NAUTIZ X2 User Manual
Contents 1 Introduction ................................................................................................................................... 1 1.1 Appearance of NAUTIZ X2 ..................................................................................................................... 1 1.2 Installing the Battery ................................................................................................................................ 2 1.3 Removing the Battery .......................
NAUTIZ X2 User Manual 1 Introduction 1.
NAUTIZ X2 User Manual 1.2 Installing the Battery 1. Push the battery to the bottom of the battery compartment and press it downwards. 2. Push the battery cover lock to the right to lock the battery cover. 1.3 Removing the Battery 1. Push the battery cover lock to the left. 2. Pull up the battery cover from the groove at the upper end of the battery cover. (Note: The NAUTIZ X2 adapts integrated design for the battery and battery cover.) 1.4 Inserting a SIM Card 1.
NAUTIZ X2 User Manual 1.5 Inserting a TF Card 1. Push the card cover by following the OPEN direction marked on the card cover. 2. Open the card cover upwards and insert a TF card, as shown in the figure below. 3. Close the card cover, as shown in the figure below. 4. Pull back the card cover by following the LOCK direction marked on the card cover. (Note: TF cads, namely Micro SD cards, are applicable to the NAUTIZ X2. After replacing a TF card, restart the NAUTIZ X2.
NAUTIZ X2 User Manual 1.6 Charging You can charge a battery in the following ways: 1. Bottom charging cable; 2. 1-slot charging & communication stand (to be purchased separately). Description of charging indicator: When the battery is in the charging status, the charging indicator is in red. When the battery is fully charged, the charging indicator is in green. When the battery volume is low, (1) a message indicating that the battery volume is less than 20% is displayed on the screen.
NAUTIZ X2 User Manual 2 Using the NAUTIZ X2 2.1 Powering On/Off the NAUTIZ X2 After installing a SIM card and a battery and charging the NAUTIZ X2 completely, you can use the NAUTIZ X2. 1. To power on the NAUTIZ X2, press the On/Off key on the right for some time. The NAUTIZ X2 vibrates, displays the startup screen and enters the Android OS after the guide progress is complete. It takes some time for the NAUTIZ X2 to initialize. Please wait patiently. 2.
NAUTIZ X2 User Manual Return key Scan key Menu key Home key 2.4 Home Screen By default, the NAUTIZ X2 has one home screen. You can add home screens by placing applications to the home screen and slide to the left or right to switch to another home screen. On the home screen, click the icon of any application to open the application. Application tray ★ Tips You can freely add or delete the icon of an application in the blank of the home screen.
NAUTIZ X2 User Manual Table 2-1 Status icons Icon Description Icon Description WLAN Signal strength Bluetooth Flight mode USB connection Network access restricted Missed calls USB debugging New messages Charging Modem logs Battery full Silent mode Multiple notification icons, which are beyond the scope of display Application permission EDGE Connection between USB and PC pea pod ★ Note As software is upgraded continuously, status indicators may be different from those displayed on th
NAUTIZ X2 User Manual 2. Select Settings > Date & time > Set date or Set time. 2.6.2 Display Setting 1. Find the following icon. 2. Select Settings > Display > Lock screen notification/Wallpaper/Brightness/Auto-rotate screen/Sleep/Interactive screensaver/Font size/Cast screen.
NAUTIZ X2 User Manual 2.6.3 Ringtone Setting 1. Find the following icon. 2. Select Settings > Audio profiles > General/Silent/Meeting/Outdoor. Click different modes and set the ringtone in the modes. 2.6.4 Security Setting 1. Find the following icon. 2. Select Settings > Backup & reset > Factory data reset. The NAUTIZ X2 starts to restore factory settings.
NAUTIZ X2 User Manual ★ Caution If you perform the preceding operation, the following data will be cleared: Account Data and settings of the system and applications Downloaded applications The following data will not be cleared: Current system software and bound applications Files in the SD card, for example, music and photos 2.6.5 Language and Input Method Setting 1. Find the following icon. 2.
NAUTIZ X2 User Manual 2.6.6 Shortcuts You can add shortcut icons on the home screen of the NAUTIZ X2. On the home screen, click the icon of application tray, press and hold an icon and drag it to the home screen. 2.6.7 Widgets You can add widgets such as clock, music player and calendar on the home screen of the NAUTIZ X2. On the home screen, press and hold a blank space. The entry for setting wallpaper and widgets is displayed. Click a widget and drag it to a blank space.
