Instruction Manual

Instruction Manual
Gateway
The Dusun Smart Gateway is the
"brain" of control for smart devices.
Used to connect and control a variety of
intelligent sensors and controllers.
Create and manage various smart life
scenarios through smart home clients,
and realize intelligent device automa-
tion linkage
Product Description
Network indicator
Power Indicator
Signal indicator
Power hole
Cable hole
SIM Card
LAN
WLAN
Indicator Description
Power Indicator
The green light is always on, the
gateway is powered on, the green light
is off, and the gateway power is off.
Signal indicator
The yellow light flashes, that is, the
gateway is communicating with the
child device.
Network indicator
The red light is always on, that is, the
gateway cannot connect to the
network.
The red light is off, indicating that the
network is communicating normally.
Pairing button
LAN port - You can use a computer to
connect to the LAN port of the gateway
through a network cable.
Login URL: 192.168.66.1 Account: root
Password: root, you can enter the
debugging page of the gateway.
WLAN port - This port allows the
gateway to connect to the LAN.
Jack Description
Support 2G,NB-IoT,eMTC
SIM card slot Reset hole
Device reset :Long poke reset hole for
more than 8s, the gateway enters the
reset mode, after the completion, the
factory settings will be restored, and all
the pairing information in the gateway
will be cleared.
Device Access
Search for "Smart Life" in the app
store to download the smart device
client.
Power on the gateway. At the same
time, the network cable connects the
WLAN port of the gateway to the
LAN port of the router. The mobile
phone connects to the wifi of the
router to ensure that the mobile
phone and the gateway are in the
same network.
1
2
3
Open the Smart Life app and follow
the prompts to quickly connect to the
new device, or add the gateway you
want to connect via the “+” in the
upper right corner. Follow the
prompts to continue.
4
After the gateway is successfully
connected, refer to the “Add Device”
section of the sub-device manual.
After the addition is successful, you
can view the sub-device list on the
gateway device page and set the
scene.
Select the center location of the smart
device to be installed to ensure normal
communication with each bound smart
device.
Installation Notes Basic Parameters
Product color: white
Working temperature: -5°C ~ +60°C
Working humidity: 5%~95% (no icing,
condensation)
Input voltage: 100V~240V AC/50~60HZ
Wireless connection: LTE,Zigbee,BLE
Wi-Fi working mode:
AP/STA mode switching
Network interface: 1 WLAN, 1 LAN