DS-1600KI Network Keyboard User Manual 0
User Manual of DS-1600KI Network Keyboard User Manual COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
User Manual of DS-1600KI Network Keyboard Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
User Manual of DS-1600KI Network Keyboard Applicable Models This manual is applicable to the models listed in the following table. Series Model Network Keyboard DS-1600KI Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
User Manual of DS-1600KI Network Keyboard Press a numeric button and MON button to select an output channel. Number represents output channel ID. Go to Keyboard > Channel > Output Channel for the ID. Press Number + CAM Keyboard mode: Press a numeric button and CAM button to select an output channel. Number represents input channel ID. Go to Keyboard > Channel > Input Channel for the ID. HikCentral/KPS mode: Press a numeric button and CAM button to select a camera.
User Manual of DS-1600KI Network Keyboard Safety Instructions Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
User Manual of DS-1600KI Network Keyboard TABLE OF CONTENTS Chapter 1 Activation ................................................................................................................... 1 1.1 Local Menu Activation .............................................................................................................. 1 1.2 SADP Activation ........................................................................................................................ 1 Chapter 2 Network ............
User Manual of DS-1600KI Network Keyboard 5.3.1 Video Wall Control ........................................................................................................ 24 5.3.2 PTZ Operation................................................................................................................ 24 Chapter 6 System ..................................................................................................................... 25 6.1 Hardware ..................................................
User Manual of DS-1600KI Network Keyboard Chapter 1 Activation You can activate network keyboard via local menu or SADP client. 1.1 Local Menu Activation Purpose For the first-time access, you need to activate the network keyboard by setting an admin password. No operation is allowed before activation. Step 1 Connect your network keyboard power supply to an electrical outlet. And turn on the network keyboard. Step 2 Set password.
User Manual of DS-1600KI Network Keyboard Select inactive device. Input and confirm password. Figure 1-1 SADP Interface Step 4 Create and input the new password in the password field, and confirm the password. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
User Manual of DS-1600KI Network Keyboard Chapter 2 Network Purpose Network parameters must be properly configured before you can add network devices and operate the network keyboard over network. Step 1 Go to System > Network. Step 2 Configure network parameters. Check DHCP to obtain IP settings automatically. Or you can manually enter IP address, subnetwork mask, and gateway. Step 3 Tap Save.
User Manual of DS-1600KI Network Keyboard Chapter 3 Keyboard Purpose Keyboard mode is mainly applied to small-sized surveillance projects. Network keyboard works as a control center and manages surveillance devices added in it. 3.1 Login Step 1 Tap Keyboard at home page. Step 2 Select user name and enter password. Step 3 Optionally, you can check Remember. Step 4 Tap Login.
User Manual of DS-1600KI Network Keyboard Figure 3-1 Add Center Device Figure 3-2 Add Network Camera 3.2.2 Add in Batch Add by SADP Search Purpose Add devices with the same user name and password in batch. Step 1 Go to Keyboard > Device. Step 2 Tap . Step 3 Check devices and tap in upper left corner. Step 4 Enter user name and password, and tap OK. Import Input Channels Purpose The information of added input channel can be generated into an excel file and exported to the USB flash drive for backup.
User Manual of DS-1600KI Network Keyboard Connect an USB flash drive to the network keyboard. Step 1 Go to Keyboard > Channel. Step 2 Export input channel template. 1) Tap to export an excel file. 2) Edit the file on your computer, like adding or deleting input channels 3) Copy the file to an USB flash drive and connect it to your network keyboard. Step 3 Tap to import input channels. 3.3 Local Live View Preview an input channel in keyboard touchscreen. You can preview channel of up to 4K resolution. 3.
User Manual of DS-1600KI Network Keyboard If you want to control PTZ without previewing speed dome image, press Num + CAM. Captured pictures and clipped videos will be saved in FTP server or USB flash drive. For detailed steps, refer to 6.2 Storage. 3.3.3 PTZ Control You can control the added speed dome, including control PTZ movement, turn on/off light, turn on/off wiper, zoom in/out, set/call preset, etc. General Operation Step 1 Preview speed dome image. For detailed steps, refer to 3.3.
User Manual of DS-1600KI Network Keyboard Set and Call Patrol Purpose Have the PTZ moving among several presets. PTZ will stay in a preset for a duration before moving on to the next preset. Step 1 Preview speed dome image. For detailed steps, refer to 3.3.1 Preview by Operating Touchscreen and 3.3.2 Preview by Operating Keyboard Shortcut. Step 2 Press SET to start setting. The SET button turns red. Step 3 Press Num + Patrol to select which patrol to set.