NAUTIZ X2 User Manual 3 Call Function 3.1 Making a Call 1. Find the following icon. 2. Enter a phone number. 3. Click to make a call. 4. Click to terminate the call. Call records Voice call Keypad for dialing Contacts 3.2 Contacts 1. Find the following icon. 2. 3. 4. 5. Click Contacts to open the list of contacts. To add a contact, click . To import or export contacts, press the menu key and click Import/Export.
NAUTIZ X2 User Manual 3.3 SMS and MMS 1. Find the following icon. 2. Click enter a receiver and text to be sent. 3. Click to send the message. 4. On the message editing page, press the menu key, click Add subject to convert the message into a multimedia message. After editing the message, click to send the message. ★ Tips Click to add attachments such as photo, video and audio.
NAUTIZ X2 User Manual 3.4 Email You can send or receive emails. ★ Note To create an email account on the NAUTIZ X2, first set the account on a PC. Take a QQ email account as an example. Log in to the QQ email account, click Settings in the upper right corner of the email account page, find and select the server option and inbox option and then save. The email account is set. To set an email account on the NAUTIZ X2, do as follows: 1. Find the following icon. 2.
NAUTIZ X2 User Manual To synchronize or delete an account, do as follows: 1. On the home screen, click Settings. 2. Under the ACCOUNTS option, click POP3 to open added accounts and click the name of an account to be synchronized or deleted. On the Sync page, click in the upper right corner and select Sync now or Remove account.
NAUTIZ X2 User Manual 4 Network Connection and Connection Synchronization 4.1 GPRS Data Connection After a GPRS data connection is established, you can access the Internet. To establish a GPRS data connection, ensure that a SIM card is installed in the NAUTIZ X2. In general, the Internet access configuration is set on the NAUTIZ X2. If you delete the default configuration by accident, you can set the network by performing the following steps (take the network of China Unicom as the example): 1.
NAUTIZ X2 User Manual 4.2 Wi-Fi Network Connection 1. Find the following icon. 2. Select Settings > WIRELESS & NETWORKS > WLAN. 3. Click Enable/disable WLAN. The NAUTIZ X2 starts to search for networks. If WLAN is enabled, click Scan. The NAUTIZ X2 lists networks in the range of search. 4. Click a network and enter the password in the dialog box that is displayed. 5. Click Connect. The Wi-Fi connection is completed. Click to enable Wi-Fi and search for networks Click to connect the network 4.
NAUTIZ X2 User Manual 5. In the dialog box that is displayed, confirm the PIN and click Pair to connect the device. Click to make other devices able to detect the device Click to enable Bluetooth and search for Bluetooth devices 6. Click on the right of a paired device. The Rename, Unpair and Internet access options are displayed. Perform operation as required.
NAUTIZ X2 User Manual ★ Caution Ensure that the device to be connected to the NAUTIZ X2 has enabled the Bluetooth function and Bluetooth visibility. During the connection process, set and pair the PIN. The NAUTIZ X2 does not support connection without a password. 4.4 GPS The NAUTIZ X2 is equipped with a high-performance navigation chip and can quickly and accurately obtain position information. iData provides a GPS positioning demonstration program GPS Test.
NAUTIZ X2 User Manual Click the option to open the USB storage device and copy files between the PC and the device 4.6 Synchronization 1. Find the following icon. 2. Select Settings > Accounts & sync. 3. Click Add account to set a new account. 4. Select Company or Email, enter the email address and password, click Next and wait until the connection is complete (for details about email setting, see 3.4 “Email”). 5. Click Accounts. On the synchronization setting page, perform setting as required.
NAUTIZ X2 User Manual 5 Enabling the Scan Function 5.1 To start the iScan program and enable scanning, do as follows: 1. Click the iScan icon on the menu page. 2. Click the blue slider on the right of Enable Barcode Scanning to enable the scanning function (if you click the slider again, the scanning function is disabled). 3. Press the yellow key to scan a barcode. When the scanning indicator becomes green from red and a beep is heard, the barcode is scanned successfully.
NAUTIZ X2 User Manual 6 Enabling the NFC Function 6.1 To enable the NFC function, do as follows 1. Click the Settings icon on the menu page. 2. Select WIRELESS & NETWORKS/More > NFC. 3. Click the blue slider on the right to enable NFC (if you click the blue slider again, NFC is disabled). 4. Put an NFC card close to the back of the NAUTIZ X2. After a beep is heard, the card is read successfully.
NAUTIZ X2 User Manual 7 Managing the NAUTIZ X2 7.1 Installing Applications The NAUTIZ X2 uses Google Android OS, where the suffix of Android software is apk. To install programs on the NAUTIZ X2, use the following methods: 1. Download software at the online software store (Google Play) provided by Google or on the Android software download platform (HiMarket) available in China and install software. HiMarket is recommended. 2.
