User's Manual

ManualsBrandsHansong Technology ManualsElectronicsWireless module

HSDWAM83 user manual

1. Product Description

HSDWAM83 Hansong own module which is base on the Microchip DWAM83 module with

its own PCB antenna or the module external antenna.

It is an uncompressed wireless digital audio transceiver operation in the 2.4GHz, 5.2GHz

and 5.8GHz bands. The wireless audio link supports up to 4 stereo audio streams and

comes together with additional features such as: data encryption, Automatic Frequency

Allocation and support Kleernet.

The Basic Features

·High Quality Audio

·Networking and Connectivity

·Power Management

·Integrated 8052MCU

·Digital Audio Clock Synchronization

·Sample Rate Converter(SRC)+ Sample Rate Detector

·Kleenet

Summary of content (8 pages)

PAGE 1
HSDWAM83 user manual 1. Product Description HSDWAM83 Hansong own module which is base on the Microchip DWAM83 module with its own PCB antenna or the module external antenna. It is an uncompressed wireless digital audio transceiver operation in the 2.4GHz, 5.2GHz and 5.8GHz bands. The wireless audio link supports up to 4 stereo audio streams and comes together with additional features such as: data encryption, Automatic Frequency Allocation and support Kleernet.
PAGE 2
. Product parameter 2.
PAGE 3
2.1 Absolute Maximum Rating 2.2 Recommended Operating Conditions 2.3 module Block Diagram 2.4 Power Consumption 2.
PAGE 4
3. Product antenna The module uses embedded PCB track Tri-Band antennas. Or you can use the module with external PCB antenna or the coaxial antenna with reverse-SMA male connector. Antenna Type: module embedded PCB track antenna, module external PCB antenna(PIFI), module external mono antenna with reverse-SMA connector Antenna Gain: module own PCB antenna, 2.4G: 1.5dBi; 5G: 1.5 dBi External PCB antenna (PIFI), 2.4G: 4.2 dBi; 5G: 4.5dBi External mono antenna with reverse-SMA male connector: 2.4G: 3.
PAGE 5
Modulation: QPSK; data rate: 100Kbps 4. Product picture 4.1 module embedded antenna Top view: Bottom view 4.
PAGE 6
5. Caution: This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 7
Only for detachable antennas: This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Gain of antenna: 2.4GHz: 4.
PAGE 8
MPE Reminding To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une distance de moin de 20 cm.