CDMA WLL User’s Manual HTP-800/1900/810 CDMA-2000 Wireless Local Loop Phone HTP-800/1900/810 User’s Manual V3.0 Notice : This manual has been being made before user interface is completed. Therefore it could have the necessary of modification and deletion of some of menu items.
CDMA WLL User’s Manual HTP-800/1900/810 CONTENTS Highlights 1. Important Information 1.1 Safety Precautions 1.2 Care and Service 2. Introduction 2.1 Checking the parts 2.2 Setting up your phone 2.3 Getting to know your phone 3. Basic Functions 3.1 Making Calls 3.2 Redial 3.3 Receiving Calls 3.4 Adjusting Volumes 3.5 Choosing the ring tone 3.6 ON-HOOK Call 3.7 Speaker Call 3.8 Menu option Table 3.9 Conversion and Message Menu 4. Phone Book 4.1 The Internal Phone Book 4.2 Storing numbers in Memory 4.
CDMA WLL User’s Manual HTP-800/1900/810 5.6 Sending your phone number 5.7 Selecting time Mode 5.8 Setting the Alarm 5.9 Checking and Clearing Call Times 5.10 Setting Warning Beeps 6. Advanced Functions 6.1 Changing greeting Message 6.2 System Reset 6.3 Restricting use of the phone 6.4 Locking the phone 6.5 Changing the lock code 6.6 Authentication Function 6.7 Tone Length 7. Additional Functions 7.1 Call Forwarding 7.2 Call Waiting 7.3 Three-way Calling 7.4 Short Message Service(SMS) 7.5 Data/PC Fax 7.
CDMA WLL User’s Manual HTP-800/1900/810 Highlights Congratulations on your purchase of the HTP-800/1900/810 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features. The telephone provides: ■ 2-line Character LCD Display with status indicator and 1 Icon(HTP-800/1900).
CDMA WLL User’s Manual HTP-800/1900/810 1. Important Information 1.1 SAFETY PRECAUTIONS ■ Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed. ■ For the best call quality, keep the antenna free from obstructions and point the antenna straight up. ■ Do not use the unit with a damaged antenna.
CDMA WLL User’s Manual HTP-800/1900/810 ■ Avoid shock or impact. ■ We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.2 Care and Service ■ Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
CDMA WLL User’s Manual HTP-800/1900/810 2.2 Setting up your phone 2.2.1 Installing the phone This phone operates by receiving D.C. power, which is connected to electrical outlet. The phone is equipped with a rechargeable external battery to back up power failure.
CDMA WLL User’s Manual HTP-800/1900/810 2.2.2 Service status check Display in service area When the power cord is connected properly. All segments in the LCD window will turn on briefly. When the RSSI at the top LCD of the phone is on, service is available. The display will show the greeting, time and date.
CDMA WLL User’s Manual HTP-800/1900/810 Display in area with no service When there is no service in your area, the signal icon does not appear in the display. In this case, contact your service provider. WLL 019-240-2897 2.2.3 Installing the battery 2.2.4 Installing the Wall Bracket Before finalizing the precise location of the phone, please perform the signal strength test to ensure the best operating condition location for the assembled unit.
CDMA WLL User’s Manual HTP-800/1900/810 2.3 Getting to know your phone 2.3.
CDMA WLL User’s Manual HTP-800/1900/810 2.3.2 LCD Display Icon The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. Icons display on the screen to indicate what features you are using and the status of the phone, signal strength, and battery.
CDMA WLL User’s Manual HTP-800/1900/810 3. Basic Functions 3.1 Making Calls 1. First, check to see that your WLL Phone is turned on. If the LCD is lit, the power is on. 2. Pick up the handset or press < > to hear a dial tone. If the service is not available, you hear a no service tone (intermittent tone.) 3. Using the keypad, dial the desired telephone number. The LCD window displays the number. 4. Wait for moment or press 5. When the other person answers, begin your conversation.
CDMA WLL User’s Manual HTP-800/1900/810 3.2 Redial Redial the last number you dialed by using this feature. 1. Pick up the handset, or press < >. 2. Press To speak to the other person, pick up the handset. Calling… 019-240-2897 NOTE : You cannot redial in the above manner when the power is just on. ‘NO LAST CALL!’ will display. 3.3 Receiving Calls When you receive an incoming call, your phone will ring and blink “Incoming Call” display in LCD window . 1.
CDMA WLL User’s Manual HTP-800/1900/810 3.3.1 Caller ID Display The Caller ID feature displays the caller’s number when the phone rings. If the caller’s name and number are stored together in your phone’s memory, the caller’s name will display. Contact your service provider to activate this feature. Incoming call… 019-240-2897 missed 1 call 2/13[MO] 2:13P NOTE : If there is a missed call (the call not answered), the missed call number will display. 3.