NAUTIZ X2 User Manual 7.3 Managing Applications Select Settings > App. On the application management screen, you can view application status in the options such as Downloaded, SD Card and Running, click an application, access the application information screen, and perform operations such as forcibly stopping, uninstalling and stopping an application.
NAUTIZ X2 User Manual 8 Precautions and Troubleshooting 8.1 Precautions To ensure that the NAUTIZ X2 does not fail, follow the following precautions during use of the NAUTIZ X2: Put the NAUTIZ X2 and its components and accessories in the places where children cannot reach. Keep the NAUTIZ X2 dry. Rain, moisture and liquid contain acidic materials and will corrode the circuit board. Do not store or use the NAUTIZ X2 in dusty or dirty places. Do not store the NAUTIZ X2 in a place that is too hot.
NAUTIZ X2 User Manual Do not put the battery into a fire. If the battery leaks, do not let the liquid stain your skin or eyes. Otherwise, wash your skin or eyes with lots of water and go to see the doctor immediately. Cleaning NAUTIZ X2 Shell Clean the shell by using a cloth soaked with alcohol, including keys and space between keys. Display screen You can clean the display screen by using a cloth soaked with alcohol. Do not let the liquid gather around the screen.
NAUTIZ X2 User Manual Fault Cause Solution low speed. the NAUTIZ X2. necessary, save the records on the host or increase the storage capacity by using an SD card. Too many applications are installed on the NAUTIZ X2. Remove applications NAUTIZ X2. The scan application is not loaded. Load the scan application in the NAUTIZ X2. Reading a barcode fails. Check that the barcode is indefective. The battery volume is low.
NAUTIZ X2 User Manual Table 8-2 Bluetooth troubleshooting Fault Cause Solution The NAUTIZ X2 system is too far away from other Bluetooth devices. Move the NAUTIZ X2 close to other Bluetooth devices, making the distance between them within 10 meters. The Bluetooth devices nearby are not enabled. Enable the Bluetooth devices you are searching for. Bluetooth devices are in a mode that cannot be detected. Set Bluetooth devices in a mode that can be detected.
NAUTIZ X2 User Manual Appendix Table 1 Accessories of the NAUTIZ X2 Component Description NAUTIZ X2 Standard battery Power adapter Used to charge the battery. Bottom charging cable Hand strap Package Used to communicate with the NAUTIZ X2 or charge the NAUTIZ X2. USB data cable Instructions Warranty card One-slot USB charging base Optional Silicon protective sleeve Optional Table 2 Technical specifications of the NAUTIZ X2 Item NAUTIZ X2 System configuration CPU High-performance quad-core 1.
NAUTIZ X2 User Manual Item NAUTIZ X2 Europe: GSM - Quad band support (Band 5/8/3/2) UMTS Primary bands 1/8. Roaming bands 2/5. LTE Bands 1/3/7/8/20 Wireless WAN (Data service) GPRS/ EDGE/WCDMA(HSPA+)/ FDD-LTE Wireless LAN Wi-Fi 802.11a/b/g/n（Dual-band Wi-Fi: 2.4G+5G） Bluetooth Bluetooth 4.0 GPS (optional) Supporting GPS/AGPS/Glonass Operating environment Development tool Android SDK+JDK+Eclipse Supported language Java Operating Temp. -10℃ ~ 50℃ (14℉ to 122℉) Storage Temp.
NAUTIZ X2 User Manual Power Adapter: 1.Manufacturer: SHENZHEN FUJIA APPLIANCE CO.,LTD. Model: FJ-SW1260502000UN Input: AC 100-240V; 50/60Hz;0.4Amax Output: DC5.0V;2000mA 2.Manufacturer: SHENZHEN FUJIA APPLIANCE CO.,LTD. Model: FJ-SW1202000N Input: AC 100-240V; 50/60Hz;0.6Amax Output: DC12.0V;2000mA Battery: Manufacturer:HANDHELD GROUP AB Model: 1ICP9/65/85 Capacity:3300 mAh 12.2Wh Nominal Voltage:DC 3.7V Maximum Charge Voltage:DC 2.
© 2015 Handheld Group AB. All Rights Reserved. This document is prepared by Handheld Group AB according to the existing information. The content in this document is subject to update without notice. Without written approval of Handheld Group AB, no one shall copy, extract, back up, modify, spread, or translate any part of this document in any form or method or use the whole or part of this document for business purposes. If you have any question, you are free to send an email to www.handheldgroup.com.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
