User’s Guide H550(B15HF) TFT-LCD Monitor Table of Contents Regulatory Information .......................................................................................................................... 2 Introduction Package ....................................................................................................................................................3 The range of control Angle .....................................................................................................
TFT-LCD Monitor Regulatory Information - FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TFT-LCD Monitor Introduction - Package Congratulations on your purchase of this top quality color monitor! The items illustrated below are contained in the carton. First, be sure that your carton includes all of them. If any items are missing or damaged, please contact your local dealer or supplier. UK LCD Monitor Signal Cable U.S.
TFT-LCD Monitor Introduction - Connection to Basic Connection Signal Source ① ② ③ ④ ⑤ ① Port for AC power cable. Port for Audio cable from audio source. Port for Head Phone or External Speaker. Port for signal cable from signal source. Kensington Lock. ②③④ ⑤ 1. Use 220V or 110 V.(Free Voltage) 2. Connect monitor and Signal Source via Signal cable. 3. Power on the monitor and computer. 4. Connection is finished.
TFT-LCD Monitor Controls - Front panel MUTE BUTTON VOL BUTTON +/ MENU/EXIT BUTTON –/ SELECT/AUTO BUTTON BUTTON BUTTON POWER BUTTON (Power indicating LED) - Functions Power button Power button is located in the lower center of the Front Bezel. You can push the button to trun on/off the power. Power Indicating LED Dark : Power off Green : Normal mode Green blinking : DPMS mode or Check Signal Cable mode.
TFT-LCD Monitor Controls - Adjusting OSD Brightness & Contrast MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Brightness and Contrast ICON. 3. Press SELECT button into the submenu. Brightness – + SELECT – + 1. Use –,+ to move Brightness ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the brightness. Contrast – + SELECT – + 1. Use –,+ to move Contrast ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the contrast.
TFT-LCD Monitor Horizontal Position – + SELECT – + 1. Use –,+ to move H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display left or right. According to the characteristic of video card, control range can be changed. Vertical Position – + SELECT – + 1. Use –,+ to move V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display upward or downward. According to the characteristic of video card, control range can be changed. Phase – + SELECT – + 1.
TFT-LCD Monitor Color MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Color ICON. 3. Press SELECT button into the submenu. Preset Color – + MENU 1. Use –,+ to select the Mode 1, and Mode 2. 2. Press the MENU button to return previous state. Mode 1 : Reddish white Mode 2 : Bluish white User Color – + SELECT – + 1. Use –,+ to move User color ICON. 2. Press SELECT button to select it. 3. Use –,+ to increase or decrease each color. OSD MENU – + SELECT 1.
TFT-LCD Monitor OSD H-Position – + SELECT – + 1. Use –,+ to move OSD H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD left or right. OSD V-Position – + SELECT – + 1. Use –,+ to move OSD V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD upward or downward. OSD Time – + SELECT – + 1. Use –,+ to move OSD Time ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD display time. 4. Press Menu button to return main menu.
TFT-LCD Monitor Language MENU – + SELECT – + 1. Use –,+ to move Language ICON. 2. Press SELECT button to select it. 3. Use –, + to select language. Factory Reset – + SELECT 1. Use –,+ to move the Factory Reset ICON. 2. Press SELECT button to return to default setting Information MENU – + SELECT 1. Use –,+ to move the Information ICON. 2. Press SELECT button to select it. You can know display information * Accoding to the characteristic of video card, display information can be incorrect.
TFT-LCD Monitor Power Management Feature The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association(VESA). The power management feature requires that the video card of the computer should support DPMS function.
TFT-LCD Monitor Specifications B15HF ITEM LCD Panel Synchronization Video Input Type Amorphous active matrix super TFT LCD Screen Size 38.1cm (Diagonal) Maximum Resolution 1024 X 768 @ 75Hz Pixel Range 0.297mm X 0.297mm Display Colors 16.7M Color Contrast Ratio 350 : 1 Viewing Angle 60° / 60° / 40° / 60° (Left / Right / Up / Down) Response Time 25 msec Luminance 250 cd/m2 Horizontal Frequency 60 kHz(Max.) Vertical Frequency 75 Hz(Max.) Video Signal Analog RGB (0.
TFT-LCD Monitor Pin assignment table D-Sub Mini 15pin connector Pin No. Assignment 1 Red Video 2 Green Video 3 Blue Video 4 N.C 5 Ground 6 Red Video Ground 7 Green Video Ground 8 Blue Video Ground 9 5V Input 10 Ground 11 Ground 12 SDA 13 H-Sync. 14 V-Sync.
TFT-LCD Monitor Troubleshooting Problem Solution Power LED is dark. No picture. Check the power connection (Refer to Introduction) OSD, “check cable.” is displayed on the screen. Check the computer power is on. Message, “No cable.” is displayed on the screen. Check the signal cable between monitor and computer. (Refer to Introduction) Screen looks to be run down. Perform Auto-config. Remove attaches to the signal line(Video extension cable and others) and switch on.