WG‐‐500P Hotspott in a Printer W 500P WGP Ho otspot in a Printer Useer Man M ual 0
WG‐500P Hotspot in a Printer Copyright Notice Copyright © 2013‐2022 Handlink Technologies Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission. Protected by TW patent 223184, JPN patent 3099924, USA patent US8,010,421 B2, EU patent EP1404056BI, China patent ZL03204640.5.
WG‐500P Hotspot in a Printer Contents 1 2 3 Introduction ........................................................................................................... 4 1‐1 Package Contents ................................................................................... 5 1‐2 Features ................................................................................................. 5 1‐3 Precautions ............................................................................................
WG‐500P Hotspot in a Printer 3‐2‐5‐2 WAN/LAN ............................................................................. 65 3‐2‐5‐3 Server ................................................................................... 68 3‐2‐5‐4 Customization ...................................................................... 71 3‐2‐5‐5 Portal Page ........................................................................... 82 3‐2‐5‐6 Advertisement ..................................................................
WG‐500P Hotspot in a Printer 1 Introduction The WG‐500P is a compact intelligent gateway. It provides Plug’ Play Internet access, advanced security and network management. The WG‐500P is designed for service providers, system integrator or hotspot venue operator without backend‐RADIUS‐Server to have integrated solution for rapid deployment, which can start hotspot service quickly and easily and enhance service performance.
WG‐500P Hotspot in a Printer 11 Package Contents Please inspect your package. The following items should be included: WG‐500P z z z z z z z One WG‐500P One Thermal papers (50 meter) One Power Adapter One Ethernet Cable (1.5 meter) One Quick Installation Guide Two Detachable Antenna One Product CD If any of the above items are damaged or missing, please contact your dealer immediately.
WG‐‐500P Hotspott in a Printer 13 z z z z z 14 4 Precau utions Neverr remove orr open the cover. c You may m suffer serious inju ury if you to ouch these parts. Neverr install the system in th he wet locaations. Use on nly the original fitting AC A power adapter otheerwise therre is a dange er of severee electrical shock. s Avoid exposing th he WG‐500P P to direct sunlight s or another a heaat source. Choosse a well‐ventilated areea to positio on your WG G‐500P.
WG‐500P Hotspot in a Printer Figure 1‐4‐2 Front Panel Figure 1‐4‐3 Rear Panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Paper roll housing Printer Cover Tear Bar, for paper cutting Button A Button B Button C Push Button, for printer cover opening Reset Button DC power supply connector RJ45 port Micro USB connector WLAN LED (Green) UPLINK LED(Yellow) SMA connector SMA connector z WLAN LED: Off: The wireless is not ready. Green light: The WG‐500P has established a valid wireless connection.
WG‐500P Hotspot in a Printer z z z UPLINK LED: Off: A port has not established any network connection. Yellow light: A port has established a valid 10/100 Mbps network connection. Yellow Blinking: 10/100 Mbps traffic is traversing the port. Reset Button: The WG‐500P has a reset button at the rear panel of the device. Use this function to reset the system back to factory defaults. Power Jack: Used to connect the external power supply with the WG‐500P.
WG‐500P Hotspot in a Printer 142 How to load paper rolls Please follow the steps to correctly load paper rolls.
WG‐500P Hotspot in a Printer 15 Technical Specifications 151 Hardware Specifications Network Specification z z z z z IEEE802.3 10BaseT Ethernet IEEE802.3u 100BaseTX Fast Ethernet IEEE802.11b/g/n Wireless LAN ANSI/IEEE 802.
