Smart car products OPERATI Power battery Mobile phone stents Tire inflator pump Vacuum cleaner Glare flashlight Car washer
Bayu Wireless Products Series --Product Matrix Caused by One Power Unit We will continue to develop a variety of new products, please look forward to... If you need any new product modules, please scan the QR code to participate in the research and development......
Instructions of Power battery (Pages 1-14) 3 Instructions of Tire inflator pump (Pages 27-38) 5 Instructions of Car washer (Pages 5466) 2 Instructions of Vacuum cleaner 4 Instructions of Glare flashlight (Pages 15-26) (Pages 39-53)
1 Instructions of Power battery 01
Contents 01、Product introduction 02、Product model 03、 Product description 04、 Power switch 05、 Charging instructions 06、 USB output 07、Contact output 08、Rotating Product Introduction Power battery is a product that can provide electric energy for various devices. The body is equipped with Type-c, USB, DC, wireless charging, metal contacts and other input and output interfaces.
Produ ct Model and Specification Model 60 60A 132A 132B 192B Battery capacity 6000mAh 6000mAh 13200mAh 13200mAh 19200mAh Remainning power dispiay None Yes USB output None 5V/3.6A， 9V/2A， 12V/1.5A Wireless charging None DC - socket output None Wire configuration DC - USB cable Type-C Universal Data Cable (5A) Charging mode DC - interface Type-C (Universal Interface) None None 15W fast charging Maximum support 12V/8A Product size Diameter 65.
Product Description Standard Model (Model: 60A, 132A, 132B, 192B) Basic Model (Model: 60，132) Type-C Power Power USB 12V DC Contact Top wireless interface lamp interface interface output switch charging There is only one DC interface and contacts on the basic model, and there is no other interface. The DC interface is used to charge the internal lithium battery pack.
Power Switch 1. Standard mode (Model 60A, 132A, 132B, 192B) is equipped with a power switch and a power indicator. Touch the power switch to power on, touch it again to shut down all circuits, and stand by for more than 30 minutes. 2. Three power indicators, each representing about 33.3% of the power from left to right. When charging, the indicators equal to the battery capacity will flash, and the three indicators will be on normally after the battery is fully charged! Each represents about 33.
Charging Instructions 1. The standard models (models 60A, 132A, 132B and 192B) adopt Type-C Power Battery, which is the same as the Type-C charging port on the mobile phone. Users can use the mobile phone data cable with Type-C interface to charge, and the charging power is about 15W. The fast charging head of the mobile phone can improve the charging efficiency and shorten the charging time. (For example, support output 5V=3A-3. 6A-5A, 9V=2A-2. 5A, 12V=1A-2A, etc.).
2. The basic model (Model 60, 132) is equipped with a special DC line with USB, which is convenient for users to charge at any time in various places with USB output interfaces. If the line is lost, please do not use other lines to replace charging at will. Please contact our customer service in time and rearrange a line. 3. It is normal for the body and data line to heat up during charging. 4.
USB Output 1. USB output supports a variety of mobile phone fast charging protocols, which can charge various digital products such as mobile phones with data cables. 2. The maximum output power is 18W, which supports different voltages such as 5V=3.6A, 9V=2A and 12V=1 5A.
Metal Contact Output 1. The top output contact of Power Battery is positive on Product contact the left and negative on the right. It can supply power to many products we produce. 2. This output contact is designed to supply power for many series products developed by our company. 3. When the power switch is turned on, please be careful not to place metal objects or conductive objects on these two contacts, so as not to cause short circuit and burn out Output contact the internal circuit board. 4.
Rotating Buckle and Protective Ring The red protective ring is equipped with a rotating buckle inside, which can be combined with various series products to form an integrated body and provide electric energy for these products. When the rotating buckle is to be used, the red protective ring can be rotated and transferred away.
DC Block Output and Input Function The DC interface of Power Battery standard model (Model 60A, 132A, 132B, 192B) is a single output interface with DC specification of 5525, and the maximum sustainable output is 12V voltage/about 8A current/about 100W power. If the cigarette holder adapter is selected, it can supply power to various vehicle-mounted device or small vehicle-mounted electrical appliances with power less than 100W by adapter.
Wireless Charging 1. Some models of Power Battery are equipped with wireless charging function, and the output power is about 15W, which can support most mobile phones with wireless charging function in the market. 2. When charging wirelessly, there will be fever at the top of the mobile phone and Power Battery, which is a normal phenomenon.
Mobile phone stents (optional) When using Power Battery for wireless charging, it is recommended to purchase the special mobile phone holder produced by our company. When the Power Battery and the mobile phone holder are rotated and combined, they are put into the car cup seat, which can ensure that the mobile phone will not fall over during wireless charging during driving. (The holder needs to be equipped with this product, which is suitable for various models below 6.7 inches) 172.500mm 85.
