Thermographic Cube Camera Quick Start Guide
Thermographic Cube Camera English Deutsch Français Español Português Italiano Čeština Slovenčina Polski Magyar Română Nederlands Dansk Norsk Suomi Svenska Русский Türkçe 日本語 한국인 繁體中文
A 1
B B.1 B.
B.
B.
English 1. Introduction Thermographic Cube Camera Series is able to measure object’s temperature at a high accuracy in real time. For the model with 433 MHz data transmission function, it is capable of wireless data transmission among different transducers and gateways. It is often applied to electric system, industrial automation, etc. for fire prevention. The pre-alarm and network system helps you discover unexpected events immediately and protects your property effectively. 2.
3. Install Camera (Page 2 – B) Before installation, make sure that the installation surface is strong enough to withstand four times the weight of the device and the accessory. Check the specification of the products for the installation environment. Select a desired installation method from B.1 to B.4. Installation Method and Steps Method Steps 1. Attach the device to a ferromagnetic surface. B.1 1. Paste the drill template to the installation surface. B.2 2.
Trademarks Acknowledgement and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.
Regulatory Information FCC Information Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s).
yourself. Input voltage should meet the Limited Power Source (12 VDC) according to the IEC62368 standard. Please refer to technical specifications for detailed information. ● Make sure the plug is properly connected to the power socket. ● The socket-outlet shall be installed near the equipment and shall be easily accessible. ● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.
caused by unauthorized repair or maintenance. ● A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details. ● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary. ● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Deutsch Français Español Português Italiano Čeština Slovenčina Polski Magyar Română Nederlands Dansk 1.
1. Suomi 1 Svenska 1. Русский 1. Türkçe 日本語 1. 한국인 1.
UDB