NAUTIZ X2 QUICK START GUIDE Mobile Computer
1 WHAT´S IN THE BOX The pictures shown below may differ from the actual products. To purchase additional or optional products, contact our customer center.
2 YOUR NAUTIZ X2 LED Receiver Scanner LED 2 Power button Volume up Side scanner button Touch screen display Back Scan Task manager Home Barcode scanner window Flash Camera Batterylock Battery Volume down Side scanner button
3 INSERT/REMOVE BATTERY To insert the battery 1. Insert the battery. 2. Slide the battery lock to the right. Battery door lock To remove the battery 1. Slide the battery lock to the left. Battery door unlock 2. Remove the battery.
4 INSERTING/EXTRACTING SIM/MICRO SD CARD This is how you insert and remove the SIM/micro SD.
5 USING SCANNERUSING SCAN Press the [Front Scan] or [Side Scan] button to start scanning. 2 Scanning Barcode To scan a barcode, keep a distance of about 10 cm between the barcode and the barcode scanner window and scan the barcode at the correct angle.
6 POWERING ON/OFF Press the [Power] button to turn the Nautiz X2 unit on/off. Power button 7 BATTERY CHARGING Use supplied power adapter or charging dock to charge the Nautiz X2. Please go to www.handheldgroup.com/knowledgebase to download more information.
WIFI Operation Frequency: Maximum Power: 5.8G SRD Operation Frequency: Maximum Power: BT Operation Frequency: Maximum Power: NFC Operation Frequency: Maximum Power: GSM Operation Frequency: Maximum Power: WCDMA Operation Frequency: Maximum Power (WCDMA Band 1) Maximum Power (WCDMA Band 8): LTE 2.4G WiFi:2412MHz~2472MHz 5G WiFi Band 1: 5180MHz ~ 5240MHz 5G WiFi Band 2: 5260MHz ~ 5320MHz 2.4GHz WiFi: 17.67dBm(E.I.R.P.) 5GHz WiFi Band 1:16.76dBm(E.I.R.P.) 5GHz WiFi Band 2:16.93dBm(E.I.R.P.
FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
Manufacturer: Handheld Group AB Address of Manufacturer: Kinnegatan 17 A S-531 33 Lidköping Sweden 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.Adapter shall be installed near the equipment and shall be easily accessible. 3.The product shall only be connected to a USB interface of version USB 2.0. 4.4.The operating temperature of the EUT can’t exceed 40℃ and shouldn’t be lower than -10℃. 5.
IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.