Product Description

Product Description
The zigbee gateway is a control center for smart home devices. It
communicates with the cloud and mobile phones through Wi-Fi. After users
add Zigbee devices to the gateway, they can use App to view and remote
control these devices. In addition, it can achieve many intelligent
applications, such as third-party control, group control, scene linkage and so
on.
55x55mm
220mm
55mm
220x55mm
图纸发布类别
正式归档图纸
Zigbee Gateway
Product instruction manual
成品尺寸
单位：mm
公差：
展开图尺寸：
±1mm
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body
CE
Products with the CE marking comply with the Radio Equipment Directive
(2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU), the
Low Voltage Directive (2014/35/EU) – issued by the Commission of the
European.
Compliance with these directives implies conformity to the following European
Standards：
EN300328 V2.1.1
EN301489-1/-17 V2.1.1
EN62368-1:2014+A11:2017
EN55032:2015+AC:2016(ClassB);
EN55035:2017
EN62311:2008
CE Notice
ZIGBEE无线网关
接合方式
印刷色
材质
加工工艺
105g铜版纸
风琴四折页，正反印刷
单黑
/
-
20211124
Power Outlet
Red Indicator Light (Wi-Fi)
Blue Indicator Light
(Zigbee)
Switch/ Reset Button
Indicator Light Description
Product Status
Connected
Waiting for the Connection
Wi-Fi information has been con-
figured, but cannot be connected
Allows sub-devices to access
the network
Nonactivated
Activated
Indicator Light Status
The indicator light is
constant on.
The indicator light
flashes rapidly.
The indicator light
is off.
The indicator light is
constant on.
Red Indicator Light
（Wi-Fi）
Blue Indicator Light
(Zigbee)
Indicator Light
The indicator light
flashes rapidly.
The indicator light
is off.
Installation and Distribution Network
1. Please use the 5V 1A adapter and power cord in the box to power on the
gateway.
2. After the power is turned on, wait for the red indicator light of the gateway to
change from steady on to flash rapidly, then you can connect it to the Larkkey
App.
3. Before adding a gateway, ensure that the mobile phone is connected to a
2.4GHz Wi-Fi network.
4. Scan the QR code or search for "Larkkey" in the App store to download
and install the Larkkey App.
Open the Larkkey App and click "+" in the upper right corner of the
home page to automatically discover the wireless gateway(Zigbee) to be added
Click "Add" and add devices as prompted by App.
Scan the QR code to download the Larkkey App
*App is subject to the actual release version
Tips:
（1）If the connection fails, you can press and hold the gateway reset button for 5 seconds
until the blue light turns on. Then, you can add it again after the red light flashes.
（2）For smooth connection, keep the mobile phone as close to the gateway as possible
and ensure that the mobile phone and the gateway are on the same Wi-Fi network.
（3）If the gateway is not automatically discovered, you can select the gateway control ->
wireless gateway(Zigbee) on the "Manually add" page and add the gateway as
prompted.
Use Gateway
Product Specifications
After the gateway is successfully added, please refer to the manual of the
smart device that can be connected to the Larkkey App to add the
corresponding sub-device. The added sub-devices can be viewed on the
gateway device page, and the automation and Tap-to-Run can be configured
in the "smart" page in the Larkkey App, which can realize rich automation
control.
Item Number
Power Input
Working Temperature
Working Humidity
Product Size
Product Net Weight
Wireless Protocol
-10℃～+50℃
10%-90%RH（No Condensation）
67.5mm*67.5mm*15.9mm
33g
2.4GHz Wi-Fi，Zigbee3.0
5V 1A
QQGWZW-01