User Manual

ManualsBrandsHangzhou Xizhi Electronics ManualsCamera & PhotoDoorbell Camera+Chime

Doorbell Camera

The Doorbell Camera sends a notification and a photo-stitch when it senses motion or

when the doorbell button is pressed.

Your Chime will also sound a tone to let you know someone is at the door.

The Chime also help to ensure your doorbell has a strong WiFi connection, place these

products as close to the doorbell as possible.

What's in the BOX

Doorbell camera x1

Chime x1

AA battery x3

Manual x1

Screw bag x1

Adhesive x1

Get Started

Download the iOS or Android "Tuya Smart" app and have your WiFi password handy.

Turn on your phone's Bluetooth, you can turn it off after setup. (To turn it on, go to

Settings on your phone, select and turn it on.)

Make sure your network is 2.4GHz and working well.

Make sure the batteries are aligned correctly and working well.

Setup the doorbell camera first. The app will guide you step-by-step.

Link the Chime to your Doorbell Camera

Plug in the outlet

Wait for few seconds until chime's indicator light begin blinking slowly (If not, try to

reset the chime)

Press the doorbell button to pair with chime

If succeed, the doorbell will sound together with the doorbell, and chime's indicator

light will go off

Note: you can press "the volume button" for 5s to reset the chime

Summary of content (5 pages)

PAGE 1
Doorbell Camera The Doorbell Camera sends a notification and a photo-stitch when it senses motion or when the doorbell button is pressed. Your Chime will also sound a tone to let you know someone is at the door. The Chime also help to ensure your doorbell has a strong WiFi connection, place these products as close to the doorbell as possible. What's in the BOX 1. Doorbell camera x1 2. Chime x1 3. AA battery x3 4. Manual x1 5. Screw bag x1 6. Adhesive x1 Get Started 1.
PAGE 2
Install your Doorbell Camera 1. Support Peel & Stick and Screw Mount 2. You can install doorbell camera following the steps as follow. 3. Install the doorbell camera in the blue area. shown below for the best photos.
PAGE 3
How to Reset your Doorbell Camera（需要有示意图） 1. Remove the front cover of the doorbell 2. Press the doorbell button for 15s until the indicator light begin blinking slowly MOTION DETECTION 1. Your Doorbell Camera has a 60° viewing angle and monitor a distance of up to a 3m, in an arc 70° left and right. 2. When the doorbell detects motion, a notification with a photo-stitch will be sent to your phone. 3. Motion detection sensitivity and distance are customizable in the app.
PAGE 4
Chime Specs 1. Power Source: 100-120V~50/60Hz 2. Operation temperature：-10℃ to 45℃ 3. User Location: Indoor use only 4. Mounting Method: Plug in the outlet Troubleshooting 1. If you're having trouble pairing, try to reset the device 2. The new setting from APP will be effective by the next button press or motion trigger or auto apply if not triggered in 12hrs 3. When you press the doorbell button, the indicator light will be on. If not, check the batteries have run out or not.
PAGE 5
- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the re ceiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolle d environment. This equipment should be installed and operated with minimum distanc e 20cm between the radiator & your body.