User Manual of DS-1600KI Network Keyboard Set and Call Pattern Purpose Pattern records the movement of the PTZ. You can call the pattern to automatically move the PTZ according to the predefined path. Step 1 Preview speed dome image. For detailed steps, refer to 3.3.1 Preview by Operating Touchscreen and 3.3.2 Preview by Operating Keyboard Shortcut. Step 2 Press SET to start setting. The SET button turns red. Step 3 Press Num + Pattern to select a pattern to set. Step 4 Rotate the joystick to control PTZ.
User Manual of DS-1600KI Network Keyboard Step 3 Select a decoding device and select its output channel. Step 4 Tap OK to finish setting. Region output channel layout should be the same with the actual video wall. Figure 3-4 Add Output 3.4.2 Video Wall Control Layout Operation Purpose Select a monitor to open, close, resize, and divide windows. Step 1 Press Num + REGION, or press Num + WALL. Step 2 Tap to select a monitor. Step 3 Operate the window as your desires.
User Manual of DS-1600KI Network Keyboard Window Operation Purpose Display an input channel or input group on a monitor. Step 1 Select a monitor to display. Three methods are provided. You are recommended to use the first one. Num + REGION: Select a monitor on a region. 1) Press Num + REGION to show monitors on the region and video wall layout. 2) Press Num + MON. Or tap to select a monitor. Num + WALL: Select a monitor on a wall. 1) Press Num + WALL. For roaming device, WALL refers to video wall.
User Manual of DS-1600KI Network Keyboard Scene Operation Purpose Switch the scene for a region or video wall. Step 1 Press Num + REGION, or press Num + WALL. Step 2 Select a monitor or window on touchscreen. Step 3 Press Num + SCENE. Or tap on the upper right corner and select a desired scene. 3.4.3 PTZ Control Purpose You can control the added speed dome, including control PTZ movement, turn on/off light, turn on/off wiper, zoom in/out, set/call preset, etc.
User Manual of DS-1600KI Network Keyboard 3.5 Playback 3.5.1 Local Playback Play videos on the touchscreen. Instant Playback Play videos in 3/5/10/15 minutes. Step 1 Start local live view. For detailed steps, refer to 3.3.1 Preview by Operating Touchscreen and 3.3.2 Preview by Operating Keyboard Shortcut. Step 2 Press to start playing the video within 5 minutes. Or tap , tap Instant, and select the playback time. Play by Time Step 1 Start local live view. For detailed steps, refer to 3.3.
User Manual of DS-1600KI Network Keyboard Button Description Button Description Outer shuttle Rotate it clockwise to speed up. clipping. Inner shuttle Reserved. Rotate it anticlockwise to slow down. Time bar Drag time bar to quickly locate on a certain time to play. 3.5.2 Video Wall Playback Play videos on video wall. You can only play videos of DS-64-T and DS-69UD decoder. Instant Playback Play videos in 3/5/10/15 minutes. Step 1 Start video wall live view.
User Manual of DS-1600KI Network Keyboard Figure 3-5 Modify Input Channel Step 3 Edit parameters. ID: The unique identification for input channel. It is valid in local and video wall live view mode. Stream: The stream to preview in local and video wall live view mode. Protocol: It is valid in video wall live view mode. Step 4 Tap OK. 3.6.2 Output Channel When adding decoders or video recorders, keyboard will add their output channels and display them in output channel list.
User Manual of DS-1600KI Network Keyboard 2) Tap of input channel to link. Or check input channels and tap . Up to 32 input channel groups can be added. One input group can link up to 64 input channels. Interval range: 1 to 65535 seconds. 3.7 User Administrator can add operator and allocate devices to operator. Operator permissions are as follows: Add, modify, and delete macro and group. Add, modify, and delete region. Operator devices allocated by administrator.
User Manual of DS-1600KI Network Keyboard Keyboard supports up to 32 users: 1 administrator and 31 operators. 3.8 Video Recorder Control video recorder (DVR/NVR/XVR) by operating video record remote panel. 3.8.1 Remote Panel Press Num + DEVICE to show video recorder remote panel. Num refers to video recorder ID. Go to Device for video recorder ID.
