2013 NX1‐UMTS Quick Guide V1.
Technical Specifications Model and System Model:NX1-UMTS System:Android 4.0.4 CPU and capacity CPU:TI 1GHz dual core OMAP4430 Memory:2GB iNAND (SDIN5D1) 512MB DDR2 SDRAM (EDB816B3PF-8D), upgradable to 1GB. Camera 5M pixels CMOS color camera with MIPI interface. Battery Type:Li-Ion Capacity:1530mAh Type:Li-Ion Capacity:3060mAh Show Screen Size:4" Resolution:800 x 480 Type:Capacitive Wireless Communications Bluetooth:V2.1 EDR WLAN GPS aGPS, geotagging support BitaTek Co. Ltd.
OVERVIEW USB cover:USB rubber cover must completely pushed to meet IP67 standards Headphone cover:Headphone rubber cover must completely pushed to meet IP67 standards Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. :Return to the previous work BitaTek Co. Ltd.
:Return to the desktop :Long press , there will be a directory listing Preparation before using your phone You need to insert a SIM card provided by your mobile operator to use mobile services. As shown, install SIM / memory card and battery. Step 1:Open the back cover Micro SD card installation SIM card inserting Step 2:Insert the SIM card and micro SD card. (Docking Connector is on down side) 1530mAh Step 3:Install the Battery. BitaTek Co. Ltd.
1530mAh Step 4:Install the back cover. Do not open the phone insert or remove a SIM card. Doing so may be the SIM card or the phone cause permanent damage. Press battery cover must get click sound to ensure IP67 BitaTek Co. Ltd.
Battery Charging Method 1:Using the supplied power adapter and USB cable to connect the phone to a power outlet . Method 2:Use a computer to charge the battery. Method 3:Keep this logo on top side and then Insert the micro USB Method 4:Charging eight hours for 1st time use empty battery Low power Positive charging is completed 1. The operating temperature is from -20℃~ 60℃ for NX1-UMTS. 2. The charging temperature is from 0℃~ 40℃. BitaTek Co. Ltd.
NX1-UMTS Regulatory Information ****************************************************************************** CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public.
**************************************************************************************************************************** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.