3. The screen shown on the right will appear and the picture will be printed.
PictBridge : RESET ƈ Initialises user-changed configurations. 1. Use the LEFT and RIGHT buttons to select the [Reset] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset. Reset No Yes Move: ſ Default print setting varies depending on the printer manufacturer.
Setup menu ƈ In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu File Power Save Sub menu Secondary menu Series - Reset - 1, 3, 5, 10 min - Page p.95 p.96 ENGLISH ጥૹ FRANÇAIS DEUTSCH ESPAÑOL ITALIANO ⁹ᷘ Language P”CCK»… PORTUGUÊS DUTCH DANSK SVENSKA SUOMI p.
Setup menu Menu tab Main menu AF Lamp LCD Video Out Quick View Reset Sub menu Secondary menu Off - On - Dark - Normal - Bright - NTSC - PAL - Off, 0.5, 1, 3 sec - No - Yes - Page p.100 p.100 p.101 p.103 p.103 ſ Menus are subject to change without prior notice. File name ƈ This function allows the user to select the file naming format. ƃ Assigning File Names 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. Setup 2.
File name INFORMATION ƃ The first stored folder name is 100SSCAM, and the first file name is SSM10001. ƃ File names are assigned sequentially from SSM10001 ƍ SSM10002 ƍ ~ ƍ SSM10099. ƃ The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM. ƃ The files used with the memory card conform to the DCF(Design rule for Camera File systems) format.
Language ƈ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery and AC charger are removed and inserted again, the language setting will be preserved. ƃ Setting Language 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. Setup File ENGLISH 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. Power Save ጥૹ 3.
Setting up the Date/ Time/ Date type ƈ You can change the date and time that will be displayed on the captured images and set up the date type. ƃ Setting Date/Time & Selecting Date Format 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. Setup File 2. Press the LEFT/ RIGHT button and select the [Setup] Ɗ Power Save menu tab. 05/ 05/ 01 13:01 Language ƌ Format 3. Select the [Date&Time] menu by pressing the UP/ DOWN yy/mm/dd Date&Time button and press the RIGHT button.
Sound ƈ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. ƃ Setting Operation Sounds 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [Sound] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Auto Focus lamp ƈ You can turn on and off the Auto Focus lamp ƃ How to set up the lamp 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [AF Lamp] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. If [Off] is selected : The AF lamp will not light up.
Selecting Video out type ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƃ Setting the Video Out Type 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [Video Out] menu by pressing the UP/ DOWN button and press the RIGHT button.
Selecting Video out type INFORMATION ƃ NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. ƃ PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. ƃ When using a TV as an external monitor, you will need to select the external or AV channel of the TV. ƃ There will be a digital noise on the external monitor, but it is not a malfunction.
Quick view ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ƃ Setting Quick View 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. Setup 2. Press the LEFT/ RIGHT button and select the [Setup] USB Off AF Lamp 0.5 sec menu tab. LCD 1 sec Video Out 3 sec 3.
Setting up the Mycam menu ƈ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Sub menu Page Off LOGO User Image 1 User Image 2 Off Sound 1 Sound 2 Sound 3 Off Sound 1 Sound 2 Sound 3 S.Image p.104 S.Sound p.105 SH.Sound p.105 ſ Menus are subject to change without prior notice.
Start up sound ƈ You can select the sound that is activated whenever the camera is turned on. ƃ Setting the Startup Sound 1. In any mode with the exception of Voice Recording and MP3 mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Mycam] menu tab. 3. Select the [S.Sound] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. 5. Press the menu button twice and the menu will disappear.
MP3 mode ƈ Digimax i50 MP3 player This camera has embedded MP3 player program. You can save the MP3 files on this camera and listen to the MP3 files that is near enough to compact disk quality. Downloading MP3 files ƈ To use MP3 files, ther must be saved in the internal memory or memory card of this camera. 1. Save the desired files on your PC. 2. Connect the camera to your PC with the USB cable and turn on the camera. 3. Open Window's EXPLORER and search for [Removable Disk]. 4.
Starting the MP3 mode ƈ You can select the MP3 mode by the M (Mode) button located on the back of the camera and [Mode] menu. ƃ Selecting the [Mode] menu 1. Insert the battery (p.17). 2. Insert the memory card that holds MP3 files (p.21). As this camera has a 43MB internal memory, you can save MP3 Mode Still/ Movie/ MP3 files on the internal memory. Full 3. Close the battery chamber cover. 4. Press the power button to turn on the camera. 5. Press the menu button and a menu will display.
Starting the MP3 mode ƃ Changing the MP3 mode : If the [Full] menu was selected Steps from 1-4 are the same as those for selecting the [Mode] menu. 5. A recording mode used just before will display. 6. Press the M (Mode) button located on the back of the camera and the mode selection menu will display. 58 7. To select the MP3 mode, press the Left/Right button. ;M\"73 5 8. Press the Play button ( ) and an MP3 file will play back. To use an earphones, insert it to the Earphones jack. 9.
