Operations Step 1 Installing the Battery 1 Slide the rear cover off from T2 and then open the battery cover, as shown below. 2 Pull out the insulation sheet from the battery slot. Insulation Sheet 3 Replace the battery cover and the rear cover, and then finish the battery installation. Step 2 Adding T2 to Internet Alarm Hub T2 should be used cooperating with an Internet Alarm Hub (such as A1, should be purchased separately). • Option 1 (Recommended) Adding by EZVIZ App 1.
2. Adding T2 - Log in the EZVIZ app. - Find your Internet Alarm Hub and enter the Linked Device list. - Tap the “+” of the Linked Device and scan the QR code of T2, which is on the battery cover of T2, to link T2 to the Internet Alarm Hub. • Option 2 Adding by Operating Internet Alarm Hub 1. Turn on the “Adding Detectors Mode” of your Internet Alarm Hub by pressing the Setting button. Refer to Quick Start Guide of your Internet Alarm Hub for details. 2.
Step 3 Installing T2 • The installation place should with no strong magnetic field nearby. • To ensure the detection effect, the distance of two parts of T2 should be as small as possible (within 5mm) when you install T2. 1. Selecting the Installation Position You can install the detector on the door or window, as shown below.
2. Installing T2 Make sure the door or window is closed. Paste the foam sticker to the bottom of the two parts of T2 and then fix them on the selected position, as shown below. Door/Window Frame Door/Window You are recommended to install the main body of T2 on the immovable place (such as door frame) in case it falls down when you open and close the door or window. Maintenance When the battery runs out, a low battery warning will be sent to the EZVIZ account to remind you to change the battery.
Appendix Box Content T2-A x1 Foam Sticker x2 Quick Start Guide x1 Basics Main Body Indicator Magnet Body Flicker Twice: Alarm Triggered Flicker Five Times: Low Battery Functions Based on the magnetism, when the distance between main body and the magnet body exceeds 3 cm, T2 sends an alarm signal to the EZVIZ app.
Specifications Battery Voltage 3V Battery Life 2 Years Working Current Static: 20μA Max.: 40mA Low Battery Voltage Alarm 2.8V±0.
Operaciones Paso 1 Instalación de la batería 1 Deslice la tapa trasera del detector T2 y abra la tapa de la batería como se muestra a continuación. 2 Retire la hoja de aislamiento de la ranura de la batería. Hoja de aislamiento 3 Vuelva a colocar la tapa de la batería y la tapa trasera y finalice la instalación de la batería.
2. Agregar el detector T2 -- Inicie sesión en la app EZVIZ. -- Busque su concentrador de alarmas por Internet e introduzca la lista de dispositivos vinculados. -- Toque el símbolo “+” del dispositivo vinculado y escanee el código QR del detector T2, que está en la tapa de la batería y vincúlelo con el concentrador de alarmas por Internet. • Opción 2 Añadir usando el concentrador de alarmas por Internet 1.
Paso 3 Instalación del detector T2 • El lugar de instalación no debe estar cerca de campos magnéticos fuertes. • Para garantizar la detección, la distancia de los dos componentes del detector T2 debe ser lo menor posible (a 5 mm) cuando instale el detector T2. 1. Selección del lugar de instalación Puede instalar el detector en la puerta o ventana, como se muestra a continuación.
2. Instalación del detector T2 Asegúrese de que la puerta o ventana esté cerrada. Pegue el adhesivo de espuma en la parte de abajo de los dos componentes del detector T2 y después fíjelos en el lugar seleccionado, como se muestra a continuación. Marco de puerta/ventana Puerta/ventana Se recomienda instalar el cuerpo principal del detector T2 en un lugar fijo (como el marco de la puerta), para evitar que se caiga al abrir y cerrar la puerta o ventana.
Anexo Contenido de la caja T2-A x1 2 adhesivos de espuma 1 guía de inicio rápido Elementos básicos Cuerpo principal Imán Indicador Parpadeo doble: Alarma activada Cinco parpadeos: Batería baja Funciones Según el magnetismo, cuando la distancia entre el cuerpo principal y el imán supere los 3 cm, el detector T2 enviará una señal de alarma a la aplicación EZVIZ.
Opérations Étape 1 Installation de la batterie 1 Faites glisser le capot arrière du T2, puis ouvrez le couvercle de la batterie, comme illustré ci-dessous. 2 Retirez la feuille d’isolation du logement de la batterie. Feuille d’isolation 3 Remontez le couvercle de la batterie et le capot arrière, puis terminez l’installation de la batterie.
2. Ajout du détecteur T2 -- Connectez-vous dans l’application EZVIZ. -- Recherchez votre concentrateur d’alarme Internet et accédez à la liste « Linked Device » (Appareil lié). -- Appuyez sur « + » de l’interface « Linked Device » (Appareil lié) et scannez le code QR du détecteur T2, situé sur le couvercle de sa batterie, pour lier l’unité T2 au concentrateur d’alarme Internet. • Option 2 Ajout en agissant sur le concentrateur d’alarme Internet 1.
Étape 3 Installation du détecteur T2 • Il ne faut pas qu’il y ait de champ magnétique fort à proximité du lieu d’installation. • Pour garantir la détection, la distance entre les deux parties du détecteur T2 doit être la plus faible possible (dans les 5 mm) lors de l’installation du détecteur T2. 1. Sélection de l’emplacement d’installation Vous pouvez installer le détecteur sur une fenêtre ou une porte, comme illustré ci-dessous.
2. Installation du détecteur T2 Veillez à ce que la porte ou la fenêtre soit fermée. Collez l’autocollant expansé au bas des deux parties du détecteur T2, puis fixez-le à l’endroit sélectionné, comme illustré ci-dessous. Cadre de porte/fenêtre Porte/fenêtre Il est recommandé d’installer le corps principal du T2 sur un élément immobile (comme le cadre de la porte) dans le cas où il tomberait quand vous ouvrez ou fermez la porte ou la fenêtre.
Annexe Contenu du carton 1 détecteur T2-A 2 autocollants expansés 1 guide de démarrage rapide Notions de base Corps principal Corps magnétique Indicateur Deux clignotements : alarme déclenchée Cinq clignotements : batterie faible Fonctions En fonction du magnétisme, quand la distance entre le corps principal et le corps magnétique est supérieure à 3 cm, le détecteur T2 envoie un signal d’alarme à l’application EZVIZ.
LIMITED WARRANTY Thank you for purchasing EZVIZ products. This limited warranty gives you, the original purchaser of the EZVIZ product, specific legal rights. You may also have other legal rights that vary by state, province or jurisdiction. The disclaimers, exclusions, and limitations of liability under this limited warranty will not apply to the extent prohibited by applicable law.
TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES OR ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES RESULTING FROM THE ABOVE USAGES WHATSOEVER. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLELAW, THE LATER PREVAILS. Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules.
UD06476B