Baby Monitor Baby 2S&1M ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Please consult this checklist for all parts.
Description Status light Microphone Speaker SD card slot Call button & Pair button Reset Micro USB Micro USB DC 5V/1A Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.
Description Antenna ON/OFF button SD card slot Speaker Reset Micro USB Screen holder Micro USB DC 5V/1A Status light of charging Orange light: Charging Status light of using Yellow light: The display is on Microphone Capture sound for your video Antenna Adjust the angle to get better signals Green light: Fully charged No light: The display is off ON/OFF button Long press 5 seconds to turn on and turn off the display Zoom in/out Zoom the image in 1X, 2X or 4X Menu On homepage, press to en
Installation 1 Install the camera on a flat surface. 2 Or, use the included mounting bracket to fix the camera to a clean surface.
Connection Connect the camera to the display Power on the camera and the display, and then the camera will connect to the display automatically. The connection is distance limited, so make the distance between the camera and the display is no more than 200m. Disconnect the camera to the display: 1. Press Menu button on the display screen, and select > Camera Management. 2. Long press OK button on the display screen to release the binding. Reconnect the camera to the display: 1.
Usage Rotate the camera You can adjust the monitoring angle for a better vision. The direction buttons on the display screen are available when the camera is powered on. Press direction buttons to rotate the camera horizontally and vertically, for a better vision. Photo & video Take a photo: You can take a photo when you want to capture an interesting scene of your baby. Press Menu button on the display screen, select and press OK to take a photo.
Usage Play music You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select. Press Menu button on the display screen, select and press OK to enter music interface. You can select different music, change the music cycle mode, or adjust the music volume. Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the display screen, and select > Feeding reminder. 2.
Usage Humiture detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the display screen, and select > Humiture detection. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to start setting. 3.
Usage Smart care You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on. 1. Press Menu button on the display screen, and select > Smart care. 2. Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection and alarm volume, and press OK to start setting. 3.
Usage General setting Set up brightness: 1. Press Menu button on the display screen, select and press OK to enter the interface. 2. Press UP and DOWN direction buttons to adjust brightness. Set up time: 1. Press Menu button on the display screen, and select > Time setting. 2. Press direction buttons to change date, time and time displaying mode. Set up language: 1. Press Menu button on the display screen, and select 2. Select the language you need. > Language.
FAQ Q: The display cannot be previewed properly? A: Check whether the display has connected to the camera. If not, pair the camera and the display firstly. Q: Cannot find the pairing button? A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press Menu button on the display screen, and select > Camera Management.
Functions Pan/Tilt Rotate your camera by sliding on your smartphone, providing you with a good vision. Video flip Flip your video stream up or down for maximum flexibility. Motion detection The camera can detect movement, and then the camera will send you push notifications and app alerts. Crying detection The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
