HANTEL FLEX Function button PAGER Read button Caution : Any changes or modifications in construction of this device which are not expressly approved by responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that device does not harmful interference.
USER MANUAL 1.Controls The. PERCOMM has 2 push buttons ( Read and Function buttons ) for the pager controls and operations. A. Read button . Used to read the received messages . Used to exit to current function mode . Used to select functions . Used to delete a message B. Function button . Used to select functions . Used to set the lock and unlock the message 2.
. Message display and read message When a message is received, the pager alerts with either audio or vibration (depending on alert mode set). The word "1 NEW" is displayed. If there are 2 unread messages, the word "2 NEW" Ê While the standby screen is displayed, press the read button to display the first received message. Ë Pager automatically stores incoming messages, along with the time each message is received. Press the read button to display next message.
Ë Press the function button to display "LOCK" Ì Press the read button to lock the message,. "LOCKED" is displayed. When you read a message and try to lock it, if the number of the locked message received is more than 5, "LOCK FULL" is displayed on the LCD. A locked message can be unlocked in the same way. when the locked message is confirmed, "Lock icon" is displayed in the upper part of screen. Ê Select the locked message to want to unlock. Ë Press the function Button : "UNLOCK?" is displayed.
Ë Press twice the function button . "CLEAR ?" will be displayed. Ì Press the read button. "CLEARED" will be displayed. After that the message will be deleted. 6. Power on Insert battery into the battery compartment and close the battery door. The pager alerts with full display lit. and it will go into standby mode which is a state of capable of receiving a message. 7. Select function menu.
There are two alert modes ; vibration/audio ¶ While in standby mode, press Function button for more than 2 seconds. Screen shows "AUDIO ?" or "VIBRATION ?" This screen shows unselected mode. < State of audio mode > < State of vibration mode > · Press the read button to enter the displayed mode < State of vibration mode > < State of audio mode > 9. PAGER OFF While in pager off, pager shows only date and time. It can't receive message at this mode. But alarm feature is operating normally.
Select alarm on ¶While in standby mode , press the function button for more than 2 seconds. and choose "SET ALARM ?" · Press the read button, pager shows "ALARM ON" ¸ Press the function button , pager is in alarm setting mode.. The hour digits blink. ¹ To press the read button enables you to set time. º To repeat above procedure enables you to set time, minute and AM/PM » After setting your desired time, pager is in standby.
¸ Press the read button one more time "ALARM OFF" appears. ¹ Press the function button pager is in standby as well as select alarm off mode. 11. SELECT SILENT/AUDIO/MELODY You can choose the alert mode, audio or melody, according to your preference . Silent mode is useful in sleeping or meeting. ¶ While in standby mode, press the function button for more than 2 seconds choose the wanted function mode. Press until pager shows " SET ALERT ?" · Press the read button pager shows present chosen mode.
¹ Press any button then stop melody/audio . After that press Function button, chosen melody is decided. 12. CLEAR ALL This function mode is capable if only all received messages are more than 2 ones. ¶ While in standby mode, press the function button for more than 2 seconds choose the wanted Function mode. Press until pager shows " CLEAR ALL ?" · Press the read button, all received messages are cleared. But unread or locked ones are not cleared. 13.
¹ Set up the date you desired º Repeat the procedure for minute , hour and AM/PM field. » Press Read button, "GPS ON" appears. ¼ Press Read button, select "GPS ON/OFF " ½ Press Function button, setting is over. Pager is in standby mode. 14.