Video Doorbell Quick Start Guide https://en.imoulife.com T2.00251077 V1.0.
Welcome Thank you for choosing IMOU. We are devoted to providing you easy smart home products. If you have problems using the product, please contact our service team at service.global@imoulife.com before returning your product. Doorbell Safety Precautions Read this guide carefully and keep it for future reference. Follow all instructions for safe use and handling of the product. Do not disassemble the doorbell. Use the doorbell at temperatures from -20°C (-4°F) to +50°C (+122°F).
All batteries can explode, catch fire, and cause burns if it has been cut, crushed, disassembled, punctured, incinerated, short-circuited, or exposed to water, fire or high temperatures. Safely and responsibly install, use, and dispose of batteries. Battery Safety Precautions Only use Imou batteries. Contact us if you are unsure whether a replacement battery is compatible. Do not expose batteries to fire, heat, or water. Do not drop, crush, disassemble or otherwise damage batteries.
Package Contents Doorbell ×1 Wire Nuts ×3 Mounting Bracket ×1 Mounting Screws ×4 (for moungting bracket) Angled Bracket ×1 (15° horizontally) Angled Bracket ×1 (5° vertically) Extension Wires ×2 Wall Anchors ×4 Mounting Screws ×4 (for angled bracket) Terminal Screws ×4 Tools Required Pin ×1 15/64" Drill Bit ×1 Charging Cable ×1 Quick Start Guide ×1 1 Philips-head Screwdriver Drill
Overview Front View Back View Motion Sensor Lens LED Status Micro USB Port Solid green Reset Button Flashing green Solid red Power Port Microphone Light Sensor LED Indicator Call Button Bottom View Spotlight/Night Light Speaker 2 Flashing red Sold blue Flashing blue Spinning blue Flashing green and red Off Device Status Operating correctly Setup successful Ready to set up the device Booting/Restarting Resetting to factory default Network disconnected Talking Motion/Human detected Calling Updating
Set Up the Device Scan the QR code below, search for "Imou Life" in the app store, or navigate to Support > Download Center in our official website to download and install the app. 1 Imou Life i If you already use the app, make sure that you are using the latest version. To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the device and the router.
The app will guide you through the setup process. 2 + Add Device Setup Setup SSID XXXXXX Password Rear Side Next Done Power the Doorbell Option 1 Battery Powered The battery can run on its own rechargeable battery power. See from page 5 for installation without wiring. Option 2 Wire Powered If you have existing doorbell wiring, your battery can get continuous power. Supply the doorbell with 8 V-24 V AC/DC power.
Install the Video Doorbell (Battery Powered) Step 1 Mark Mounting Holes Place the mounting bracket on the mounting surface and then use it to mark the screw holes. Be sure to follow the "UP" direction. i How to use angled bracket Attach one of the angled mounting wedges to the mounting bracket if you want to adjust the angle of your doorbell for a better view. Mark the screw position according to the oval hole.
Step 2 (Optional) Install Wall Anchors If installing on stucco, brick, or concrete, use the provided drill bit to drill holes where marked, and then insert the included wall anchors. For wood, drywall or soft surface, skip this step. Step 3 Secure the Bracket Secure the bracket to the mounting surface with a Philips-head screwdriver and supplied mounting screws. Be sure to follow the "UP" direction on the mounting bracket.
Step 4 Mount the Doorbell Place the doorbell on the top tab of the mounting bracket, and then push it into the bottom tab, until you hear it click into place. i How to detach the doorbell from the mounting bracket Insert the supplied pin into the hole at the bottom of the bracket and push it slightly harder until the doorbell is released. i How to recharge the doorbell When you receive the low battery alert from the app, please recharge your doorbell.
Install the Video Doorbell (Wire Powered) Before getting started, turn off the power at the breaker, and make sure that no power is going to your doorbell system. Step 1 Mark Mounting Holes Place the mounting bracket to fit your existing doorbell wiring and then use it to mark the screw holes. Be sure to follow the "UP" direction. i How to use angled bracket Attach one of the angled mounting wedges to the mounting bracket if you want to adjust the angle of your doorbell for a better view.
Step 2 (Optional) Install Wall Anchors If installing on stucco, brick, or concrete, use the provided drill bit to drill holes where marked, and then insert the included wall anchors. For wood, drywall or soft surface, skip this step. Step 3 Secure the Bracket Lead the doorbell wires through the hole on the bracket, and then secure the bracket to the mounting surface with a Philips-head screwdriver and supplied mounting screws. Be sure to follow the "UP" direction on the mounting bracket.
Step 4 Connect Wires 1. Partially tighten the terminal screws into the power port. 2. Loop your existing wires underneath the screws. Either wire can connect to either screw. 3. Tighten the screws to secure the power wires. Step 5 (Optional) Apply Extension Wires 1. If your existing wires are too short, thread the terminal screws through the provided extension wires. 2. Align the ends of your existing wire and the extension wire. 3.
Step 6 Mount the Doorbell Place the doorbell on the top tab of the mounting bracket, and then push it into the bottom tab, until you hear it click into place. Your doorbell is now ready to use. Restore the power at the breaker. i How to detach the doorbell from the mounting bracket Insert the supplied pin into the hole at the bottom of the bracket and push it slightly harder until the doorbell is released.
(Optional) Install the Chime Kit i The chime kit is used to regulate power to your existing chime so that your doorbell will function properly. Step 1 Remove the cover of your existing chime box, and then find terminals labeled as "FRONT" and "TRANS". The chime might look different depending on if you have a mechanical or electronic chime. Step 2 Loosen "FRONT" and "TRANS" terminal screws. If there are no markings, simply loosen the two terminals that wires are connected to.
Step 3 Connect the wire harness to the chime kit. Step 4 Connect either one of wires from the chime kit to the "FRONT" terminal and the other one to the "TRANS", and then tighten the screws. Be sure the existing wires are attached. Step 5 It is recommended that you attach the chime kit to the inside of your chime with adhesive. Make sure that the kit and its connected wires will not interfere with the chime's operation. Step 6 Replace the chime cover.
Troubleshooting Q: Failed to set up the device? Ensure your smart phone and the device are within range of your Wi-Fi router (recommended to be no more than 5 m (16 ft). If the location where the video doorbell is installed has a weak signal, consider adding a Wi-Fi extender between your router and the doorbell. Ensure the LED on the device is flashing green before setup.
Q: How to update the firmware? You can update the firmware through the "Imou Life" app in Devices Settings > Firmware. It shows a red dot when an update is available. The doorbell will restart automatically when it finishes update. Q: The device is offline? If the LED is flashing red, check whether the router can connect to the Internet. If the network is connected, restart the device. If the device is still offline, reset it.
Q: The doorbell’s chime is not working? Make sure the chime is correctly linked to the doorbell in the app. Ensure the doorbell is wired correctly. Check if the doorbell needs recharging if it is battery-powered. Q: Can I pair a mechanical or electronic chime to the doorbell? Yes. The chime needs to be used with the chime kit, which is not supplied. For detailed installation of the chime kit, see from page 12.
Legal and Regulatory I nformation 1 .2.51 .32. 1 52 1 0-001 V2.0.0 Legal Considerations Video s u rve, l lance can be repulated by l aws that vary from cou ntry to ccuntry Check the l aws ,n you r loca region before us,ng th,s prod u ct for s u rve, l lance p u rposes Disclaimer , Restrictions of Haza rdous Substances (Ro HS) Directi ve 2011 /65/EU and its amending Directive (EU) 201 5/863 A copy of the original declaration of oonfonnity may be obtained from Dah u a Technology.