Attention Warranty and After-sales Service 1. Do not disassemble or repair the ePower Battery by 1. This product strictly follows the provisions of the National yourself. Three Guarantees Law. 2. Do not fall, knock or shake the Power Battery. 2. This product enjoys life-long service, the warranty period is one 3. Do not rain or immerse energy in water, and year, the warranty period free maintenance and replacement parts, avoid long-term exposure to the sun.
Energy Bank Accessories Selection DC-cigarette lighter adapter Mobile phone holder Fast charging head of Household fast vehicle-mounted charging head The products on this page are for reference only.
2 Instructions of Vacuum cleaner 15
Contents 16、Product Introduction 17、Product Parameters 18、Product Description 19、Contact Output Product Introduction Vacuum cleaner is a multifunctional product. The body is small but has good suction. This is due to the excellent internal air duct design, all-alumi- num impeller and high-speed stable motor, and the filter screen in the dust hood adopts double-layer filter element design.
Product Parameters Model BYX01 Motor revolution 35,000 rpm Weight About 260g (excluding Power Battery) S hell material ABS+PC Impeller material Aluminum alloy Vacuum degree About 5500par Input voltage 12V DC interface 5525-12V Contact interface 12V Motor power 40-50W Product size Filter element Metal mesh filter element + composite filter element 180mm*66mm Battery capacity: Power Battery 192B (about 110 minutes) Power Battery132 (about 75 minutes) Power Battery 60 (about 35 minutes) P
Product Description Dust hood Filter element Left and right air outlets Vacuum cleaner switch Vacuum cleaner , DC Power Battery , DC Power Battery power switch Power Battery 18
Contact interface Product contact After the body and Power Battery are connected, Charging treasure will provide electric energy to this product through spring contacts.
Dust Hood and Filter Element 1. The dust hood is translucent, which is connected with the body through a rotating buckle. Dust hood 2. The vacuum cleaner adopts double-layer filter element, with metal filter screen on the outer layer and HEPA high-efficiency filter element on the inner layer. Both filter elements can be cleaned directly in water.
DC - Interface and Air Outlet 1. When there is no Power Battery or the is short of power, it can be directly plugged into the DC , interface through the matching connecting line to directly supply power to the vacuum cleaner. 2. Air outlets are arranged on both sides of the vacuum cleaner body.
Wireless Use Methods 1. Rotate and take out the decorative cover at the bottom of the vacuum cleaner, take off the decorative Vacuum cleaner ring on the Power Battery, and then rotate and combine the bottom of the vacuum cleaner with the top of the Power Battery. When rotating, aim at the contacts of the upper and lower parts to ensure normal power Decorative cover Decorative ring supply.
2. Press the Power Battery switch lightly to start power supply, then press the vacuum cleaner switch lightly to start the vacuum cleaner, and press it lightly again to close the vacuum cleaner. 3. Rotate the dust hood from the body, take out the internal filter element, and pour out the garbage in the dust hood.
Wired Use Methods When the Power Battery is not purchased or the Power Battery is short of electricity, the DC - interface on the vacuum cleaner can be connected by vehicle-mounted cigarette lighter line to supply power. The use method is the same as that of the wireless vacuum cleaner.
Cłeaning Method
Attention 1. When using for the first time, please ensure that the Power Battery is fully charged. 2. Please carefully check whether the parts in the vacuum cleaner are in good condition, and whether the dust collecting cover and filter screen are rotated and fixed in place as required. 3. Please read this instruction manual carefully. Please use the original spare parts of our company, and can't replace them with other spare parts. 4.
3 Instructions of Tire inflator pump 27
Contents 28、Product Introduction 29、Product Parameters 30、Product Description 31、 Product Introduction Wreless air pump is a wireless convenient one with small volume and high inflation efficiency. It is small in size, but thanks to the excellent structural design of motor and air pump by engineers and the continuous optimization and improvement of materials, it has better inflation efficiency and service life than many similar products.
Product Parameters Model BYC01 Type Wired/wireless Sizes 190mm*65mm Weight About 550g Power 80W-90W DC DC-552512V Voltage 12V Illumination lamp Have Cylinder block Metal cylinder block The tire pressure is set to stop when it is full according to the setting Unit defaults: 2.5 bar for cars, 2.4 bar for motorcycles, 45psi for bicycles, 8psi for basketball Adapter: Standard 3 adapters Maximum battery life: Tyres according to 195/55 R15 specifications: from 0-2.
Product Description Air outlet LED lamp Digital display screen DC interface - Heat dissipation hole Air pump decorative cover Decrease unit value Press shortly is the inflation mode selecIncrease unit value Running and shutting down the air pump bank decorative ring Contact Contact connection Energy bank Lighting lamp: turn on the lighting lamp 30
Wireless Model Use Methods (1) Rotate and remove the round decorative cover of the air pump and the decorative ring on the top of the Power Battery, and rotate and connect the air pump and the Power Battery in the direction of aligning with the metal contacts.