User Manual of DS-1600KI Network Keyboard EDIT In editing mode, tap it to delete the content before the cursor. Check/uncheck a checkbox. MENU Enter main menu interface. In second-level menu, tap it to go back to live view interface. During playback, tap it to hide control bar. F1 During playback, tap it to switch between play and reverse play. In live view mode, tap it to start instant playback. F2 Tap it to switch tab page.
User Manual of DS-1600KI Network Keyboard Figure 3-7 Remote Panel (Disable PTZ) Table 3-4 Button Description Button Description Disable PTZ Exit PTZ control mode. Numeric Button Switch to corresponding channel. PRESET Tap PRESET + Num to call the preset. AUTO Enter auto-scan mode. ZOOM+ Zoom in. FOCUS+ Increase focus. IRIS+ Increase iris. WIPER Turn on/off PTZ wiper. LIGHT Turn on/off PTZ light. AUX Reserved. ZOOM- Zoom out. FOCUS- Decrease focus. IRIS- Decrease iris.
User Manual of DS-1600KI Network Keyboard 3.8.2 Live View Video Recorder (Version before 4.0) Whatever interface the video recorder is in, tap ESC till you enter the live view mode. Video Recorder (Version: 4.0 and above) Whatever interface the video recorder is in, tap directional button to enter the live view mode. 3.8.3 PTZ Control You can control the added speed dome, including control PTZ movement, turn on/off light, turn on/off wiper, zoom in/out, set/call preset, etc.
User Manual of DS-1600KI Network Keyboard Chapter 4 HikCentral Mode 4.1 Login Step 1 Tap HikCentral at home page. Step 2 Tap IP Config at upper right corner. Step 3 Enter server IP and port, and save. IP: The server IP address of HikCentral platform. Step 4 Enter server user name and password. Step 5 Optionally, you can check Remember. Step 6 Tap Login. After several failed login attempts, you need to enter verification code. The login attempt times are decided by platform.
User Manual of DS-1600KI Network Keyboard Figure 4-1 Modify Camera ID 4.3 Video Wall Operation 4.3.1 Video Wall Control Select a monitor to open, close, resize, and divide windows. Select a video wall and switch its scene. Display a camera on video wall monitor or sub-window. Does not support region. Num + REGION operation is valid. Does not support input channel group. For detailed steps, refer to 3.4.2 Video Wall Control. 4.3.
User Manual of DS-1600KI Network Keyboard Chapter 5 KPS Mode 5.1 Login Step 1 Tap KPS at home page. Step 2 Tap IP Config at upper right corner. Step 3 Enter server IP and port, and save. IP: The server IP address of KPS platform. Step 4 Enter server user name and password. Step 5 Optionally, you can check Remember. Step 6 Tap Login. 5.2 Resource List Resource list interface appears after logged into KPS. Resource list contains control center, region, video wall, and camera.
User Manual of DS-1600KI Network Keyboard Figure 5-1 Modify Keyboard Control Code 5.3 Video Wall Operation 5.3.1 Video Wall Control Does not support Num + REGION and Num + WALL operation. You can only select monitor by pressing Num + MON. Does not support input channel group. Does not support open, close, resize, and divide a window. For detailed steps, refer to 3.4.2 Video Wall Control. 5.3.
User Manual of DS-1600KI Network Keyboard Chapter 6 System Tap System at home page to enter system interface. You can configure keyboard network, hardware, time, etc. 6.1 Hardware Transparency: Select menu transparency. Only valid in local live view. Alarm: Keyboard alarms when network disconnected or IP conflicted. 6.2 Storage 6.2.1 FTP Storage Captured pictures and clipped videos will be saved to FTP server.
User Manual of DS-1600KI Network Keyboard 6.3.1 FTP Upgrade Step 1 Configure FTP server. For detailed steps, refer to 6.2 Storage. Step 2 Turn on FTP server and input upgrade file into FTP root folder. Step 3 Go to System > Maintenance and select FTP upgrade. Step 4 Enter admin password to confirm. 6.3.2 USB Flash Drive Upgrade Step 1 Save upgrade file in USB flash drive. Step 2 Connect USB flash drive to keyboard USB interface. Step 3 Go to System > Maintenance and select USB Flash Drive upgrade.
User Manual of DS-1600KI Network Keyboard 6.6 Lock Keyboard Step 1 Hold LOCK for 3 seconds to exit to home page and lock keyboard. Step 2 Press LOCK again to unlock keyboard.
UD13888B 0
