Dashcam User Manual Download App (iOS User) Download App (Android User) UD07295B
A Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Regulatory Information FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
A Regulatory Information The power supply must conform to LPS. The recommended adaptor model is C10, whose manufacturer is Dongguan NB Power Electronic Limited. Use this kind of adaptor, and do not change the adaptor randomly. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s).
A Regulatory Information potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
B Packing List • Camera × 1 • Suction Cup Bracket × 1 • Cigarette Lighter ×1 • User Manual ×1 • Power Cord × 1 • The suction cup bracket with GPS module is optional. • The wireless remote control is optional.
C Camera Description • Front View • Bracket Connector • Loudspeaker • Lens • Rear View • Micro SD Card Slot • Status Indicator • MIC • Reset Button 6
D Installation Rotate clockwise to lock. Insert downwards 》 》 Route the power cord along the red line.
E Status Indicator Recording indicator • Solid red: dashcam is recording the event video. • Solid blue: dashcam is recording the continuous video. Wi-Fi indicator • Solid blue: Wi-Fi is turned on and waiting to be connected. • Blinking blue: a mobile app has connected the Wi-Fi. Taping indicator • Solid blue: taping when recording. • Unlit: recording without taping. Reset button • Press it to reboot dashcam. • To restore factory defaults, press down and hold it till the dashcam sends out the startup sound.
F Mobile Phone Connection Scan the QR code to download the HikDashcam app. < Scan QR Code For iOS User For Android User Add the dashcam in app by connecting with its Wi-Fi. 1. Run the HikDashcam app. 2. In Wi-Fi list, select the Wi-Fi name of target dashcam and enter Wi-Fi password to build connection. Dashcam Wi-Fi default parameters: • Wi-Fi name: HIKVISION-XXXX (XXXX refers to the last four characters of verification code.
G Operation Power on and Power off 1. Insert the cigarette lighter into the receptacle in automobile. 2. The dashcam powers on once the automobile starts up and powers off once the automobile flameouts. Note • After powered off, the dashcam will keep working for a period before shutdown. The period can be set in app. • For automobiles with constant electric power supply, pull the cigarette lighter out of the receptacle to power off dashcam.
H Preventions and Cautionary Tips Tips for Dashcam • Operate the dashcam in accordance with the local regulations and laws. • Save the user manual properly for future reference. • To ensure data is safe and stable, install a micro SD card bought from formal channel. It is recommended to use a high-speed micro SD card of class 10 and above. • To protect micro SD card from damage, shut down the dashcam before installing and uninstalling micro SD card.
I Trouble Shooting Trouble Solution The dashcam drops easily. • Clean the glass before installation. • Tear off the dust-proof film on suction cup before installation. • After using for a period, you can soft and clean the suction cup with hot water. Starting dashcam failed. • Ensure the automobile started normally. • If no indicator is lighting, reconnect the cigarette lighter. • Restore dashcam to factory defaults. The dashcam powers off • Ensure the power cord is well. frequently.
I Trouble Shooting Trouble Solution Connecting the dashcam • Ensure the app is well installed. • Restart the app and dashcam. via app failed. Playing video via app failed. The trouble may be relevant with the mobile phone player or system. Insert the micro SD card into your computer and play the videos. Failed to detect the micro The dashcam does not support data SD card when connecting transmission. And the power cord the dashcam and your is only for charging.