HANNSpad SN1ATP5(HSG1415) User’s Manual
English Contents Precautions ..................................................................................................................... 4 Declaration ...................................................................................................................... 5 What’s in the box ............................................................................................................ 6 1. Product Overview................................................................................
English Control information This device is in accordance with the requirements in Radio Equipment Directive 2014/53/EU This device complies with the requirements in EMC Electromagnetic Compatibility Directive 2014/30/EU and Low Voltage Directive 2014 /35/EU. The highest CE SAR value for the device is 0.7 W/Kg and the SAR limit is 2.
Preventing Hearing Loss English Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. This device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1 and/or EN 50332-2 standards. Trademark Notice: Hannspree products incorporate High-Definition Multimedia Interface (HDMI TM) technology.
English Precautions For the correct use and good performance of the device, the user must fully understand the manual as well as strictly follow the instructions provided. Please avoid high temperatures (over 35°C) or low temperatures (below 0°C). Never knock the main machine violently. Never let the device come in contact with chemicals such as benzene, thinner etc. Do not let the device get close to strong magnetic field, electric field etc.
English Declaration 1. The information in this manual may not, except under written license by The Company, be copied, transmitted, distributed, or stored. 2. Although efforts have been made for the correctness and completeness during the preparation of the manual, there is no guarantee that this manual is free from any error or omission. The Company assumes no reliability regarding the errors or omissions that might exist in the manual. 3.
English What’s in the box Check Supplied Items Tablet PC SN1ATP5 (HSG1415) NOTE: The included adapter head may vary depending on the region. The illustrations in this document may appear differently from your model. This Quick Start Guide and a Warranty card are also included. If any item is damaged or missing, contact your point of purchase for assistance. Use only approved accessories. Accessories may vary by country or region.
English 1. Product Overview 1.1 Front View 1 2 No. 2 Item Description 1 Front Camera For video chatting or taking self-portrait pictures. 2 Speaker Emits sound output About the Power key: Power on: Press and hold the key for 3 seconds until the device is turned on. Power off: Press and hold the key until the option menu appears on the screen. Select Power off and tap OK to turn the device off.
2 3 4 5 6 English 1.2 Back View 7 8 1 No. Item Description 1 Reset Hole Insert a small pin or other sharp object into the reset hole to restart the Tablet . 2 Power buttons Connects the device to charge the battery. 3 Volume Keys Press to adjust the volume. 4 Back camera For taking pictures or recording videos. 5 Earphone Jack Connects to an earphone using a 3.5 mm audio jack. 6 HDMI Port Output images using HDMI cable (sold separately) to an HDMI television or display device.
English 2. Initial Operation 2.1 Managing and Charging the Battery Before using the tablet PC for the first time, fully charge the battery. This tablet PC has a built-in polymer battery; use only the dedicated charger to charge the device. In order to prolong the service life of the device, use the device until the battery is depleted before charging the battery the first two times. To charge the battery, connect the charger / adapter to the device.
A Wi-Fi connection makes it easy to connect to the Internet. Once you have successfully connected to a Wi-Fi network, the device will automatically connect to the network when you are within range. To configure the Wi-Fi connection, do the following: 1. Tap and drag the status bar downward to open the notification panel. 2. On the Quick Settings screen, tap SETTINGS. 3. Turn on Wi-Fi.
5. If prompted, enter the password to connect to the AP. English NOTE: • The password entry is required only when connecting to the AP for the first time. • To make the Wi-Fi password visible while typing it, select the “Show password” checkbox. 6. Tap Connect. NOTE: • Some public places offer free wireless internet access. This means no password is required to establish the connection. • For secured networks, you may need to enter several parameters to complete the settings.
Use the supplied USB-A to Type-C cable, connect the device to the PC to transfer data or power up the device. NOTE: If the battery power is lower than 4%, the device cannot be turned on. 2.4 Use Micro SD card After connecting the device to a PC, you will find two removable disks, the front one is the built-in-memory disk, the other one is the Micro SD card disk. If there is no card plugged in, the second disk cannot be opened. The device supports up to 32GB Micro SD card expansion.
English 3. The Android Interface 3.1 Home Screen After powering on the device, the locked Home screen is displayed. After you unlock the screen, the main Home screen appears. The following describes the main touch screen area and some tips on how to use the touch screen.
Navigation Bar Description Back key ( ) Tap to return to the previous screen. Home key ( ) Tap to return to the Home screen. Switch app ( ) Swipe to view the most-recently accessed applications. To access the specific application, tap directly on the icon. English Item 3.2 Customizing the Home Screen Panels You can customize the wallpaper of your Home screen with the default wallpaper or with the photos stored in the device.
English 3.4 Creating Application Folders You can combine several similar applications in a folder. Simply, drag one application icon over another application icon and release it. A folder is automatically created. 4. System Firmware Update Android devices automatically receive over-the-air (OTA) updates. To manually check for a firmware update, select Settings > System > System update >Check for update .
Platform Storage Display Communications Sensor I/O Port HW button Power Operating System Android 10 Processor MTK8168 Cortex-A53 Octa 2.0 GHz Memory 3GB Storage 32GB eMMC Brightness LCD Panel with LED backlight, 250 cd/m2 Resolution 10.1 inch, 800x1280 Type Capacitive type Sensor (points) Multi touch WLAN WLAN (802.11 b/g/n/ac) Bluetooth BT5.0 Camera Front camera: 2MP Rear camera: 5MP (AF) G Sensor Yes, resolution: 10 bits Headphones 3.5mm x1 Microphone Built-in USB 2.
English 6. Appendix Warranty and Service Warranty and service and related information, please refer to, the warranty card or Hannspree support site below for further help and support with your device including how to install software updates if available and much more: http://www.hannspree.eu/ FAQ FAQ (Frequent Asked Questions) please refer to the below link: http://www.hannspree.
