C6100 User Manual
Accessory List Item Quantity Unit Type-c cable 1 pc Power Adapter 1 pc Battery 1 pc Illustration of equipment
①F1 ②F2 indicator ③Volume ④Reserved Button ⑤USB port ⑧Receiver ⑨Front Camera Grip Button ⑮Rear Camera ⑩Reserved Button ⑯Flashlight ⑰UHF Shield Pin Connector ⑳UHF Shield Metal Housing ㉑Pistol Grip ⑥Blue Led Indicator ⑪Power Button ⑫F3 ⑦Red LED ⑬F4 ⑭Pistol ⑱Barcode Scan Window ⑲Cradle Pogo Power on/off instructions Power on: Press and hold the power button in the off state until the device sends out vibration feedback.
Positioning: GPS/Beidou Optional functions Battery Usage 1. It is forbidden to disassemble the battery cells under any circumstances. 2. It is forbidden to immerse the battery in liquid to prevent moisture. 3. It is forbidden to charge, use or place the battery near heat sources, such as fire, heater, etc., or under high temperature (such as strong sunlight or very hot cars), otherwise it will cause overheating and fire or shorten the life. It is forbidden to directly solder the battery. 4.
the power adapter to power the charging station. Optional Function Instructions 1. QR code Refer to the built-in demo of the device. If the customer needs secondary development, please contact the technical support engineer; the QR code can scan the barcode of the mainstream symbology, but please pay attention to the clarity of the barcode. 2. High frequency (13.56MHz) Refer to the built-in demo of the device, if you need secondary development, please contact the technical support engineer 3.
a. If this service is not activated or the local network provider does not support the service, please contact the designated repairer, dealer or network operator CE Warning 1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2. The product shall only be connected to a USB interface of version USB2.0 or higher. 3. Adapter shall be installed near the equipment and shall be easily accessible. 4.