The HiQ Media Chair by Klaussner® HiQ Media Chairs by Klaussner® Owner’s Manual
CONGRATULATIONS! Thank you for choosing your new HiQ Media Chair by Klaussner®. With proper installation and operation, you will enjoy years of trouble-free use. Klaussner manufactures the industry’s most complete line of furniture and is known for innovation. To see the complete Klaussner product assortment, visit us on the Internet at www.Klaussner.com.
IMPORTANT SAFETY INSTRUCTIONS (George - please go over this section with Jon 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in according with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
FEATURES AND BENEFITS • 3DS™ - (3 Dimensional Sound) isolates premium performance surround sound audio with pinpoint accuracy within the confines of the chair. • Dolby® Digital - each HiQ media chair utilizes Dolby Digital and Dolby Pro Logic II Surround Processing to further enhance your audio experience. Custom signal processing allows a full 5.1 surround experience. • Clear Voice - reduces loud music, sound effects and background noise for crisp clear dialogue.
Subwoofer and Amplifier Amp Panel Detail Selector Switches Amplifier Remote Control Functions Selects inputs 1-4 Surround volume comtrol Center channel volume control Master volume control Delay Speaker Connector 6 1/2” subwoofer Sub cabinet 120V AC Transmitter Controller On/off Input selector Tactile transducer level control IR sensor Subwoofer volume control Power indicator Mute (all speakers) Antennas 1 and 2 Multiple chair selection Digital inputs 1-4 12V DC Analog inputs 1-4 4
SET UP CONSIDERATIONS Your wireless transmitter controller and the wireless receiver built in to your furniture feature sophisticated design to maximize the range in a typical environment to a line of sight range of thirty feet. Trying to extend the range beyond this or use in a situation that is not line of sight greatly increases the odds of poor performance. Avoid placing either the transmitter controller or furniture in an area that would block wireless signals.
5. POWER on transmitter controller using remote control. 6. Transmitter will automatically sync to furniture. Basic Use Refer to page 5 for remote functions Transmitter controller power LED remains red when off, and will alternate red and blue when remote power button is pressed. Light will remain blue when synchronized with media chair. (b) Selecting items connected to your transmitter controller. (c) Simply press and release the Input key to change through the various inputs.
Delay Adjustment The video processing in today’s advanced video devices can sometimes delay the video being displayed. This can cause the sound from your audio system to be out of sync with what you are seeing. If this occurs with your Media Chair system simply press the DELAY button on your remote control. The Media Chair has 4 levels of audio delay to help you perfectly synchronize your audio and video. The amount of audio delay selected will be displayed by the Input LEDs when you press the DELAY button.
Frequently Asked Questions What cables do I need to connect media sources to wireless transmitter? Below is a list of cables needed, which are usually included in media devices. The HiQ Media Chair by Klaussner® does not include these cables. Stereo RCA jacks Coax digital TOSLINK (0ptical) 3.5mm (1/8 inch) stereo to RCA stereo jacks Will the HiQ Media Chair by Klaussner® interfere with my other home wireless products? The advanced 2.
The transmitter controller doesn’t have an HDMI input. How do I get an HD signal through the system? With the appropriate cables, connect your set-top box or DVD player digital or analog audio outputs to the transmitter controller. Can I connect an MP3 player to the transmitter controller? Yes, simply use the headphone output of your MP3 player to connect a cable that has a 3.
No matter how high I turn the back surrounds up, nothing is coming out of these speakers. Older mono broadcasts and movies will not have any surround information. And in many movies with surround information there will not be anything coming out of the surround speakers during many parts of the program when there is not any action. The lights on my transmitter controller are off, but it is plugged into the wall. Some wall outlets are switched.
Klaussner® Furniture Industries, Inc. 405 Lewallen Rd. l Asheboro, NC 27205 1.888.732.5948 l www.klaussner.
