AINANNY with Monitor USER MANUAL EN Smart baby monitor FR Babyphone intelligent ES Vigilabebés inteligente DE Intelligentes Babyphone IT Baby monitor intelligente Compatible with Amazon Alexa & Google Assistant
EN Quick start guide 1. Packing list 4. Connection of camera and App 2. Product description 5. Pairing of camera and monitor 3. Installation 6. Usage 7. FAQ 1. Packing list Camera X1 Power adaptor X2 USB cable X2 Reset pin X1 Monitor X1 Bracket X1 Headgear X1 Quick guide X1 Warning sticker X2 Screws X3 2.
EN Zoom in/out Microphone Menu Direction OK Call Back Status light of charging Status light of using Antenna ON/OFF button SD card slot Speaker Reset Micro USB Screen holder Status light Orange light: Charging of charging Green light: Fully charged Status light Yellow light: The monitor is on of using No light: The monitor is off Antenna Adjust the angle to get better signals ON/OFF button Long press 5s to turn on and turn off the monitor Zoom in/out Menu Zoom the image in 1X, 2X or 4X On
EN 3. Installation 1 Install the camera on a flat surface. 2 Use the included mounting bracket to fix the camera to a clean surface. 4. Connection of camera and App Connect the camera to the App The camera can be connected both to the monitor and the App. Generally, it is connected to the monitor by default. Follow the steps below to connect the camera to the App: 1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't support 5 GHz Wi-Fi. 2.
EN Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available 2.4GHz 5GHz 5. Pairing of camera and monitor Power on the camera and the monitor, and they will automatically connect. If the connection fails, please follow the steps below to pair.
EN 6. Usage Note: If you have addded 2 cameras, the monitor screen will display 2 live views at the same time. If you want to set parameters or enable functions of one of the cameras, you need to select the camera first. The method of camera selection is as follows: Press the back key on the home page to enter the switch camera mode and the camera icon will flash. Press the left and right buttons to switch the camera to be controlled.
EN Photo & video Take a photo: You can take a photo when you want to capture an interesting scene of baby. Press Menu button on the monitor screen, select and press OK to take a photo. Record a video: You can record a video when you want to capture a meaningful time of baby. Press Menu button on the monitor screen, select and press OK to record a video. View the taken photos and recorded videos: 1. Press Menu button on the monitor screen, select and press OK to enter the interface. 2.
EN Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the monitor screen, and select > Feeding Reminder. 2. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start time setting. 3.
EN Temperature and humidity detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the monitor screen, and select > Temperature and humidity. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to startsetting. 3.
EN General setting Set up brightness: 1. Press Menu button on the monitor screen, select enter the interface. and press OK to 2. Press UP and DOWN direction buttons to adjustbrightness. Set up time: 1. Press Menu button on the monitor screen, and select > Time setting. 2. Press direction buttons to change date, time and time displaying mode. Set up language: 1. Press Menu button on the monitor screen, and select >Language. 2. Select the language you need.
EN 7. FAQ Q: The monitor cannot be previewed properly? A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly. Q: Cannot find the pairing button? A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the monitor. (To enter the pairing interface of the monitor, press Menu button on the monitor screen, and select > Camera Management.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.