(2) Turn one end of the gas tube into the air outlet of the air pump, and connect the nozzle interface at the other end to the valve of the automobile tire. Press the nozzle switch to lock it. (3) Press the Power Battery power switch, and the air pump screen lights up at this time.
(4) The inflation mode defaults to the automobile tire mode, the unit is Bar, and the parameter is 2.50. Press R key to switch to other modes, and the default parameters of other modes are 2.4 bar for motorcycle, 45psi for bicycle and 8psi for basketball. Tire 2.50 bar Motorcycle 2.
(5) After setting the inflation mode and value, press the air pump start key again. The air pump will start inflation immediately. During the inflation process, a larger sound of air pump operation will appear as a normal phenomenon. High temperature position (6) When the inflation value reaches the set value, the air pump will automatically stop inflation. (7) When the air is just filled, both ends of the air pump body and gas tube will be hot at high temperature.
(8) When inflating at night, you can press the lighting switch to turn on the LED lamp to provide emergency lighting for the whole inflation process. (9) The air pump is equipped with 3 kinds of air nozzles that can be switched. When inflating non-tire products, please choose the appropriate air nozzle.
Wired Model Use Methods (1) When the Power Battery is not purchased or the energy bank is short of electricity, the configured vehicle-mounted cigarette lighter line can be directly used to directly supply power to the air pump. (2) Insert the lighter head into the vehicle-mounted cigarette lighter interface, and insert the DC interface at the other end into the DC seat interface on the left side of the air pump body to power on. 3.
Attention Warning 1. After long-term use of this product, the shell parts, (1) Please keep the heat dissipation holes open, so as to inflatable tubes and interfaces will be seriously hot and speed up the heat dissipation of the whole body. hot, and the continuous working time cannot exceed (2) When using, please open flammable and explosive 10 minutes. If you need to inflate for a long time, materials in the shell parts.
4 Instructions of Portable Lamp 39
Contents 40、Product Introduction 41、Product Parameters 42、 Power Switch and Focusing 43、DC - Interface and Nut Interface 44、Convex Mirrors and Lampshades 45、Contact output 48、Illumination lamp mode 49、 Bicycle light mode (selective) 50、 Product Introduction Portable lamp is a high-brightness lighting system. It is small in size, but it can provide users with lighting effect close to that of automobile headlights at night.
Product Parameter Model BYS01 Voltage 6V Lampshade Have Lamp bead Shell material DC interface Focus Electrodeless Quad nucleus zoom Sizes Extreme oxygen aluminum alloy Lens material Optical Overheat glass protection DC-5525-12V 12V Contact interface About Weight 100mm '* 65mm Automatic power reduction when overheating About 380g (excluding Power Battery) Support interface inch 1/4 screw interface Switch Gear 5 (Highlight, Medium Light, Low Light, Flash, SOS) Maximum battery life Low bright
Power Switch and Focusing 1. Power Switch Power Switch has five gears: highlight mode, medium bright mode, low bright mode, flash mode and SOS mode. 2. Press the power switch lightly to turn on the highlight mode. Press it again within 2.5 seconds to jump to the next Portable light switch and gear switch gear, then press it again to jump to the next gear in turn. After more than 2.5 seconds, press it again to turn off the power. Power Battery power switch 3.
DC Interface and Nut Interface 1. The vehicle-mounted power cord configured by the product can be connected for Inch 1/4 nut DC wired power supply. 2. Support a variety of inch 1/4 screws for matching use, such as tripod, bicycle holder, waist holder, etc.
43
Convex mirror Convex Mirrors and Lampshades 1. Convex mirrors make illumination more concentrated. 2. The lampshade can be installed on the top of the product, so that the product can change from the lampshade concentrated mode to the astigmatism mode of the lighting lamp.
Usage 1. Rotate and remove the round decorative cover of the portable lamp and the decorative ring on the top of the Power Battery, and rotate and connect the portable Lamp Contact Power Contact Decorative Cover lamp and the Power Battery in the direction aligned with the metal contact. 2. Lightly press the power switch of the Power Battery, and see that three indicators are on, indicating that the Power Battery has been turned on and started to supply power.
2. Press the power switch on the body of the product lightly to turn on the concentrated lighting mode, hold the front section of the body of the product and stretch forward to zoom, and adjust the aperture size and irradiation distance steplessly. 3. This product has high brightness, medium brightness and low brightness in daily lighting. The lower the brightness, the less current consumption, so the longer the battery life.
4. The lampshade can be directly installed on the top of the product, and the two are connected by pressing. After installing the lampshade, the product can be changed from focusing mode to astigmatism mode like lighting lamp, providing a lighting effect of about 360 degrees at close range.
