MANTEL FLEX PAGER BARNABY EOD £59882803683 Function button ~~ Read button Caution : Any changes or modifications in construction of this device which are not expressly approved by responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
USER MANUAL 1. Controls The pager has 2 push buttons (Read and Function buttons) for the pager controls and operations. A. Read button . Used to read the received message . Used to exit to current function mode . Used to select functions . Used to delete a message B. Function button . Used to select functions . Used to set the lock and unlock the message 2.
. Message display and read message When a message is received, the pager alerts with either audio or vibration (depending on alert mode set). The word "1 NEW” is displayed. If there are 2 unread messages, the word “2 NEW" TEL @ While the standby screen is displayed, press the read button to display the first received message. Tre i oro ® OVE TE ros Pager automatically stores incoming messages, along with the time each message is received. Press the read button to display next message.
@ Press the function button to display “LOCK” @ Press the read button to lock the message. "LOCKED" is displayed. When vou read a message and ry to to lock it, if the number of the locked message received is more than.5, “LOCK FULL" is displayed on the LCD. A locked message can be unlocked in the same way. when the locked message is confirmed, "Lock icon” is displaced in the upper part of screen. @ Select the locked message to want to unlock, Lhd c @ Press the function Button : "UNLOCK?" is displayed.
@ Press twice the function button . "CLEAR ?” will be displayed. Press the read button. "CLEARED" will be displayed. After that the message will be deleted. ® rm) 6. Power on Insert battery into the battery compartment and close the battery door. The pager alerts with full display Lit. and it will go into standby mode which is a state of capable of receiving a message. . T J £9-0( 05:00P 7. Select function men.
8. Set VIBRATION/AUDIO There are two alert modes ; vibration/audio @ While in standby mode, press Function button for more than 2 seconds. Screen shows "AUDIO 2” or "VIBRATION ?" This screen shows selected mode. T Hugo ¥ < State of audio mode > ® T STL Inn ~ < State of vibration mode > @ Press the read button to enter the displayed mode noes < State of vibration mode > i Fog State of audio mode > 9. PAGER OFF While in pager off, pager shows only date and time. It can’t receive message at this mode.
10. ALARM on/off Select alarm on @While in standby mode , press the function button for more than 2 seconds. and choose "SET ALARM Press the function button , pager is in alarm setting mode. The hour digits blink. ore ne @ To press the read button enables you to set time. | Fuse. rut i Lat repeat above procedure enables vou to set time, minute and AM/PM ® After setting your desired time, pager is in standby. "A T Fug urd yr .
@ Press the read button "ALARM ON” appears. © A HEIFER @ Press the read button one more time "ALARM OFF" appears. Zaporozhye i ALY [A ERE ® Press the function button pager is in standby as well as select alarm off mode. ® T FOS noe 11. SELECT SILENT/AUDIO/MELODY You can choose the alert mode, audio or melody, according to your preference . Silent mode is useful in sleeping or meeting. @ While in standby mode, press the function button for mare than 2 seconds choose the wanted function mode.
@ Press any button then stop melody/audio . After that press Function button, chosen melody is decided. CLEAR ALL This function mode is capable if only all received messages are more than 2 ones. @ While in standby mode, press the function button for more than 2 seconds choose the wanted Function mode. Press until pager shows ” CLEAR ALL ToT I ; LEA HLL ~ @ Press the read button, all received messages are cleared. But unread or locked ones are not cleared.
@ Press the function button, the date digit blinks. FOZ LT FS TT LAH Set up the date you desired Tia! oe Lia aoe | © Repeat the procedure for minute , how and AM/PM field. n-NE JOR @ Press Read button, “GPS ON” appears. yor 1 @ Press Read button, select "GPS ON/OFF @ Press Function button, setting is over. Pager is in standby mode. Te T 1 Volts 301d n-02 We dor 14.