Quick Start Guide
Security Camera
Quick Start Guide
Foreword
Package Contents
1
Overview
2
Important Safeguards and Warnings
General
This manual introduces the functions, installation and operations of the
camera.
Electrical Safety
Environment
Operation and Daily Maintenance
Safety Instructions
The following categorized signal words with dened meaning might
appear in the manual.
About the Manual
●
●
●
●
V1.0.0
T2.00241474
Indicates a medium or low potential hazard
which, if not avoided, could result in slight or
moderate injury.
Indicates a potential risk which, if not avoided,
could result in property damage, data loss, lower
performance, or unpredictable result.
Provides additional information as the emphasis
and supplement to the text.
Signal Words Meaning
The manual is for reference only. If there is inconsistency between
the manual and the actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not
comply with the manual.
The manual would be updated according to the latest laws and
regulations of related jurisdictions. For detailed information, refer to
the paper manual, CD-ROM, QR code or our ocial website. If there
is inconsistency between paper manual and the electronic version,
the electronic version shall prevail.
Upgrade the reader software or try other mainstream reader
software if the manual (in PDF format) cannot be opened.
●
●
●
●
It is recommended to use the device together with lightning arrester
to improve lightning protection eect.
It is recommended to ground the device to enhance reliability.
Do not touch the image sensor directly. Use a dry cloth dampened
with alcohol and gently wipe away any dust on the lens.
You can clean the device body with soft dry cloth, and for stubborn
stains, use the cloth with mild detergent. To avoid possible damage
on device body coating which could cause performance decrease,
do not use volatile solvent such as alcohol, benzene, diluent and so
on to clean the device body, nor can strong, abrasive detergent be
used.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Strengthen the protection of network, device data and personal
information by adopting measures which include but not limited to
using strong password, changing password regularly, updating
rmware to the latest version, and isolating computer network. For
some device with old rmware versions, the ONVIF password will not
be modied automatically along with the modication of the system
password, and you need to upgrade the rmware or manually
update the ONVIF password.
Use standard components or accessories provided by manufacturer
and make sure that the device is installed and maintained by
professional engineers.
The surface of the image sensor should not be exposed to laser
beam radiation.
Do not provide two or more power supply sources for the device
unless otherwise specied. A failure to follow this instruction might
cause damage to the device.
01
0504
02
06
03
07
●
●
●
●
●
●
●
●
●
●
All the designs and software are subject to change without prior
written notice. The product updates might cause some dierences
between the actual product and the manual. Please contact the
customer service for the latest program and supplementary
documentation.
There still might be deviation in technical data, functions and
operations description, or errors in print. If there is any doubt or
dispute, we reserve the right of nal explanation.
All trademarks, registered trademarks and the company names in
the manual are the properties of their respective owners.
Please visit our website, contact the supplier or customer service if
there is any problem occurring when using the device.
If there is any uncertainty or controversy, we reserve the right of nal
explanation.
●
●
●
●
●
●
●
●
●
●
●
Do not aim the device at strong light to focus, such as lamp light
and sun light; otherwise it might cause over brightness or light
marks, which are not the device malfunction, and aect the
longevity of Complementary Metal-Oxide Semiconductor (CMOS).
Do not place the device in a damp, dusty, extremely hot or cold
environment, and avoid places with strong electromagnetic
radiation or unstable lighting.
Keep the device away from any liquid to avoid damage to the
internal components.
Keep the indoor device away from rain or damp to avoid re or
lightning.
Install the device in a well-ventilated place and do not block the
ventilation of the device.
Transport, use and store the device under the allowed humidity and
temperature.
Heavy stress, violent vibration or water splash are not allowed
during transportation, storage and installation.
Use the factory default package or material with equal quality to
pack the device when transporting.
Install the device in the location where only the professional sta
with relevant knowledge of safety guards and warnings can access.
Do not touch the heat dissipation component of the device to avoid
scald.
Carefully follow the instructions in the manual when performing any
disassembly operation about the device; otherwise, it might cause
water leakage or poor image quality due to unprofessional
disassembly. Please contact after-sale service for desiccant
replacement if there is condensed fog on the lens after unpacking or
when the desiccant turns green. (Not all models are included with
the desiccant).
All installation and operation shall conform to your local electrical
safety codes.
The power source shall conform to the Safety Extra Low Voltage
(SELV), and supply power with rated voltage which meets limited
power source requirement according to IEC60950-1. Note that the
power supply requirement is subject to the device label.
Make sure that the power supply is correct before operating the
device.
A readily accessible disconnecting device shall be incorporated in
the building installation wiring.
Prevent the power cable from being trampled or pressed, especially
the plug, power socket and the junction extruded from the device.
Unpack the box and check if all the components are included
before installation.
Contact your local retailer if anything is broken in your package.
Camera
×1
Screw and Anchor
Pack ×1
Power Cable
×1
Mounting Template
×1
Mounting Plate
×1
WARNING
CAUTION
CAUTION
NOTE
Battery Safety Precautions
Only use Imou batteries. Contact us if you are unsure whether a
replacement battery is compatible.
Do not expose batteries to re, heat, or water.
Do not drop, crush, disassemble or otherwise damage batteries.
Keep away from small children and pets.
Do not use batteries at temperatures above 60°C (140°F) or place
batteries next to areas which may become hot.
Do not charge at temperatures below 0°C (32°F) or above 45°C
(113°F).
Keep batteries isolated from ammable or explosive materials.
Batteries not in use should be stored in a safe, cool, dry place,
individually in a plastic holder or container, away from all metal
objects to avoid short circuit.
Make sure the battery contacts are always aligned, and the battery
compartment is empty and free of any moisture or loose debris
before inserting the battery. Always keep the battery compartment
dry even after installation.
Always follow local waste and recycling laws and guidelines to
dispose of used batteries.
Do not use a battery if its case appears damaged, swollen, or
compromised. Examples include, but are not limited to, leaking,
odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
All batteries can explode, catch re, and cause burns if it has been cut,
crushed, disassembled, punctured, incinerated, short-circuited, or
exposed to water, re or high temperatures. Safely and responsibly
install, use, and dispose of batteries.
WARNING
Power Adapter
×1
Quick Start Guide
×1
i
i
Front View
Microphone
Lens
LED Indicator
Micro SD Card Slot
Reset Button
How to reset the camera
i
Press and hold the reset button for 10 s.