WR200 WR200 WIRELESS EXTENDER Owners manual Manuel d’utilisation
www.audiopro.com www.audiopro.se © Audio Pro AB Sverige Audio Pro® , Audio Pro logotypen, ‘a’ symbolen, och ace-bass® är registrerade varumärken av Audio Pro AB, Sverige. Alla rättigheter reserverade. Audio Pro följer en policy om ständig produktutveckling. Specifikationer kan ändras utan föregående meddelande. © Audio Pro AB Sweden Audio Pro®, the Audio Pro logotype, the ‘a’ symbol, and ace-bass® are all registered trademarks of Audio Pro AB, Sweden. All rights reserved.
Wireless extender WR200 Unit 1: FCC ID: XCO-HSD81D82UT1, IC: 7756A-HSD81D82UT1 Unit 2: FCC ID: XCO-HSD81D82UT2, IC: 7756A-HSD81D82UT2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
ENGLISH Features specifications - Extended room to room: up to 20m - Extended range same room: up to 50m - Extended range in line of sight: up to 100m - Wireless range between unit 1 & 2: 10-30m - Wireless full CD quality sound - Sample rate: 48 KHz - Dedicated proprietary protocol - Master/zone volume relay Transmitting/receiving: Unit 1: 2.4GHz receiver + 5.8GHz transmitter Unit 2: 5.8GHz receiver + 2.
Functionality and performance How WR200 works The WR200 system consists of two units, 1 and 2. Unit 1 is the first unit and receives a signal (2.4GHz) from the TX100 transmitter and then relays the signal on a different band (5.8GHz) to unit 2. Unit 2 then transmits the signal on the 2.4GHz band to all speakers. Because the 5.8GHz band is stronger but shorter in range than the 2.4GHz band, WR200 will work around any difficult conditions in a house that the wifi signal encounters. We also use the 5.
BASIC CONNECTION All speakers located within range are set to the same House Code as the TX100. TX100 transmitter Range: 20-100m UNIT 1 EXTENDER CHANNEL: Set to X, Y or Z UNIT 1 HOUSE CODE: Same as on the TX100 transmitter ( 1, 2 or 3) Range: 15-30m UNIT 2 EXTENDER CHANNEL: Set to same channel X, Y or Z as on UNIT 1. UNIT 2 HOUSE CODE: Set to different House Code than TX100. Example: Set TX100 and UNIT 1 to House Code 1, set UNIT 2 to House Code 2 or 3.
example connections 1. Extending network 2. bypass difficult wall conditions 3.
4. Extending network in different directions Unit 1 sending to two or more unit 2 modules. (Unit 2 (WER202) modules of WR200 are also sold separately. 5. Extending network with up to three wr200 sets A B C If using more than one WR200 set, use different extender channels (X, Z and Y) for all sets. Change the house code accordingly; Set A: receive house code 1, send house code 2. Set B: receive house code 2, send house code 3. Set C: receive house code 3, send house code 1.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FRANÇAIS CARACTÉRISTIQUES - Extension de la transmission d’une pièce à l’autre : jusqu’à 20 m - Extension du champ au sein d’une pièce : jusqu’à 50 m - Extension du champ en visibilité directe : jusqu’à 100 m - Champ sans fil entre les unités 1 et 2 : 10-30 m - Son en qualité CD totalement sans fil - Fréquence d’échantillonnage : 48 KHz - Protocole propriétaire dédié - Volume à relais commandes/zones DESCRIPTIF Type : Prolongateur sans fil pour le réseau Audio Pro Transmission/réception : Unité 1 : récep
