How to Guide

ALL SURFACE
TV HANGER
WD-2060
Installs easily into all surfaces. No anchors needed!
32-80”
FIXED MOUNT-HOLDS 100lbs
Parts List:
(1) 26” HANGMAN®
Wall Bracket
(1) 26”
TV Bracket
(1) Bubble Level
(11) Anchorless
Walldog™ Screws
(2) M8 (8mm)
x 35mm Bolts
(2) M6 (6mm)
x 35mm Bolts
(2) M5 (5mm)
x 35mm Bolts
(2) M4 (4mm)
x 35mm Bolts
(2) M4 (4mm)
x 12mm Bolts
(2) M5 (12mm)
x 12mm Bolts
(2) M6 (6mm)
x 20mm Bolts
(2) M6 (6mm)
x 12mm Bolts
(2) M8 (8mm)
x 20mm Bolts
(2) M8 (8mm)
x 16mm Bolts
(2) Small Washers
For 4mm Bolts
(6) Bolt Washers
(1) Security cable (1) Wall-Dog™ screw for security cable
(2) M8 (8mm)
x 45mm Bolts
Check out our No Stud 65”TV Hanger®
Don’t want to damage your walls but have a
huge TV to hang? We got you.
WARNING: Before starting assembly, verify all parts
are included and undamaged. If any parts are missing
or damaged, do not return to your dealer; contact
customer service. Never use damaged parts!
© Hangman Products 2020
Have a question? Give us a call.
(818)-610-0487 | Mon-Fri | 7am-6pm PST
Share your installation video with
#hangitlikeapro for a chance to be featured!
Scan QR for
installation video
CAUTION:This WD-2060 mount is intended for use
only with TVs weighing up to 100lbs.
Use with TVs heavier than 100lbs. may result in collapse of
the mount and it’s accessories causing possible injury.
All Surface TV Hanger - Installation Instructions
14”x 8.5” - Printed front and back - Folded 3.5”x 8.5”