User's Guide

Power Button
Charging
Port
Cord / Antenna
Touch-sensitive Area
Anchor
LED Light
Reset Button
Product Name
Model
Maximum Noise Value
Rated Voltage
Rated Current
Material
Size
Weight
Battery Capacity
Operation Time
Vibration Frequency
Pressure Sensor
Waterproof
Specification
Button Name
Power Button Short / Long Press Power On / Off
Restore SettingsShort PressReset Button
Operation Function
Button Description
Indicator Light Description
Contains
Intended use
Warning
5V
Lilac Kegel Exerciser
FM-LILAC-101
85dB
200mA
Body-safe silicon /ABS
Length: 101.7 mm. Diameter: 35 mm
61g
300mAH Li-Ion Polymer
3 Hours
7200 RPM
IPX6
10mmX3
Lilac Kegel Exerciser
Quick Guide
Storage Bag
USB Cable
User Guide
X1
X1
X1
X1
X1
Step 3: Enjoy the firmness brought by Lilac
Uterus
Pelvic Floor Muscles
Anus
Urocyst
Ureth
Vagina
Step 2: Connect to the Device
When a connection message pops up
on the phone, it means that the device
is successfully connected. The light on
the device is on and stops flashing.
Q&A
Non-App Mode
Step2:
Connect USB port to
smartphone power adapter
or computer.
A: First, please ensure that the Femometer App is permitted to
access to Bluetooth. Second, check whether the Bluetooth of your
phone is turned on and whether your device is turned on (the
indicator light will flash after turning on). If all the above conditions
are satisfied, please restart the device by pressing the power button
or 3 seconds and then pressing the power button again.
Q: Why is it disconnected during use?
A: The cord of Lilac is the antenna. Please ensure the cord is at least 4
cm outside your body to ensure that the normal signal connectionl.
Q: Though much strength was applied, there was still no change in
the pressure generated by the device. Why?
A: The device may be placed in the wrong position, resulting in the
pelvic floor muscles not exerting force on the sensor. Please adjust
the angle of Lilac to ensure the indicator light is facing upward and
Charging Battery
Step1:
*Note: Please make sure the whole part of the USB cable is fully inserted.
Step 4: Power Off
*Note: Lilac will turn off automatically 5 mins after disconnected from App.
Femometer Lilac
Kegel Exerciser
Step 1: Downlaod the App
Usage Procedures
Step3:
Cleaning
Storage
Features
Light on
Light flashing
Light off
State State Description
It is designed for women to practice vaginal muscles
after experiencing childbirth or the decrease of
vaginal muscle strength. It can help to improve the
contractility of pelvic floor muscles, relieve stress
urinary incontinence, bulging or prolapse of vaginal
uterus and other organs.
This product is only suitable for adult women who
have sexual experience. Keep out of children's reach.
Please stop using the appliance if you experience any
This product has a built-in pressure sensor. When the
device is under certain pressure, it will generate
vibration feedback. This product can be used with the
Femometer App for online pelvic floor muscle
training. You can also use the vibration feedback
function to take the training offline.
The device is turned on and connected to App
successfully. / The device is in a low power state.
The device is turned on but not connected to the App.
The device is off. / The device is out of power.
Go to the App Store or Google Play, search for "Femometer". Or,
scan the QR code to download.
Press the Power button on your
Lilac. The device is on when the
light is flashing.
Open the App and follow the
instruction to connect to your
device.
Insert the Lilac into the body slowly with the indicator light
facing up, and start exercising (It is recommended to use
water-soluble lubricant or condom).
*Note: Please leave the cord of Lilac outside the body, at least 4
cm length, to keep good signal without barrier.
The device will turn off after pressing
power button for 3 seconds. The
indicator light will turn off to
indicate turn-off status.
Turn on Lilac and squeeze the pelvic floor muscles to control the
vibration strength of the device.
Insert the charging cable
into the bottom of the
charging port.
Indicator light is on to show the device is
charging normally. The light will turn off
when the charging is finished.
*Note: Please leave the cord of Lilac outside the body, at least 4
cm length, to keep good signal without barrier.
Please clean Lilac with water-soluble detergent or anti-bacterial
soap and let it dry.
Keep Lilac in a cool and ventilated place. Avoid direct sunlight
and keep it away from children.
*Note: It is not recommended to use the device during
menstruation. If the
Q: My phone cannot connect to the App. Why?
Precautions for the Safe Use of the
Built-in Battery
1. Please use the USB cable to charge the product battery.
2. If the battery liquid comes into contact with your skin, please wash
with water and seek for medical assistance.
3. Please dispose of used batteries according to local (national or
regional) regulations.
4. Do not drop the battery from any height. Avoid any collision by
heavy objects or any scratches by sharp objects so as not to cause
any damage to the battery.
5. Do not expose the battery to any metal objects (including coins).
This can avoid short circuit, discharge, heat generation or leakage.
6. Do not try to disassemble the battery. This will lead to risks that
may damage the device.
7. Do not heat the battery or drop it into the fire so as to avoid
explosion.
8. Do not store in high temperatures and in strong direct sunlight.
9. If overheating occurs while charging or using the product, please
stop charging or using it immediately.
Cleaning and Maintenance
After turning off the device, please clean it with water-soluble
detergent or anti-bacterial soap and let it dry. Do not place in
direct sunlight, high temperatures, heavy pressure, or humid
places.
Fault Diagnosis
1. In the independent mode, turn on the product and press the
pressure sensing area. If the product does not vibrate, check if it
needs recharging.
2. In the phone control mode, turn on the product, if you are
unable to establish a connection with the app, please check the
phone and power.
Customer Service
E-mail:support@femometer.com
Warranty Terms & Conditions
1.Femometer warrants this product for a period of ONE (1) YEAR,
after the date of original purchase, against defects due to faulty
workmanship or materials. If you discover any defect and notify
magic motion during the warranty period, magic motion will, as its
discretion, replace the product free of charge.
2.The warranty covers working parts that affect the function of the
product. It does NOT cover cosmetic deterioration caused by fair
wear and tear or damage caused by accident, misuse or neglect. Any
attempt to open or take apart the product (or its accessories) will
void the warranty.
3.Claims under warranty must be supported by reasonable evidence
that the date of the claim is within the warranty period. To validate
your warranty, please keep your original purchase receipt together
with these warranty conditions for the duration of the warranty
period.
PURCHASING RECORD
Model Prchased:
Name:
Serial Number:
Phone Number:
Data of Purchase:
E-Mail Address:
FM-Lilac-101

Summary of content (2 pages)