CDMA WLL User’s Manual HTP-800/1900/810 3.5 Choosing the ring tone You can choose from ten different ring tones. 1. Press
CDMA WLL User’s Manual 1. Press < HTP-800/1900/810 >. You will here the dial tone through the speaker. Dial tone time : 20sec 2. Enter the phone number you want to call. 3. When you hear the other party answer, begin the conversation. To make a Quick Call Pick up the handset, or press < >, enter the phone number of the party you want to call, and then press . The call connects immediately. PLEASE DIAL… 3.
CDMA WLL User’s Manual 3: Alarm Tone HTP-800/1900/810 Selects Alarm Tone alarm sound(Monotone 1~6/Melody 1~4) Sets/ Release an alarm([One Time | 4: Alarm Daily] Î Set/Release Set time Æ Select Alarm Duration[minutes] Æ Confirm Tone) 1: Last Call Display the time of last call mad 2: Call Time Display accumulated call time 3: Clear Call Resets accumulated call time(Yes/No) Time 4, Logs 4: Outgoing Stores ten phone numbers called most recently 5: Incoming Stores ten phone numbers of
CDMA WLL User’s Manual 5: HTP-800/1900/810 Reset Returns the phone Phone setting(Reset/Cancel) 6: Privacy Protect to factory illegal wiretapping(standard/Enhanced) 7: IP 1. Enable/Disable Used to check your IP function number 2. IP No. setup 9 The lock code is preset to 0000 at the factory. 9 At MENU, press to return to the previous menu. 3.9 Conversion and Message Menu Ⅰ Ⅱ Mute 1: Mute During a Telephone Conversation Explanation Ⅲ function when conversation.
CDMA WLL User’s Manual HTP-800/1900/810 4.2 Storing numbers in Memory 1. Press < >. 2. Enter the desired telephone number up to 28. 3. Press . 4. Enter a name by pressing the alphanumeric keys. Note : If you do not wish to enter a name, just skip over this step. You can only input 16 letters. 5. Press 6. Press to store at an empty location displaying automatically. 7. To assign a specific location, Press a 2-digit location number between 01 and 99.
CDMA WLL User’s Manual HTP-800/1900/810 Note : If the location is empty, ‘Empty Location!’ will displays. 4. When the desired number displays. To make the call, press . To exit the function, press . [SEARCH] ◀▶ : all LOOK UP 01 Empty Location STO:name, NUM:mem LAKS Calling… [STO]:edit LAKS 4.3.2 Searching by Name 1. Press
CDMA WLL User’s Manual HTP-800/1900/810 4.4.4 Searching Confidential Number To see the phone number stored in a confidential memory location, follow these steps : 1. Press
CDMA WLL User’s Manual HTP-800/1900/810 4.5 One-Touch Calling Memory locations 01~09 are special one-touch dialing locations. You can dial the numbers stored in 01~09 by pressing one key. You do not need to precede the numbers with a zero when using one-touch dialing. 1. Pick up the handset or press < >. 2. Press and hold the number of the location number and hold it down for at least one second. 3. The number displays and dials automatically. Memory 7 019-240-2897 Calling… LAKS 4.
CDMA WLL User’s Manual HTP-800/1900/810 5.1.1 Redialing Outgoing Calls 1. Pick up the handset or press < >. 2. Press to redial the last call record, “MEMORY EMPTY” will appear with an alarm. 3. To display the phone numbers of the last 10 outgoing calls, press
CDMA WLL User’s Manual HTP-800/1900/810 This function is used for a computer service, pager, or home automation provided by a bank or a stock company. If ‘SILENT KEY’ is set, electronic dialing is not available. 5.2.1 Entering a Hard Pause You can enter a hard pause between numbers by Pressing
CDMA WLL User’s Manual HTP-800/1900/810 1. Press
CDMA WLL User’s Manual HTP-800/1900/810 conversation. TIME 01:28 019-240-2897 5.5.2 Turning on the Key tone 1. Press
CDMA WLL User’s Manual HTP-800/1900/810 No Time and Date. : Not display time and date. 3. Press . DATE TIME ▶ AM/PM Type 5.8 Setting the Alarm You can set the alarm sound daily or one time only. 1. Press
CDMA WLL User’s Manual 5.9 Checking and HTP-800/1900/810 Clearing Call 5.9.1 Checking the Last Call Time 1. Press
CDMA WLL User’s Manual HTP-800/1900/810 6. Advanced Functions 6.1 Changing greeting Message This feature lets you change the greeting message that displays when you turn on the phone. 1. Press
2. Press <5(Feature)> ‘Feature’. 3. Enter the lock Code Note : The lock code is preset to ‘0000’. 4. Press <1(Banner)> to select ‘BANNER’, Press . 5. Enter your new greeting message by pressing the alphanumeric keys. 6. Press .CDMA WLL User’s Manual HTP-800/1900/810 6.3 Restricting use of the phone You can restrict the use of the phone by unauthorized persons. There are 4 restriction modes you can choose as follows. 6.3.1 Restricting Outgoing Calls In this mode, the phone cannot originate a call. If you try to call, ‘OUTGOING CALL RESTRICTED’ will display. OUTGOING ▶ RESTRICT 6.3.2 Restricting Incoming Calls In this mode, you cannot answer an incoming call.