WG‐500P Hotspot in a Printer z z z Storage Temperature: ‐10 to 60°C Operating Humidity: 20~80% non‐condensing Storage Humidity: 20% to 90% non‐condensing Certifications z FCC part 15 Class B, CE , C‐Tick , VCCI Dimension z Size: 109×155×90 (W×D×H )mm z Weight: About 340g (Net) Printer Tray z Push button: push to open printer cover z Tear bar: cuts receipt paper z Button A: flashing when printer cover is opened z Paper roll housing: put paper roll here Paper Roll and Printing z z z z z z z z z z z Paper
WG‐500P Hotspot in a Printer z z z Supports 30 Simultaneous Users IP Plug and Play (iPnP) HTTP Proxy Support z z WEP64/128bit z z z z z z z z z z z z WPA2-PSK(AES) z z Local Account: 256 Max Session Number: up to 16384 WPA-PSK (TKIP) WPA/WPA2 Mix mode SMTP Server Redirection DHCP Server(RFC 2131) DHCP Relay(RFC 1542) Static IP WAN Client DHCP WAN Client PPPoE WAN Client(RFC 2516) PPTP WAN Client NAT(RFC 1631) IP Routing NTP (Network Time Protocol) Support Marketing Cooperation z Advertisement URL
WG‐500P Hotspot in a Printer z z z z z z z z z z z SSL Administration VPN Pass through (IPSec/PPTP) Customize SSL Certificate Pass Through IP/MAC/URL Address Restricted Destination Filtering IP/URL VPN (IPSec/PPTP) Pass through PPTP VPN Client WEP WPA WPA2 WPA/WPA2 Mix mode Management z Web‐based Management Tool z Firmware Upgrade via HTTP/TFTP z Wizard setup for step‐by‐step Configuration z Backup/Restore/Factory Default Setting z Remote Authorized Management z Real‐time Session List z Syslog (System/Su
WG‐500P Hotspot in a Printer 2 Installation 21 Connecting the Antennas The WG‐500P provides two antenna connectors on the rear of the unit. 22 Installation Requirements Before installing the WG‐500P, make sure your network meets the following requirements. System Requirements The WG‐500P requires one of the following types of software: z z z z z z z z Windows 98 Second Edition/NT/2000/XP/Vista Red Hat Linux 7.3 or later version MAC OS X 10.2.
WG‐500P Hotspot in a Printer Dynamic IP z Dynamic IP Setting Fixed IP z Your fixed IP address for the WG‐500P z Your subnet mask for the WG‐500P z Your default gateway IP address z Your DNS IP address PPPoE z Your user name and password from your ISP PPTP z z z z z z PPTP Server IP Address from your ISP PPTP Local IP address from your ISP. PPTP Local IP subnet mask from your ISP.
WG‐500P Hotspot in a Printer 23 Getting Start WG‐500P Connection 1. Connect the DC power adapter to the WG‐500P and plug it into a power socket. 2. Connect WG‐500P and xDSL modem with an Ethernet Cable.
WG‐500P Hotspot in a Printer Configure TCP/IP of your computer For Windows user, 1. Click Start > Control Panel, click Switch to Classic View and double click on Network Connections. 2. Right click on the Local Area Connection and click Properties. 3. Double click Internet Protocol (TCP/IP). 4. Choose Obtain an IP address automatically. 5. Click OK to close the Internet Protocol (TCP/IP) Properties and click OK again to close the Local Area Connection.
WG‐500P Hotspot in a Printer 3 Configuring the WG500P 31 Setting Wizard Step 1: The ESSID’s name by default is related to the last 4 numbers of Wlan MAC. If the Wlan MAC is“00‐90‐0E‐00‐12‐34＂, the default is“Wireless‐1234_1(2,3,4)". Please serach ESSID“Wireless‐1234_1＂and connect it. Step 2: Start your browser, and then enter the factory default IP address 10.59.1.1 in your browser’s location box. Press Enter.
WG‐500P Hotspot in a Printer Figure 3‐1‐3 Wizard Setup Screen Figure 3‐1‐4 System Quick View Note: 1. This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers. 2. Username and Password can consist of up to 20 alphanumeric characters and are case sensitive. 3.
WG‐500P Hotspot in a Printer WG‐500P Configuration Program, please press the reset button to load the device to manufacturer defaults. 4. If the WG‐500P doesn’t send packet in 5 minutes (default), the WG‐500P wills logout automatically. 5. Proxy needs to set disable first when administrator accesses admin UI. Step 4: Internet Connection Setting Select the appropriate Internet connection type to connect to your ISP.
WG‐500P Hotspot in a Printer Figure 3‐1‐6 Internet Connection Setting Screen Static IP Setting If Static IP Setting is selected, then this screen will appear. Enter the IP address information provided by your ISP.
WG‐500P Hotspot in a Printer Item Default Description IP Address 0.0.0.0 Enter the IP address provided by your ISP. Subnet Mask 0.0.0.0 Enter the subnet mask for the IP address. Gateway IP Address 0.0.0.0 Enter the Gateway IP Address provided by your ISP. Primary DNS Server Empty Enter the primary DNS server IP address for the xDSL/Cable connection (provided by your ISP).
