User's Manual

ManualsBrandsHans Turck ManualsElectronicsRFID Reader

read/write head

TN-Q14-0.15-RS4.47T

Edition • 2015-08-27T10:30:28+02:00

1 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com

Type code TN-Q14-0.15-RS4.47T

Ident no. 7030235

Mounting conditions non-flush, flush mountable

Ambient temperature -25…+70 °C

Operating voltage 10…30VDC

DC rated operational current

ð 75 mA

Data transfer inductive coupling

Operating frequency 13.56 MHz

Radio communication and protocol standards ISO 15693

Read/write distance max. 72 mm

Output function 4-wire, read/write

Construction rectangular, Q14

Dimensions 56x 30x 14mm

Housing material plastic, PBT, yellow

Material active area plastic, PBT, yellow

Connection male, M12 x 1

Vibration resistance 55 Hz (1 mm)

Shock resistance 30 g (11 ms)

IP Rating IP67

MTTF 391 years acc. to SN 29500 (Ed. 99) 40 °C

Power-on indication LED green

Packaged quantity 1

Special features Flat design

■ Rectangular, height 14 mm

■ Active face on top

■ Plastic, PBT-GF30-VO

■ Powered and operated only via BL ident

interface module

■ Male M12 x 1, only for use with BL ident

extension cable

Connectors …/S2503

Connectors …/S2500

Connectors …/S2501

Functional principle

The HF read/write heads operating at a fre-

quency of 13.56 MHz form a transmission

zone the size of which (0…500 mm) varies,

depending on the combination of read/write

head and data carrier.

The read/write distances mentioned here on-

ly represent standard values measured under

laboratory conditions.

The read/write distances of the data carriers

for mounting in metal TW-R**-M(MF) were de-

termined in metal.

Attainable distances may vary by up to 30 %

due to component tolerances, mounting con-

ditions, ambient conditions and material quali-

ties (especially when mounted in metal)

Testing of the application under real operat-

ing conditions is therefore essential, especial-

ly with read/write on-the-fly!

Summary of content (6 pages)

PAGE 1
read/write head TN-Q14-0.15-RS4.47T ■ Rectangular, height 14 mm ■ Active face on top ■ Plastic, PBT-GF30-VO ■ Powered and operated only via BL ident interface module ■ Male M12 x 1, only for use with BL ident extension cable Connectors …/S2503 Type code Ident no. TN-Q14-0.15-RS4.
PAGE 2
read/write head TN-Q14-0.15-RS4.47T Data carrier Dimensions Type designation Ident - no. TW-R7.5-B128 Read-write distance Transfer zone Minimum distance between two readwrite heads Recommended (mm) max. [mm] length max. [mm] width offset max. [mm] [mm] 10 30 28 14 90 11 33 31 15 90 20 38 44 22 90 22 40 34 17 90 17 31 32 16 90 22 43 56 28 90 23 42 50 25 90 7030231 TW-R9.
PAGE 3
read/write head TN-Q14-0.15-RS4.47T Data carrier Dimensions Type designation Ident - no. TW-R50-B128 Read-write distance Transfer zone Minimum distance between two readwrite heads Recommended (mm) max. [mm] length max. [mm] width offset max. [mm] [mm] 40 72 76 38 90 30 58 76 38 90 25 54 57 28 90 25 55 71 35 90 5 15 21 10 90 14 29 30 15 90 10 24 34 17 90 6900504 TW-R50-K2 6900507 TW-L49-46-F-B128 7030390 TW-L80-50-P-B128 7030389 TW-BS10X1.
PAGE 4
read/write head TN-Q14-0.15-RS4.47T Data carrier Dimensions Type designation Ident - no. TW-R50-M-B128 Read-write distance Transfer zone Minimum distance between two readwrite heads Recommended (mm) max. [mm] length max. [mm] width offset max.
PAGE 5
Edition • 2015-08-27T10:30:28+02:00 read/write head TN-Q14-0.15-RS4.47T 5/5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.
PAGE 6
Qty 1 Type TN-Q14-0.15-RS4.47T Ident-No. 7030235 10...30 VDC 1615H Warning:Hazardous voltage can cause electrical shock and burns. Disconnect power before proceeding with any work on this equipment. Made in Germany Hans Turck GmbH & Co. KG · Witzlebenstraße 7 · 45472 Mülheim/Ruhr · Germany Phone +49 208 49 52-0 · Fax +49 208 49 52-264 · more@turck.com · www.turck.