AT319S Standalone Multi-Payment Alcohol Tester Operation Manual
Cautions ➢ ➢ ➢ ➢ ➢ ➢ To have accurate indication of blood alcohol concentration, please test at least 15 minutes later after drinking. Do not put smoke into the tube, which can damage the sensor. Do not clean surface by Ethanol. Please use soft wet cloth and neutral detergent. Do not use inappropriate charger, otherwise it may cause AT319S damaged or malfunction. Do not use it beyond -10℃-50℃. Avoid any fall or strong shock.
Summary AT319S is a standalone multi-payment alcohol tester with start of the art design, which adopts advanced changeable fuel cell sensor module that presents professional grade accuracy, superb repeatability and high sensitivity.
Main Technical Parameters Sensor Advanced Fuel Cell Sensor Life 2 Years Test Range 0.000～0.400%BAC Resolution 0.001%BAC Payment Options Coin, Debit Card, Credit Card, Apple Pay Internet 4G, WiFi Warm-up Time ≤30s Working Condition Temperature：0℃～50℃ Humidity：≤95％RH No Condensing Display 7”（1024*600）Touch Screen Working Voltage Adapter Input：AC110V～AC240V，50/60Hz； Output：DC12V/1.5A Unit %BAC, mg/l, g/l Accuracy ±0.005%BAC (0-0.800%BAC) ± 8% (0.800-0.200%BAC) ±20% (0.200-0.
Structures 1. Case Locker 2. Mounting Hole 3. Coin Accepter 4. Main Board 5. Sensor Module 6. Payment Module 7. Nozzle Hole How to set up the model coin Power on the tester and open the gate, you will see there’s a coin accepter(see photo below) and LED indicator⑦ lighting continuously. Press set button⑤ 2 seconds then release, the left top LED indicator⑦ turns from red to green.
Name Function ① 3 segment jiggle switch Distinguish accuracy: exact, normal, loose ② 4 pin Jack ③ 2 segment jiggle switch Distinguish NO and NC ④ 3 segment jiggle switch COIN single transmission speed: fast, middle and slow ⑤ Set button Set ⑥ 2 pin Jack Electromagnetic strobe ⑦ LED Indicator Showing to set the coin ⑧ Coin entrance Coin Entrance ⑨ Coin return button Press this button to get the coin which blocked in the coin entrance ⑩ Coin returned exit Coin returned exit
Payment Options AC power on, the machine will start initialization. Touch screen then it will show 2 options of payment method which are Coin, and Credit Card Swipe. Choose one of the options to continue the payment. Please note: if you select the option other than coin, make sure the machine connects to WiFi or 4G. Coin: After set model coin, choose coin payment option and insert the coin to continue payment. Credit Card Swipe: Choose Swipe payment option, it will show “please swing card”.
WiFi signal; 4G signal; status of machine working normally or not; coin tray is full or not; due for sensor recalibration or replace; system setup. Click , to enter system setup interface on which user can register a username and sign in, alternative the user can complete registration by visiting https://alcohol.sq361.com/hanwei ：View revenue on daily or monthly basis.
that indicated as coin tray is full. ：Automatically check each module if it’s working normally. ：To swipe magnetic card to check if it works normally. Click it, there’s a message: please swing magnetic card. Swipe card, then the machine will identify the card information indicating it’s under normal condition, otherwise, it’s faulty. Please note: there’s another pop-up message after 15s without any operation: Magnetic device may be fault. ：To cast one coin to check if coin accepter works.
：The number in top right indicates the quantity of coins in coin tray. When coin tray is full, the icon turns red. Please note: every time owner collects up all coins, please click the icon, the number will disappear. ：Change password. ：Set display brightness, etc. ：Set WiFi connection. ：System setting.
Wall-mounted Alcohol Test Management System Register an Account Click , to enter system setup interface on which owner can register a username and sign in, alternative the user can complete registration by visiting https://alcohol.sq361.com/hanwei Device Bind Click “device information” ,“Device bind” and input ID number, then click “Active device” to complete adding new device. Pleae note the device will be automatically added if the username is registered on the machine itself.
图6 Device Configuration After new device is added, it can do some configuration by clicking “device config”. Device Unbind Click “device unbind” to remove binding.
Payment Account Bind Click “Merchant information” to input merchant information. Click “User Edit” to input owner’s account number that will receive transaction payment and password. Transaction Management Merchant can monitor all detailed historical transaction records by screening payment options, device number, transaction time and export operation datasheet.
图9 Advertisement Management User can upload some photos as advertisement to be shown in the display when the machine turns into standby mode.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