WG‐500P Hotspot in a Printer up to 80 alphanumeric characters and is case sensitive. PPP MTU Setting 1492 MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting 1452 MSS (Maximum Segment Size) specifies maximum segment size. Service Name Empty Enter the service name provided by your ISP. The service name can consist of up to 64 alphanumeric characters and is case sensitive.
WG‐500P Hotspot in a Printer PPTP Client (Point‐to‐Point Tunneling Protocol) If PPTP Setting is selected, then this screen will appear. Please enter the IP address, Username and Password provided by your ISP. Figure 3‐1‐9 Internet Connection Setting Screen—PPPoE Setting Item Username Default Empty Description Enter the user name provided by your ISP. The user name can consist of up to 80 alphanumeric characters and is case sensitive. Password Empty Enter the user password provided by your ISP.
WG‐500P Hotspot in a Printer enables your WG-500P to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes.
WG‐500P Hotspot in a Printer Step 5: Wireless Setting Wireless Setting: This page allows you to Channel ID and 802.11 Mode for wireless connection. Figure 3‐1‐10 Wireless Setting Screen Item Default Description Channel 6 Enter the channel ID for wireless connection. 802.11 Mode 802. 11n + 802.11g + 802.11b Enter the 802.11 Mode for wireless connection.
WG‐500P Hotspot in a Printer Step 6: System Setting System Setting: WG‐500P allows to change the administrator’s Username and Password, and an NTP server setting. Figure 3‐1‐11 System Setting Screen Item Username Default admin Description Enter the user name. The user name can consist of up to 80 alphanumeric characters and is case sensitive. Password admin Enter the user password. The password can consist of up to 80 alphanumeric characters and is case sensitive.
WG‐‐500P Hotspott in a Printer 32 Advanced Setup Thee Advanced d Setting enables e you to confiigure advanced settin ngs related d to acceessing the Internet, inccluding, AUTTHENTICATION z AUTHEENTICATION N z RADIU US BILLLING z BILLIN NG z ACCOU UNTING z CREDIT CARD MA ANAGEMENTT z SYSLO OG z SESSIO ON TRACE z BANDW WIDTH z SNMP P SEC CURITY z PASS THROUGH T z FILTER RING z SECUR RE REMOTE SYSTEM z SYSTEM z WAN / LAN z SERVEER z CUSTO OMIZATION z PORTA AL PAGE z ADVER RTISEMENTT z WALLEED GARDEN N z DD
WG‐500P Hotspot in a Printer 321 AUTHENTICATION 3‐2‐1‐1 Authentication Figure 3‐2‐2 Authentication Item Authentication Type Default Description No Authentication Option: No Authentication, Built-in Authentication or User Agreement. No Authentication Subscriber can direct access the Internet without enter username and password. Built-in Authentication WG-500P provides “Built-in Authentication” for service provider to build up an Internet service without any extra authentication software.
WG‐500P Hotspot in a Printer redirect subscriber login page. Copy and paste the following HTML Code into your home page to produce user agreement login page. Figure 3‐2‐3 Preview Redirect Login Page Code Item Current User Information Backup Default 1 Min(s) Description The system provides automatically backup account information and unused account to flash ROM. This function allow administrator to adjust the backup time. The default value is 1 minute.
WG‐500P Hotspot in a Printer 3‐2‐1‐2 RADIUS Figure 3‐2‐4 Authentication Setting Screen Item RADIUS Authentication Default Disable Description Option: No Authentication or RADIUS Server. Disable (No Authentication) Subscriber can direct access the Internet without enter username and password. Enable (RADIUS Authentication) WG-500P provides “RADIUS Authentication” for service provider to build up an Internet service with RADIUS server.
WG‐500P Hotspot in a Printer Accounting Port 1813 Enter the accounting port number; the accounting port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Share Secret Key Empty The share secret key, the key number also has to match with the Server setting. Up to 64 characters are allowed. Secondary RADIUS Server Server IP Empty Enter the IP address of RADIUS server.
WG‐500P Hotspot in a Printer 322 BILLING 3‐2‐2‐1 Billing The function is used to setup a billing profile. A billing profile is a description of how you want to charge your customer. Figure 3‐2‐5 Billing Setting Screen Item Enable Credit Card Service Default Disable Description Enables or disables the credit card service. Before you enable credit card service, make sure that your credit service is configured to work and the currency is American dollars.
