Scan for Wechat Account Sciener Scan to download APP www.kejixia.cn Sciener Smart Lock M503 Manual Address: 4th floor, Building 17, Innovation Park, Wenyixi Road 998#, Yuhang District, Hangzhou, Zhejiang Province, PRC Web: www.kejixia.cn Copyright: Sciener 2017 Email: contact@sciener.cn Hotline: 400-0658-851 171219 - VER3.
Parts list Please read the manual before installation carefully and keep this manual at a secure place. ● Please refer to sales agents and professionals for information not included in this manual. For more support, please call 0571-81902879 /86 15381172306. ● Door lock frame must be greater than 110mm, and door thickness must be between 35-45 mm Package list: ● We reserve the right of upgrading the product without prior notice.
Adjust the lock before installation Install latch/deadbolt and cylinder ● Please install under the guidance of a professional ● In case of special circumstances, Please handle with care to avoid damage! Back panel Front panel Pull out the cables from the front and back panel, and connect them as shown in the figure Screw Pair the lock with APP Pair with App using bluetooth Important Screw After power is on, while the front panel touchscreen backlight is off: Direction 1.
Install front/back panel Installation steps: Lock body: Fix the lock body (figure 1) with two screws 8 (figure 2) Front panel: Fix the rubber pad on front panel and press it on the door (figure 3). Pull the power cable through the holes in the door (figure 4) , the iron plae (figure 5) and fix the iron plate with screws.
Install batteries and cover Adjust door opening direction Pull up the slide cover of the back panel, install 4 AA batteries and push the cover back to its original position. When install the lock, please adjust the left-right switch in the back panel to match the actual opening direction of the door.
Care and Maintenance ● 1. Please keep the lock from direct contact with corrosive liquids. ● 2. Please do not hang anything on the door handle. ● 3. If the door deforms, please adjust the strike plate accordingly, so that the bolt can stretch fully into the strike plate. ● 4. Please replace with new batteries when the low battery warning is prompted. ● 5. Please keep the mechanical keys at a secure place.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.