Package Contents Camera (x1) Screw Kit (x1) Base (x1) Drill Template (x1) Power Adapter (x1) Power Cable (x1) Quick Start Guide (x1) The camera appearance is subject to the actual model you have purchased.
Basics Micro SD Card Slot Reset Button LED Indicator MIC Name LED Indicator Description Solid Red: Camera is starting up. Slow-flashing Red: Wi-Fi connection has failed. Fast-flashing Red: Device exception (e.g. MicroSD card error). Solid Blue: Video is being viewed or played back in EZVIZ App. Slow-flashing Blue: Camera is running properly. Fast-flashing Blue: Camera is ready for the Wi-Fi connection. Micro SD Card (sold separately) Initialize the card in the EZVIZ app before using it.
Speaker Ethernet Port Power Port Setup 1 Power-on Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below. Power Outlet Power Cable The LED turning fast-flashing blue indicates that the camera is powered on and ready for Wi-Fi configuration.
2 Camera Setup 1. Create a user account --Connect your mobile phone to Wi-Fi using your 2.4GHz network. --Search for "EZVIZ" in the App Store or Google Play(TM). --Download and install the EZVIZ app. --Launch the app. --Create and register an EZVIZ user account by following the start-up wizard. The camera works with 2.4GHz Wi-Fi signals. If you have a dual-band router with separate 2.4GHz and 5GHz networks, make sure your phone is connected to the 2.4GHz one. 2.
Installation (Optional) 1 Install the Micro SD Card (Optional) 1. Rotate the sphere upwards until you see the card slot. 2. Insert the Micro SD card (sold separately) into the card slot as shown in the figure below. 1 2 This Side Up After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it. 3. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status. 4.
2 Install the Base The camera can be placed horizontally or mounted on the ceiling. Here we take ceiling mounting as an example. • Make sure the ceiling is strong enough to withstand three times the weight of the camera. • Avoid positioning the camera in an area that gets a lot of light shining directly into the camera lens. --Place the drill template onto the surface you have chosen to mount the camera. --(For cement wall/ceiling only) Drill screw holes according to the template, and insert three anchors.
3 Install the Camera Mount the camera to the base, and turn it clockwise until it is fixed. 1 2 After installing the camera, please go to the EZVIZ app to flip the camera image. For detailed information, please visit www.ezvizlife.com.