User's Manual

Wi-Fi Door/Window Sensor User Manual

HKSWB-DWS09

Note: If you have any questions about the APP or device, please click Profile

->Feedback to fill your feedback to us in APP.

1. PRODUCT REVIEW

This Door/Window Sensor is a Wi-Fi, battery powered reed sensor, including

device part and magnet part. Working with APP together in your mobile phone, once

the state changing (close or open) detected, the device will wake up the Wi-Fi

connection to Wi-Fi router, send an alarm signal to your mobile phone via Wi-Fi

network, in the case that the APP internet is available locally or remotely. The alarm

is selectable as a notification on your mobile phone with bar display, banner with tone,

vibration based on the APP Notification setting on your Mobile Phone. There is an

around 2-second delay from the state changes to notification on your mobile phone

depending on the internet connection quality.

Besides working with APP, this device is compatible with Amazon Alexa and

Google Home to check the device state (close or open), such as “Alexa, is the door

open/closed?” or “OK Google, it the door on/off?” after the device linked to Alexa

account and Google Home account correctly.

This device is working as a scene to trigger other device action that are

compatible in same APP such as to turn on/off plug and bulb.

This device can be installed on Door, Window and Drawer, which one part is the

frame and the other part can be moved.

PAGE 1
Wi-Fi Door/Window Sensor User Manual HKSWB-DWS09 Note: If you have any questions about the APP or device, please click Profile ->Feedback to fill your feedback to us in APP. 1. PRODUCT REVIEW This Door/Window Sensor is a Wi-Fi, battery powered reed sensor, including device part and magnet part.
PAGE 2
.              PRODUCT FEATURES Working in 802.11 b/g/n 2.
PAGE 3
Latch button LED Button Tamper button Device Part Magnet Part 1) Latch button: press the Latch button to take apart the battery cover from the device part in order to change the batteries or setup the Wi-Fi network. 2) Button: Long press for 5 seconds this button to enter the Wi-Fi network mode.
PAGE 4
Vector error EVM 802.11b:≤35% 802.11g:-28dBm max. 802.11n:-29dBm max.@MCS7_HT20 Working temperature -10 ~ +40℃ Storage temperature -20 ~ +60℃ Relative humidity 8% ~ 80% FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.