5. If there is no Power Battery or Power Batteryis short of electricity, you can use the vehicle-mounted cigarette lighter data cable attached to the product for power supply.
Bicycle light mode (selective) The bicycle handle holder can be assembled to highlight the bicycle lamp 50
Fishing lamp mode (selective) Multi-triangular holder can be assembled as fishing lamp 51
Waist lamp mode (selective) Combined with special waist hanging holder, it is assembled into waist headlights 52
Illumination lamp mode Combined with special lampshade, it is assembled as lighting lamp 48
Attention 1. The LED lamp inside this product will generate a lot of heat when working, which will cause the body to burn. When holding it in hand, please hold it on the Power Batteryas much as possible to avoid scalding the hand by the hot product shell. 2. If there is no requirement for brightness, it is recommended to turn on medium or low brightness lighting mode, which can effectively reduce the calorific value of the body. 3.
Accessories Purchase Tripod, bicycle holder, waist holder Tripod Bicycle holder Waist holder 54
5 Instructions of Car washer 54
Contents 55、Product Introduction 56、Product Parameter Product Introduction Wireless washer cannon is a convenient and bulk cleaning equipment with small volume and large water pressure. Although it is small in size, it can have great water pressure thanks to the excellent water pump structure design of 57、Product Description 58、 engineers. The washer cannon is equipped with 0-degree and 40-degree water Wireless Use Methods 59、 nozzles to meet different cleaning needs.
Product Parameter Power Battery/cigarette lighter Model BY-XCJ01 Motor All copper motor Power supply Current About 250-300L/H Water type 0 degrees/40 degrees Water pump Ultra-high pressure three-plunger metal pump DC DC-5525-12V 12V Voltage 12V Contact Material ABS + aluminum + stainless steel + copper Sizes approximately 400mm*180mm*87mm Weight is about 1200-1500g (depending on the model of Power Battery) Endurance: Power Battery192 (about 50-65 minutes) Power Battery 132 (about 30-40 min
Product Description Water outlet nozzle Outlet extension tube Heat dissipation hole inlet interface Power Battery switch washer cannon switch Power Battery 57
Wireless Use Methods 1. Rotate and remove the round decorative cover at the tail of the washer cannon and the decorative ring at the top of the Power Battery, and rotate and connect the washer cannon and the Power Batteryin the direction of aligning with the contacts.
2. The extension tube is rotationally connected to the water outlet of the Power Battery, and the water tube interface is connected to the water inlet of the Power Battery. 3. Put the filter screen at the other end of the water tube into a bucket full of water, or directly put it into a clean river or stream with no urgent water flow.
60
4. Press the 01 power switch on the Power Battery, and then press the 02 red switch beside the handle of the car washer, and the water outlet tube can discharge water at high pressure. 5. The nozzle is equipped with two water shapes, 0 degree and 40 degree respectively. When replacing the nozzle, please slide the copper interface on the extension tube backward to take out the original nozzle for replacement.
Wired Use Methods 1. When the Power Battery is not purchased or the Power Battery is short of electricity, the configured vehicle-mounted cigarette lighter line can be directly used to directly supply power to the car washer. 2. Insert the lighter head of the line into the vehicle-mounted cigarette lighter interface, the DC, interface at the other end and the DC ,seat interface at the rear of the washer cannon handle to power on.
Attention Washer Cannon Safety Warning Please read the following warnings and instructions carefully. Failure to comply with the warnings may lead to damage to (1) Before storage, please completely drain the people and things. water in the machine and water tube. 1. It is not allowed to shoot high-pressure water at others or (2) Please wipe the body with a soft brush or clean various parts of human body. 2. It is not allowed to inject water into device containing electrical cloth. components.
Suggested Car Washing Method (for reference only) 1. Clean the floating sand on the surface of the car paint with the high-pressure water from the washer cannon and wet the car body. 2. Pour car wash 3. powder or car wash foam watering can liquid into the foam to the interface on body with sponges, watering can, add the extension tube soft brushes, car clear of wash mops and water proportion shake well. in and Connect the the washer cannon, and spray 4. Wipe car the 5.
Frequently Asked Questions Fault Solutions The nozzle leaks or the outlet pressure suddenly increases The nozzle is blocked.
After-sales Service 1. This product strictly follows the provisions of the National Three Guarantees Law. 2. Under the condition that the products and packaging are complete and do not affect the secondary sales, you can enjoy the 7-day return service without reason. 3. In case of non-human failure within 15 days of use, we will provide free replacement service. 4. This product enjoys lifelong service, with a warranty period of one year.
Product Selection Power Battery can rotate and combine all the following parts into a whole and provide strong electric energy.
FCC Statement This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment.