CDMA WLL User’s Manual HTP-800/1900/810 3. Enter your lock code. NOTE : The lock code is preset to ‘0000’ at the factory. 4. Press <2(Restrict)> to select ‘Restrict’. 5. Select the desired menu by pressing the number. ① Outgoing ② Incoming ③ Long Call ④ Intl. Call 6. Press <*(▲)> or <#(▼)> to select the status, ‘RESTRICT/CANCEL’ 7. Press ENTER LOCK CODE ------- LONG CALL ▶ RESTRICT 6.3.
CDMA WLL User’s Manual HTP-800/1900/810 NOTE: The lock code is preset to ‘0000’ at the factory. 4. Press <3(Auto Lock)> to select ‘SET LOCK ‘, and you can set the desired lock state. Choice “Never, On power up, Now Aways.” The default setting is “Never”. 5. Press <*(▲)> or <#(▼)> to select the status, ‘SET’. 6. Press to auto lock the phone. –LOCKED – displays. If you try to dial numbers, it will ask you to key in Lock Code. NOTE: The lock code is preset to ‘0000’ at the factory. 7.
CDMA WLL User’s Manual HTP-800/1900/810 6.6 Authentication Function The Authentication Key function prevents the owner’s phone number from being cloned by others. The phone has its own authentication key function. This will prohibit any illegal use of the phone. Your service provider will need to register your phone using this authentication function. 6.7 Tone Length Tone Length : Some phones you call may be able to recognize only long tones.
CDMA WLL User’s Manual HTP-800/1900/810 7.2 Call Waiting Call Waiting alerts you to a second incoming call while you are on the phone. To respond to a call waiting, press or the hooks switch. Contact your service provider to activate Call Waiting. 7.3 Three-way Calling Three-Way Calling is a feature on your phone that lets you set up a three-way conversation with two other persons. or the Hook switch is used with Three-Way Calling.
CDMA WLL User’s Manual CALL BACK NUMBER 019-240-2897 HTP-800/1900/810 SMS PRIORITY IS ▶ NORMAL MESSAGE SEND SENDING 7.4.2 Receiving Voice Message 1. If a voice message is received, ‘—VOICE MAIL—‘ and < > will display. 2. Press to connect voice mail center and hear the message. 3. Press again to call back if the caller leaves a phone numbers. Note : If the phone number is stored in the phone book with a name, the name will display instead of the phone number.
CDMA WLL User’s Manual HTP-800/1900/810 1. If a page message is received, PHONE NUMBER and, < > will display. 2. Press to call back or to erase Page message. Note : If the phone number is stored in the phone book with a name, the name will display instead of the phone number. Note : If the incoming message tone is operating, a beep tone will be sound at internals of two minutes until you check the message. If a new message is the same as the previous message, ‘DUPLICATE’ will display.
CDMA WLL User’s Manual HTP-800/1900/810 7.4.7 Erasing the Selected Message 1. Press <1> or <2>. 2. Press <*(▲)> or <#(▼)> to select the message you want to erase. 3. Press . The message will display. 4. Press once more. 5. Press again to erase the message. Press to cancel erasing. ERASE THIS MSG? ▶ ERASE CANCEL 7.4.8 Clearing All Received Messages 1. Press , <4> in sequence. 2. Press <*(▲)> or <#(▼)> to select ‘ERASE/CANCEL’ 3. Press .
CDMA WLL User’s Manual HTP-800/1900/810 7.5 Data/PC Fax The PC Fax & Modem menu is used to set the phone to data receive mode when using Data Service to receive a facsimile to PC or when communicating to PC. 7.5.1 Definition HTP-800/1900/810 provides Data and Fax service. It is capable of transmitting and receiving Data or Facsimile information through a wireless path by being connected to a Notebook (or Desktop PC). The following services are available.
CDMA WLL User’s Manual HTP-800/1900/810 using the Smart Card interface standard ISO/IEC 7816. R-UIM Specification is TIA/EIA/IS-820 and R-UIM Addendum1 is TIA/EIA/IS-820-1. 7.6.2 Card connect 1. open the battery & UIM cover under the phone case 2. connect the UIM card as blew 3. put the cover back on after phone connection test (Before Connect) (After Connect) NOTE : Turn off the phone whenever you insert or remove UIM card. 7.7 IP Function IP(Internet Phone) function is used to only China. 1.
CDMA WLL User’s Manual HTP-800/1900/810 8. Troubleshooting 8.1 Troubleshooting Problems What To Do - Check and see if the power supply is connected No display of the phone at all. properly and in a good manner. - Check if Battery switch is turned on. Mal-operation while in use or - Turn off and on of the power supply and if the same no operation symptom occurs, contact the service center. - Wait for 2 minutes after the power supply is turned “No Service” is displayed on on.
Safety Information SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.Sparks in such areas could caus e an explosion or fire resulting in bodily injury or even death. . INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver.It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government.These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.