USER'S MANUAL TM ST 800 FLEX Numeric Pager SUN TELECOM I N T E R N A T I O N A L
ST 800 Congratulations on your purchase of our ST 800 pager. By incorporating some of the most advanced electronic paging technologies, the ST 800 pager is reliable & easy to use. Best of all, the ST 800 is affordable & will keep you in touch with those important to you. Please carefully read this manual before using your pager in order to fully understand the ST 800 's functions & capabilities. Once again, congratulations on your purchase.
CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
1.
2.
3.
4. TURNING THE PAGER ON < Standby Screen > Insert battery into battery compartment and close the battery door. Pager will power up with a full display of all LCD segments and emit a short audible alert with date and time display. To turn the pager on from the power off state, press and hold the READ button for at least 2 seconds.
5. FUNCTION MENU To access the function menu mode, press the FUNCTION button for at least 2 seconds. This mode allows the user to access the various functions and features of the pager through a series of menu prompts. Pressing the FUNCTION button allows you to scroll the menu prompts as illustrated(Page 9). Note The menu prompt "CLEAR ALL?"will not appear if no message is received.
/ FUNCTION MENU
6. TURNING THE PAGER OFF Press the FUNCTION button and hold for at least 2 seconds to enter the function menu mode. Press the FUNCTION button to display the "POWER OFF?"prompt, now press the READ button to turn off the pager. If the pager is off, the LCD will only display the date and time. Although the alarm icon is not displayed, the feature will operate normally. If the pager is OFF, it cannot receive any messages.
7. SETTING THE TIME AND DATE < Fig.7a > < Fig.7b > Press the FUNCTION button and hold for at least 2 seconds to enter the function menu mode. Press the function button to scroll through the menu prompts until the "SET TIME ?"prompt is displayed. Press the READ button to enter the set time mode. The pager will first display a blinking field for the year. Press the READ button to set correct year(Fig.7a). Press the FUNCTION button to move to the date and time field(Fig.7b).
8. SETTING VIBRATION/AUDIBLE ALERT < Fig.8a > < Fig.8b > You can select the alert mode to vibrate or to produce an audible tone. Within the standby screen, press the FUNCTION button for at least 2 seconds to enter the function menu mode. The pager will display either of depending on the initial state of the alert mode. Press the READ button to select the audible or vibration mode. In the audible mode, the pager will display the speaker icon .
9. SETTING ALERT MODE < Fig.9a > < Fig.9b > Enter this mode to select the different type of alerts: Chirp Standard Tone Melody Silent Press the FUNCTION button and hold for at least 2 seconds to enter the function menu mode. Press the FUNCTION button to scroll through the menu prompt until the "SET ALERT?" is displayed(Fig.9a). Press the READ button to enter the set alert mode(Fig.9b). Press the READ button twice to scroll though the choice alerts available.
10. RECEIVING AND READING MESSAGES < Fig.10a > < Fig.10b > < Fig.10c > The pager will emit an audible alert or vibrate(depending on the alert setting mode) when a message is received. The pager will also display the number of unread messages. If there are two unread messages, the pager will display as . Press the READ button to display the first message(Fig.10b). Press the READ button to advance to the display the message arrival time(Fig.10c).
11. LOCKING AND UNLOCKING MESSAGES The pager allows you to lock up to 10 messages, preventing you from accidentally erasing or losing them due to incoming messages when memory is full. To lock messages < Fig.11a > < Fig.11b > < Fig.11c > Select the message you want to lock by pressing the READ button to scroll through the memory(Fig.11a). Press the FUNCTION button to display the "LOCK?"prompt(Fig.11b). Press the READ button to lock the message.
To unlock messages < Fig.11d > Locked messages can be unlocked in a similar way. Press the READ button to display the message you wish to unlock(Fig.11d). Press the FUNCTION button to display the "UNLOCK? " prompt(Fig.11e). < Fig.11e > Press the FUNCTION button to display the "UNLOCKED" prompt and the lock icon will disappear(Fig.11f). < Fig.
12. DELETING MESSAGES The pager allows you to delete either a single message or all messages at one time. Only read and unlocked message can be deleted. Selective Delete < Fig.12a > < Fig.12b > Select the message you want to delete by pressing the READ button to scroll through the memory. Press the FUNCTION button twice on the desired message screen to display the "CLEAR ? " prompt (Fig.12a). Press the READ button to delete the message.
Clear All The pager will allow the"CLEAR ALL" function only if it has received more than one message. In the standby screen, press the FUNCTION button and hold for at least 2 seconds to enter into the function menu mode. < Fig.12c > Press the FUNCTION button to scroll through the menu prompt until the "CLEAR ALL?"prompt is displayed(Fig.12c). < Fig.12d > Press the READ button to delete all read and unlock messages. The pager will display "ALL CLEARED" to indicate that all messages have been deleted(Fig.
13. SETTING THE ALARM < Fig.13a > < Fig.13b > < Fig.13c > < Fig.13d > The pager has a daily alarm for you to set at a specific time to alert you to any important task. Within the standby screen, press the FUNCTION button and hold for at least 2 seconds to enter the function menu mode. Press the FUNCTION button to scroll through the menu prompt until the "SET ALARM?"prompt is displayed(Fig.13a). Press the READ button to access the alarm setting mode. The pager will display the "ALARM ON"prompt (Fig.
Continue to set the AM/PM field in a similar way. Upon completion, the pager returns to the standby screen displaying the desired set time. The alarm icon will light up to indicate the alarm is active. To Turn Off Alarm < Fig.13e > < Fig.13f > 20 While in standby mode, press the FUNCTION button and hold for at least 2 seconds to enter the function menu mode. Press the FUNCTION button to scroll through the menu prompt until the "SET ALARM?" prompt is displayed.
Press the FUNCTION button to return the pager to the standby screen(Fig.13g). < Fig.13g > 14. BACKLIGHTING In low light conditions, pressing the LAMP button will turn the backlight on. The backlight will automatically turn off after 8 seconds.
15. OTHER FEATURES Memory Full < Fig. 14 > The pager will display "MEM FULL" when all 21 slots are filled(Fig 14). In Service Range Indicator When the pager is within the coverage area, the In Service Range Indicator icon will appear on the LCD screen. Low Battery Indicator The low battery indicator will appear when the battery energy is depleted. Users are advised to replace the battery immediately.
Battery Information The pager is designed to operate with a "AAA" size alkaline battery. Note Do not use carbon zinc battery. To install or replace the battery Place the pager face down in the palm of your hand. Push to slide the battery door off. Place the new battery into the battery compartment. CAUTION Ensure battery polarity is correct before installing battery. Do not insert battery in reverse polarity.
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Caution : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate this equipment.
