User's Manual

Power
Emission current：<12mA Standby current：<1uA
Protection index：IP30 Transmitting frequency
code：rolling code
： Battery model：
：433.92MHz
3V CR2032
wiring
2
1 channel 2channel
3
channel
code learning
3
1)Short press the learning button
at the backside once
3)
motor after successful learning
The emitter could control the
2
within 10s, the motor will vibrate twice
)Press the channel button chosen once
1
2
1
Remakes:after learning successfully, the step by
specific operation
4
Code deleting
5
Technique Specifications
1
01
1)Short press the learning button
at the backside once
1
1
1
!
The emitter is compatible with all the receivers in our company,
the instruction will illustrate with RC006 for example
.
Announcement
Setting may fail due to the interference of signal. If in this case, please reset.
Please do not press buttons for too long in case life span of battery declines. The button press should be
about 0.5s with 1S interval .If the battery is in low power, please replace battery.
The control unit is of high voltage. Please do not place it in humid atmosphere.
Children should be supervised to ensure that they do not play with the appliance.
Ambient temperature:-10℃~+55℃.
All products are as per material subjects if there is change in appearance, color, function etc. The information
is subject to changes without prior notice.
AC Power
blue
b
r
o
w
n
blue
b
r
o
w
n
/b
l
ack
b
l
a
ck
/
b
row
n
L
N
ground
manual switch
learning button
1)Press the channel button first time,
the motor will run upward
2)Press the channel button second time,
the motor will stop.
3)Press the channel button third time,
the motor will run downward.
4)Press the channel button fourth time,
the motor will stop.
Remarks: the operation will be in sequence,same as other channel
2)Long press the button chosen once
till motor vibrate once,then release
3)Code deleting is successfully
Battery:Rated Voltage: 3V
Capacity: 210mAh
User manual
Model:WSRE110,WSRE110-3C
Brand:WISTAR