Baby 4T&1M ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Please consult this checklist for all parts.
Description Temperature and humidity sensor Night light Speaker Status light Power ON/OFF Night light ON/OFF Call & Pair Microphone Reset SD card slot Type-C port Status light of charging Type-C port DC 5V/1A SD card slot Support local SD Card storage (Max.
Description Antenna ON/OFF button SD card slot Speaker Reset Type-C port Screen holder Type-C port Status light of charging DC 5V/1A Orange light: Charging Status light of using Yellow light: The monitor is on Microphone Capture sound for your video Antenna Adjust the angle to get better signals Green light: Fully charged No light: The monitor is off ON/OFF button Long press 5 seconds to turn on and turn off the monitor Switch cameras (dual screen); Zoom in/out Zoom the image in 1X, 2X or 4X (si
Installation Method 1: Clamp the camera to the edge of the bed and twist the body to find an ideal viewing angle. ① 1. Press part ① and clamp the camera to the edge of the bed. ② 2. Twist part ② to adjust viewing angle. Method 2: Use the included mounting bracket to fix the camera to a clean surface. 1. Install the screws to the wall according to the position of the drill template. Do not tighten the screws to the end, as you need to leave a gap for hanging the camera. 2.
Connection Connect the camera to the App The camera can be connected both to the monitor and the App. Generally, it is connected to the monitor by default. Follow the steps below to connect the camera to the App: 1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't support 5 GHz Wi-Fi. 2. Download the corresponding App on your phone. Register a new account to log in or log in directly. 3. Reset the camera until the status light is red in fast blinking.
Connection Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available 2.4GHz 5GHz Pairing of camera and monitor Power on the camera and the monitor, and they will automatically connect. If the connection fails, please follow the steps below to pair.
Usage Note: * For different products, you may add 1 or 2 cameras. If you have added 2 cameras, the monitor screen will display 2 live views at the same time. * If you want to set parameters or enable functions of one of the cameras, you need to select the camera first. Camera selection method (2 cameras) On home page, press button to switch camera between Cam1 and Cam2 if you have added two cameras.
Usage Photo & video Take a photo: You can take a photo when you want to capture an interesting scene of baby. Press Menu button on monitor, select and press OK to take a photo. Record a video: You can record a video when you want to capture a meaningful time of baby. Press Menu button on the monitor screen, select and press OK to record. View the taken photos and recorded videos: 1. Press Menu button on the monitor screen, select and press OK to enter the interface. 2.
Usage Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the monitor screen, and select > Feeding Reminder. 2. Press UP and DOWN direction buttons to select between 10 time options, and press OK to start time setting. 3.
Usage Temperature and humidity detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the monitor screen, and select > Temperature and humidity. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to startsetting. 3.
Usage General setting Set up brightness: 1. Press Menu button on the monitor screen, select enter the interface. and press OK to 2. Press UP and DOWN direction buttons to adjustbrightness. Set up time: 1. Press Menu button on the monitor screen, and select > Time setting. 2. Press direction buttons to change date, time and time displaying mode. Set up language: 1. Press Menu button on the monitor screen, and select >Language. 2. Select the language you need.
FAQ Q: The monitor cannot be previewed properly? A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly. Q: Cannot find the pairing button? A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the monitor. (To enter the pairing interface of the monitor, press Menu button on the monitor screen, and select > Camera Management.
Functions Video flip Flip your video stream up or down for maximum flexibility. Motion detection The camera can detect movement, and then the camera will send you push notifications and app alerts. Crying detection The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts. Temperature & humidity detection The camera can detect the temperature and humidity of the environment, and the camera will send you push notifications and app alerts.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.