User Guide

Table Of Contents

Step 3

Press and hold the CLK/MEM Button

on top left of unit for 2 seconds and

release once display blinks.

Step 4

Press the HR Button on top of unit

to adjust the HOUR.

NOTE: The PM indicator will light when

the hour is set for PM. There is no AM indicator.

TIME SETTING

Step 6

Press the CLK/MEM Button

to complete time setting.

Step 1

Plug unit into working outlet. If the

time display blinks “12:00” skip to step 3.

Otherwise, continue to step 2.

Step 2

Make sure unit is OFF(Clock Mode).

To confirm unit is off, press and hold the

ALM OFF/SOURCE Button on

top right of unit once or twice until OFF

appears in display.

Step 5

Press the MIN

Button on top of

unit to adjust the MINUTE.

HX-100 QUICK START GUIDE

P.1

PAGE 1
HX-100 QUICK START GUIDE TIME SETTING Step 1 Plug unit into working outlet. If the time display blinks “12:00” skip to step 3. Otherwise, continue to step 2. Step 2 Make sure unit is OFF(Clock Mode). To confirm unit is off, press and hold the ALM OFF/SOURCE Button on top right of unit once or twice until OFF appears in display. Step 3 Press and hold the CLK/MEM Button on top left of unit for 2 seconds and release once display blinks. Step 4 Press the HR Button on top of unit to adjust the HOUR.
PAGE 2
HX-100 QUICK START GUIDE ALARM SETTING Step 1 Make sure unit is OFF(Clock Mode). To confirm unit is off, press and hold the ALM OFF/SOURCE Button on top right of unit once or twice until OFF appears in display. Step 2 Set to Buzzer Press and release the ALM1 Button (or ALM2 Button) repeatedly as needed to cycle to desired alarm mode: Buzzer(default), Radio(last station played) or OFF(alarm is no longer active).