WG‐500P Hotspot in a Printer system can keep and accumulate every single usage time until the pre-defined usage time run out. Idle Time Out 5 Min(s) The idle time out valid range is 1-1440. If the idle time out is set as 5 minutes, it means if the account doesn’t send packet in 5 minutes, the account will logout automatically. Billing Profile Currency $ Enter the appropriate currency unit or currency symbol. Number of decimals places 2 Enter the number. The field maximum value is 3.
WG‐500P Hotspot in a Printer Figure 3‐2‐6 Accumulation and Time to Finish Figure 3‐2‐7 Pre‐paid Procedure Diagram 35
WG‐500P Hotspot in a Printer 3‐2‐2‐2 Accounting This function allow service provider to generate the subscriber accounts. Figure 3‐2‐8 Accounting Setting Screen Item Default Description Expiration Un-used account will be deleted 24 hours after ~hours automatically Accumulation account will be Enter the number of hours/minutes/days. The field maximum value is 30 hours/minutes/days. 3 months deleted after last logged in ~ Enter the number and select time unit from list box.
WG‐500P Hotspot in a Printer Figure 3‐2‐9 Account Process DiagramCan be replenished by subscriber=Enable Item Default Button A~C Description Define each button’s billing profile. Select one billing profile by clicking in the list box. Print to… Account Generator Printer Select a printer to print out your account.
WG‐500P Hotspot in a Printer Figure 3‐2‐11 Account Generator Printer (Time to Finish) Figure 3‐2‐12 Account Generator Printer (Accumulation) Note: Before configuring the accounting, you have to setting the billing profile of Web‐based account generator panel.
WG‐500P Hotspot in a Printer Example: If press 7 times z Discount Price Plan based on “Button Presses” is disabled. Figure 3‐2‐13 Example 1 Amount: 7 x $2.00= $14.
WG‐500P Hotspot in a Printer z z Discount Price Plan based on “Button Presses” is enabled. The Charge by level is disabled. Figure 3‐2‐15 Example 2 Amount: 7 x $ 1 = $ 7.00 Below is an example of the account printout.
WG‐500P Hotspot in a Printer z z Discount Price Plan based on “Button Presses” is enabled. Charge by level is enabled. Figure 3‐2‐17 Example 3 Amount: 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00 Below is an example of the account printout.
WG‐500P Hotspot in a Printer z Discount Price Plan based on “Button Presses” Figure 3‐2‐19 Discount Price Plan Setting Screen Item Default Description Charge by levels Enable Enables or disables the charge by levels function. Level 1‐10 This field displays the level number of charge rate.
WG‐500P Hotspot in a Printer 3‐2‐2‐3 Credit Card WG‐500P provides three credit card services (Authorize.net, iValidate.net, Secure Pay, Paypal and WorldPay) that allow service provider to authorize, process, and manage credit transactions directly from Internet.
WG‐500P Hotspot in a Printer Item Default Description Authorize.net Version 3.1 This field displays the merchant version. Merchant ID Empty Enter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 50. Merchant Password This is a Merchant password that you’re received from your Merchant Provider.
WG‐500P Hotspot in a Printer merchant/processcc.a sp Secure Pay Merchant ID Empty Enter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 7. Secure Pay Address https://www.securepa Enter the address of SecurePay Payment Gateway. y.com.au/securepay/p ayments/process2.as p Paypal Business Empty Enter your Merchant PayPal account.
WG‐500P Hotspot in a Printer displayed on the login page Click Apply button to save the new settings and the success dialog box appears. Click on Back to return to Accounting setting screen. Note: Please leave the Administrator＇s Email address in Advanced/Syslog/Email portion.
WG‐500P Hotspot in a Printer 323 MANAGEMENT 3‐2‐3‐1 Syslog The function allows the device to transmit event messages to your syslog server or your email address for monitoring and troubleshooting. Syslog Setting Figure 3‐2‐21 Syslog Setting Screen Item Send to Syslog Server Default Description Disable Enables or disables the syslog server function. Empty Enter syslog server’s IP address. The WG-500P will send all of its Syslog on LAN Server IP Address logs to the specified syslog server.
