User's Manual

ManualsBrandsHangzhou H3C Technologies ManualsElectronicsWireless Card

H3C MSR 20-1X Series Routers Quick Start

(V1.00)

1 Product Overview

H3C MSR 20-1X series routers, developed by Hangzhou H3C Technologies Co., Ltd.,

are multifunctional access routers which are oriented to small and medium business

(SMB), enterprise branches, and home offices, and are designed to serve

high-quality orderwire and commercial networks.

MSR 20-1X series routers include the following models.

Table 1

MSR 20-1X series routers

Model Description

H3C MSR 20-10

Four 10/100 Mbps L2 Ethernet ports (LAN)

One 10/100 Mbps Ethernet port (WAN)

One USB port

One console/AUX port

H3C MSR 20-11

Four 10/100 Mbps L2 Ethernet ports (LAN)

One 10/100 Mbps Ethernet port (WAN)

One USB port

One Console/AUX port

One SA port

H3C MSR 20-12

Four 10/100 Mbps L2 Ethernet ports (LAN)

One 10/100 Mbps Ethernet port (WAN)

One USB port

One Console/AUX port

One E1/T1 port

Summary of content (5 pages)

PAGE 1
H3C MSR 20-1X Series Routers Quick Start (V1.00) 1 Product Overview H3C MSR 20-1X series routers, developed by Hangzhou H3C Technologies Co., Ltd., are multifunctional access routers which are oriented to small and medium business (SMB), enterprise branches, and home offices, and are designed to serve high-quality orderwire and commercial networks. MSR 20-1X series routers include the following models.
PAGE 2
Model Description H3C MSR 20-13 Four 10/100 Mbps L2 Ethernet ports (LAN) One 10/100 Mbps Ethernet port (WAN) One USB port One console/AUX port One G.
PAGE 3
Related Documentation Table 2 lists the manuals related to MSR 20-1X series routers. You can get them from the delivered CDs or the website at http//:www.h3c.com. Table 2 Related manuals Manual H3C MSR 20_30_50 Routers User Manual Description Guides users to operate all low-end and mid-range series routers, explains in detail the operation commands involved, and presents an index to all these operation commands.
PAGE 4
OEM Installation Guide: This device is intended only form OEM integrators under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
PAGE 5
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver.