IP CAMERA MODEL: BELL 7S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Bell 7S Pin Double-sided tape I/M USB cable Bx2 Ax2 Dx1 Screws(3 kinds) Battery Power adapter(Optional) 1 N/C Plate
Lens Speaker PIR Doorbell button & Status light SD card slot Charging indicator Microphone Micro USB Reset Description Power Port DC 5V Doorbell button Press the button to activate the doorbell Status light Red light solids on: the camera network is abnormal Red light blinking: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly Microphone Captures sound for your video SD card slot Supports local SD Card storage (Max.
Battery Installation tape or tape 2.Nail expansion screws 3.Fix the mounting bracket with screws or tape(No need screws when install tape) 5.Tighten the screw Installation Be careful with the power! 2.Nail expansion screws 3.Tighten the wire with a screwdriver tape or tape 3.Fix the mounting bracket with screws or tape(No need screws when install tape) 5.Install the doorbell into the bracket 3 6.
Connect Download Smart Life is available for both iOS and Android OS. Search the name 'Smart LIfe in App Store or Google Play, or scan the QR-Code to download the App. ·Support IOS Android Download App(IOS&android) Add device Log in the Smart Life, select "Add Device", and add the smart doorbell to the APP according to the screen tips(Make the smart doorbell close to the router when configuring).
FAQ Q: The camera cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, if not, it is better to reset the camera and add it again. Q: Why is it still in the list of devices after reseting? A: The reseted camera only resets the network configuration of the camera, but cannot change the configuration in the App, remove the camera in your account,need to add again.
Functions 功能介绍 Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. Full-duplex audio You can see and hear the vistor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm You can set a low-battery alarm threshold in your phone App. The threshold is set to a minimum of 10% and a maximum of 50%.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning: To ensure normal use, please keep a detection distance of at least 20cm. NOTE： This device complies with part 15 of the FCC Rules.