WG‐500P Hotspot in a Printer Item Default Description Syslog on WAN Server 1 IP Address Empty Enter IP address of first syslog server. Server 2 IP Address Empty Enter IP address of second syslog server. Send to Email Disable Enables or disables the send to e-mail function. Empty Enter the SMTP server IP address or domain name. The maximum E-mail Server IP Address or Domain Name allowed characters length is 50. SMTP Port 25 The SMTP port allowed range is 25 or 2500 to 2599.
WG‐500P Hotspot in a Printer Log Categories Figure 3‐2‐22 Log Settings Screen Item Default Description System Device Information Every 10 minute(s) The range is 5~60 minutes. The log included system information would be sent according to specified interval time. Format： PRODUCT=WG-500P:VER=2.00.00;LOGNAME=DVI; DATE=07Mar26;TIME=11:30:00; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.
WG‐500P Hotspot in a Printer rebooted or restarted sent. Format： PRODUCT=WG-500P;VER=2.00.00;LOGNAME=SUN; DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei; COUNTRY=Taiwan; FIRMWARE=v1.01.
WG‐500P Hotspot in a Printer DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; USER_NUM=15;SEQ=1-5;USER_MAC=02-34-3e-01-00; User User Login When user logged-in A log including users information will be sent when user logged–in Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=ULI;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.
WG‐500P Hotspot in a Printer 0 User Type = Dynamic / Super / User Agreement / Radius / No-Auth Current User List Every 10 minute(s) The range is Range 5~60 minutes. A log including logged-in users information will be sent according to specified interval time Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=CUL;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NUM=0;SEQ=1-5; USER_NAME=asdfg12,USER_IP=10.59.1.
WG‐500P Hotspot in a Printer PRODUCT=WG-500P;VER=2.00.00;LOGNAME=BLA; DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=username; BILL_TYPE=Cash, BILL_AMOUNT= USD50.00 Billing Type= Cash | Credit_Card； Billing Amount = xx.xx Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD…… Click Apply button to save the new settings and the success dialog box appears. Click on Back to return to Logs setting screen.
WG‐500P Hotspot in a Printer Item Default Description TFTP Server Session Trace Disable Disables or enables session trace function. Primary TFTP Server IP Empty Enter the IP address of the primary TFTP server. Empty Enter the IP address of the second TFTP server. 10 minutes The field means to send the session trace log file every interval Address Secondary TFTP Server IP Address Send Session Trace log file every~ minutes. Send to Email minutes. The value range is 5 to 1440 (minutes).
WG‐500P Hotspot in a Printer 3‐2‐3‐3 Bandwidth The function enables administrator to limit bandwidth usage on a per user basis (MAC address). That prevents users from consuming a disproportionately large amount of bandwidth so every user gets a fair share of the available bandwidth. Figure 3‐2‐24 Bandwidth Setting Screen Item Default Description Bandwidth Disable Enables or disables Bandwidth Management. Maximum Upstream 64Kbps Specify the amount of upstream bandwidth.
WG‐500P Hotspot in a Printer 3‐2‐3‐4 SNMP The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration screen. Figure 3‐2‐25 SNMP Setting Screen Item Default Description SNMP Disable Disables or enables the SNMP management.
WG‐500P Hotspot in a Printer 324 SECURITY 3‐2‐4‐1 Pass Through This function allow administrator to set some special devices pass through the WG‐500P system. Because some network devices might be constructed under the WG‐500P. However these devices needn’t be checked and authorized. The WG‐500P provides a pass through list and the administrator can control which devices can be pass through with authentication.
WG‐500P Hotspot in a Printer Start / End IP Address Empty Enter the start / end IP address of you wants pass through. Subscriber IP/MAC Address or LAN Device Pass Through Start / End IP Address Empty Enter the start / end IP address of you wants pass through. IP Address Empty Enter the IP address of you wants pass through. Subnet Mask Empty Enter the subnet mask of you wants pass through. MAC Address Empty Enter the MAC address of you wants pass through.
WG‐500P Hotspot in a Printer 3‐2‐4‐2 Filtering Filtering allows the system administrator to have a list of restricted destinations, which is useful to block specified Internet websites or Intranet areas. Figure 3‐2‐27 Filtering Setting Screen Item Default Description Filtering Disable Enables or disables filtering function. HTTP Message to display The Web Site is Enter the http message. The maximum character of the HTTP when a website is blocked blocked by System message is 200.
