Congratulations on your purchase of a Pager. Your new pager will instantly keep you in touch with everyone important. The pager is reliable and easy to use as well as affordable, and provides many features that incorporate the most advanced electronic paging technologies. Please read this manual carefully before using your pager for a better understanding of pager operation.
CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
1.
2. BUTTONS READ BUTTON h h h Read messages Select seting and features in Function Turn pager on FUNCTION BUTTON h h Enter Function mode mode Turn the light on or off * Press the Read Button and Function button simultaneously to escape from the current mode.
3.
4. TURNING PAGER ON < Power off mode> Press and hold the Read button for 2seconds while pager is in the Off mode. Time and date will appear on the bottom center of the screen. Upon inserting a battery, pager will vibrate and beep briefly as it enters the normal reception mode. < Stand by screen> If unread new messages are, new icon and the number of unread messages are displayed on the screen. And if all messages are read, the number of messages in memory is displayed.
5. TURNING PAGER OFF Press the Function button to enter the Function mode. Press the Function button repeatedly until "POWER OFF?" is displayed on the screen. Press READ button to enter Pager Off mode. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
6. RECEIVING AND READING MESSAGES When a message is received, the selected Alert will be activated. Press the Read button to stop the Alert and to read messages. The following information will be displayed in the order of the newest to the oldest message: Message number, time stamp and message. Reading messages with 13 Characters or more messages with 13 or more characters will display " " at the top right corner of the screen. Press the Read button to read the rest of the message.
7. DUPLICATE MESSAGES Duplicate Message Indicator will be displayed on the screen when the pager receives a message that is identical to a message in memory. 8. LOW BATTERY INDICATOR When the battery capacity falls below the operational level, the Low Battery icon will be displayed and the voltage alarm tone will be activated.
9. LOCKING AND UNLOCKING MESSAGES A maximum of 14 messages can be locked. Select a message to be locked and press the Function button. When "LOCK?" is displayed, press the Read button to lock the message. The Lock icon will be displayed, and the message will be locked. To unlock messages, select the message to be unlocked and then press the Function button to display "UNLOCK?" on the screen. Press the Read button.
10. MEMORY Pager has the memory capacity to store 30 numeric messages, with a maximum of 20 characters per message.
11. DELETING INDIVIDUAL MESSAGES To Delete Individual Messages: After reading messages, enter into Function mode by pressing the Function button repeatedly until "DELETE?" is displayed on the screen. Press Read button, Message is delete.d and another message is displayed. To Delete a Locked Message: It is necessary to convert the locked message into unlocked condition before the message can be deleted.
12. DELETING ALL MESSAGES Deletion of All Messages: Press the Function button to enter the Function mode. To display "DELETE ALL?"sign, press Function Button repeatedly. On "DELETE ALL?"sign, press Read button to delete all message except locked messages and Unread message. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
13. CHANGING ALERT STATUS Press Function button to enter the Function mode. Press the Function button repeatedly until "ALERT?" is displayed on the screen. Press the Read button repeatedly until desired Alert is selected. Press the Function button to complete the process. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
14. ALARM Press the Function button to enter the Function mode. Press the Function button repeatedly until "ALARM?" is displayed on the screen. Press Read button on "ALARM?" indicator to enter into Alarm-setting mode. To choose and set desired condition, press Read button to toggle (Ex. YES NO). To move to each field (hour, minute, am/pm), press the Function button. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
15. TIME AND DATE Press the Function button to enter the Function mode. Press the Function button repeatedly until "TIME?" indicator is displayed on the screen and press Read button. Time/Date setting process is exactly the same as Alarm setting process. Press the Read button to change to time or date, then press the Function button to move to the next field. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
16. AUTOMATIC ON/OFF (OPTION) Press Function button to enter the Function mode. Press the Function button repeatedly until "AUTO ONOFF?" is displayed on the screen. Press the Read button on "AUTO ON-OFF?" indicator to enter into Automatic On-Off mode. Automatic On-Off time setting process is the same as the Alarm setting process. Press the Read Button and Function button simultaneously to move to the main screen (current date and time).
17. LIGHT Press the Function button for 2 seconds to turn the light on. Press the Function button for 2 seconds again to turn the light off. 18. BATTERY INFORMATION The pager is designed to operate with a "AAA" size alkaline battery. Note: Do NOT use carbon zinc batteries.
19. CANNED MESSAGE The pager comes with 10 pre-programmed messages, which will be displayed on the LCD when the corresponding code is entered. To send a canned message: 1. Dial the pager number on a telephone and wait for a beeping sound. 2. Enter the number from 1 to 8. 3. Upon reception of a canned message, a designated melody will be activated unless Vibrate or Silence is selected.
Following is a list of pre-programmed canned message.
PRODUCT NAME : Numeric Pager MODEL NUMBER : AN1000F FCC RULES : TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.