User's Manual

N.O N.C
N.O N.C 2K2 2K2
8K2 8K2
LAN
N.O
N.C
OUTPUT
CONTROL
N.C
N.O
2K2
EOL
2K2
EOL
Single EOL
RS-485
SOUNDER
Double EOL
Triple EOL
2K2
EOL
2K2
EOL
N.C
2K2
2K2
N.O
8
Double
Zone
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
E N G L I S H
1 2
4
Specication
Appearance
Note: Power down the control panel before wiring accessories and peripherals.
1-3. Mount the back case.
4. Fix the telephone module (sold separately) and wiring.
5. Fix the GPRS/4G module (sold separately).
6. Wire power supply and network.
1
Set Up
User Manual
Installation and Wiring
AX HYBRID PRO
Quick Start Guide
2
3
4
UD24855B-B
1. Telephone Module Slot
4. Reset Button
7. GPRS/4G Slot 8. Lid Opened Switch 9. LAN
5. WiFi Mode Switch* 6. SD Card Slot*
2. Power Supply 3. Battery Terminal
Power Supply Wiring
Network Wiring
Peripherals Wiring:
Telephone Module Wiring
2
3
1
a
d
b
e
c
f
2
4
7. Close the case of the control panel.
Set up via Web Client
For more activation methods, refer to the User Manual.
Default IP Address:
AP connection (Hotspot mode):192.168.8.1
Network cable connection: 192.0.0.64
1. Enter the device IP address in the web browser.
2. Create a password for admin account to activate the device.
Reset:
After the device is started, hold the reset button for 10 seconds to reset the device.
*Note: WIFI mode and SD card slot are equipped according to the model.
Indicator
Mobile
Act
PSTN
Link
System
Power
EN 50131-3:2009, EN 50131-10:2014
EN 50136-2:2013, EN 50136-1:2012+A1:2018
EN 50131-6:2017, EN 50131-1:2006+A1:2009+A2:2017+A3:2020
EN 50130-4:2011+A1:2014, EN 50130-5:2011
Security Grade 2, Environment Class II, SP4
1
2
3
4
5
7
8
9
6
GPRS
Telephone Module
OR
4G
1
3
4
5
6
2
HOTSPOT WLAN
HOTSPOT WLAN
4
1
2
a
b
c
d
e
3
8
BACK
f
Model 48 Series
64 Series
Tag 48 64
Keyfob 48 64
Keypad 4 8
Zones
48 (8 on-board zones, max 4
wired PIRCAM)
64 (8 on-board zones, max 8 wired
PIRCAM)
Area 16 32
Operator: 46 Operator: 62
SMS notification
Onboard video clips 2 4
Programming tools
Firmware upgrade
Alarm output
48 (Including 2 on-board
relay outputs)
64 (Including 2 on-board relay
outputs)
Power Output
3/4G on board
GPRS on board
Wi-Fi / 802.11b/g/n (2.4GHz)
Bus
Sounder output
Netowrk interface
Power interface
Operation
temperature
Operation humidity
Shell material
Color
Dimension(W×H×D)
Weight 996.5 g 997 g
User
Installer: 1
Administrator: 1
Supports (with GPRS/3G/4G module)
ARC protocol
ISAPI: Supports iVMS-4200 client software and web client
Cloud P2P: Supports cloud P2P privacy protocol
DC-09: ARC accessible (ADM-CID/SIA-DCS)
CSV-IP：Supports CSV-IP
ISUP：Supports ISUP 5.0
Web/iVMS-4200/Hik-ProConnect/Keypad
Web/iVMS-4200/Hik-ProConnect
12 V, 1.5 A
Optional
Optional
100 to 240 VAC
(On-board power transformer)
1 Speed-X bus
1 wired on-board sounder output
Tamper-Proof
1 switch to detect removal from mounting
1 switch to detect front cover open
1 RJ45 10M/100M Ethernet interface
-10°C to 40°C
10% to 90%
Plastic
White
261 mm × 199 mm × 86.4 mm
PGM is a programable trigger output. PGM1 and PGM2 are
200mA(max.) trigger outputs with +/- trigger. They can be set at
either normally open or normally closed (optional, function
varies according to the panel model). If the current draw on
PGM1/PGM2 is to exceed the current output, we recommend
using a relay as shown in above Figure.
Note: PGM is a programable trigger output. PGM1 and PGM2 are 200mA(max.)
trigger outputs with +/- trigger. They can be set at either normally open or normally
closed (optional, function varies according to the panel model). If the current draw
on PGM1/PGM2 is to exceed the current output, we recommend using a relay as
shown in above Figure.
LED TAMPER ALARM FAULT
EOL EOL EOL
Z2 COM Z1
RT RA RF
Resistors for NO/NC/Single EOL/Double EOL: 1K, 2.2K, 4.7K, 5.6K, 6.8K, 8.2K
Triple EOL Wiring Method: Resistor of Tamper (RT): 1kΩ
Resistor of Alarm (RA): 1kΩ
Resistor of Fault/Masking (RF): 2.2kΩ
Tamper
Open
Open
Open
Open
Open 4.2KΩ
3.2KΩ
1KΩ
2KΩ
End resistance of the entire circuit is 0Ω.
Close
Close
Close
Close
Close
Close
Close Close
Close
Close
Normal
Alarm
Fault
Masking
Short Circuit
Circuit Resistance
Detector Status
RT
RA RF
Tamper Tamper
Tamper Tamper