LCD monitor indicator of the MP3 mode ƈ The LCD monitor displays information about the MP3 file. ڹ ہ ں ۀ ڻ
Using the camera buttons to adjust the camera List button ƈ You can see the MP3 files list and select a file. ƃ Selecting MP3 files 1. In the MP3 mode, press the ( ) button. The cursor will lighlight a file that had been played back at the time the list button was pressed. 2. You can select a file by pressing the Up/Down button. Pressing the Left/ Right button scrolls the previous/next page of the lists.
Using the camera buttons to adjust the camera Lock button ƃ If you press the Lock button over 1 second, the camera buttons are locked. ƃ When the camera buttons are locked, a icon as shown will display.
Using the camera buttons to adjust the camera Volume button ƈ You can control the volume with this button. ƈ There are 0~30 steps. If you press it shortly, the volume will increase or decrease with 1 step and if you press and hold it, the volume will increase/decrease continuously. Control button ƈ When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. ƈ You can search the MP3 files by pressing the Left/Right button.
Setting up the play back function using the LCD monitor ƈ MP3 mode functions can be changed by using the LCD monitor. In the MP3 mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in MP3 mode are as follows. Menu tab Main menu Sub menu Page Play One Repeat One Play mode Play All p.113 Repeat All Shuffle No Delete all Slide show All p.114 Off On p.114 ſ Menus are subject to change without prior notice.
Setting up the play back function using the LCD monitor Delete all ƈ How to delete the files 1. In the MP3 mode, press the Menu button. Delete All 2. Select the [Delete All] menu tab by pressing the Left/Right button. No All Exit:MENU 3. Select a desired menu by pressing the Up/ Down button and press the OK button. [No] : Cancel the "Delete files" [All] : a confirmation window will display. Select [Delete] menu and press the OK button. All MP3 files are deleted and [No Music!] message will display.
Important notes Be sure to observe the following precautions! ƈ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ƈ Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. ƈ If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using the camera for an extended period of time.
Warning indicator ƈ There are several warnings that may appear on the LCD display Card Error! ϛMemory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card (p.97) Memory Error! ϛInternal memory error ƍ Turn off the camera power and turn it on again ƍ Format the memory with the memory card removed. (p.
Warning indicator Low Light! ϛWhen taking pictures in dark places ƍ Take pictures in Flash Photography mode. Out Of Number ϛWhen selecting too many printing pages in the PictBridge menu. ƍ Select printing page within the limitation. Before contacting a service centre ƈ Please check the following The camera doesn’t switch on ϛThere is low battery capacity ƍ Insert charged battery (p.
Before contacting a service centre Camera does not take images when pressing the Shutter button ϛThere is insufficient memory capacity ƍ Delete unnecessary image files ϛThe memory card has not been formatted ƍ Format the memory card (p.97) ϛThe memory card is exhausted ƍ Insert a new memory card ϛThe memory card is locked ƍ Refer to [Card Locked!] error message (p.108) ϛThe camera’s power is off ƍ Turn the camera power on ϛThe battery are exhausted ƍ Insert charged battery (p.14 ~ 18).
Before contacting a service centre The camera buttons do not operate ϛCamera malfunction ƍ Remove /re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera.
Specifications 1/2.5" CCD Approx. 5.0 Mega-pixel Approx. 5.1 Mega-pixel SHD Lens f = 6.6 ~ 19.8mm (35mm film equivalent : 39 ~ 117mm) F 3.5 ~ F 4.5 Lens Still Image mode : 1.0X ~ 5.0X Digital Zoom Play mode : 1.0X ~ 10.1X (depends on image size) LCD Monitor 2.
Specifications Media File Format Image Size Storage Capacity (32MB) Image Play Type Editing Interface Power Source Dimensions (WxHxD) Weight Operating Temperature Operating Humidity Software Camera Driver Application Special Features ŝ122Ş Internal memory : Approx. 50MB flash memory External memory : SD card /MMC (Up to 1GB Guaranteed) Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Specifications ſ MP3 player Audio File Play Mode Frequency Earphone Port Output Noise Ratio File Format Bit Rate 20Hz~20KHz 3.5mm Port (Stereo Type) Maximum Volume Left 15mW + Right 15mW(16ѳ) 85 dB with 20 KHz LPF MP3 (MPEG-1/2/2.5 Layer 3), 8 ~ 320kbps (Including VBR) One, All, Repeat One, Repeat All, Random, Slide Show On/Off (User Selectable) ſ Specifications are subject to change without prior notice. ſ All trademarks are the property of their respective owners.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.