CC61 7 inch Handheld Tablet PC Quick Start Guide Version: 1.
CC61 Accessory Item Description Note 2 piece of 2 Cell Li-Polymer Battery Pack Hot-swappable for battery change 1 piece of Rugged Tablet PC Users Manual. 1 piece of CD for System Driver Utility. 1 piece of 12V Adapter w/ Standard Power Cord. Euro / U.S. Std type, 1.8m Operation System Packing List Item User’s Manual Description Note 1 piece of CD for Recovery CD for Operation System (Windows 7 or Windows XP embedded).
CC61 Copyright Notice Copyright © 2010 Handheld Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Handheld Inc.
CC61 For example, the serial number 1W10Axxxxxxxx means October of year 2010. Customer Service We provide service guide for any problem as follow steps:First, visit the website at www.handheldgroup.com to find the update information about the product. Secondly, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance.
CC61 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not connect the electronic device with power socket while the device’s power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the Pac’s chassis mechanical housing. Caution! Always ground yourself to remove any static charge before touch the CPU card.
CC61 UL Safety Announcement UL Classification: Class I mark: with respect to electronic shock; Fire and hazardous material only in accordance with the regulation of UL-60950 and CAN/CSA C22.2 No. 601.1. Power Supply Announcement The Handheld Rugged Tablet PC Power Supplies are supported by Power Adapter and Battery Pack, the power rating announcement and manufacturer information list as below. Power Adapter Manufacture: EDAC Power Electronics Co Ltd Model: EA1050C-120 Input Rated: 100-240Vac, 1.
CC61 Battery Notice! WARNING Do not fix or replace battery, it may cause explosion! Only use with specified battery by following the manufacturer’s user manual’s instruction. FCC regulatory statements, notices and warning IMPOTANT SAR INFORMATION Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the FCC of USA.
CC61 is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna.
CC61 Contents CHAPTER 1 SPECIFICATION ...................................................................... 10 1.1 SYSTEM SPECIFICATION .................................................................................................... 12 1.2 HOW TO USE THE TABLET PC ............................................................................................ 13 1.3 LED INDICATOR ................................................................................................................ 14 1.
CC61 CHAPTER 1 Specification User’s Manual 10
CC61 This User Manual cover the use of an CC61 with Microsoft Windows 7 OS, but other operating systems can also be used. Please contact your supplier for further information. The CC61 is a compact high performance, low weight rugged Tablet PC designed for outdoor fieldwork purpose. The CC61 can survive in severe environmental conditions including vibration, shock, moisture and temperature variations.
CC61 This Chapter introduces the 7” Handheld Tablet PC CC61 specification. 1.1 System Specification System Processor Intel® ATOM™ Z530 BIOS AMI System BIOS Chipset Intel US15W Memory 1 x SODIMM, Max 2GB DDR2 400/533 (Default 512MB) LAN Controller Realtek RTL811B Chipset, 10/100/1000 Mbps Storage PATA interface support Mini-PCIe interface SSD or 1.8” SSD (Default 32GB) Audio Audio out for headset, Micro-in for microphone jack,1.
CC61 1.2 How to Use the Tablet PC This section describes how to control this Tablet PC. Components Function Description 1 Power On Button PUSH 4 seconds to turn on the tablet pc 2 LED Indicator Shows the Power Status, HDD Status, Left and Right Battery Status, and Wireless Status 3 Menu Push Menu function to show Brightness, Volume,Battery status and Wireless Enable/Disable.
CC61 1.3 LED Indicator LED Term Power mode Indicator Status Description Green: System Turn On.
1.4 Using the Battery Packs This section describes the details of using the battery packs. Using the Battery Packs Before you use your Handheld tablet PC on the road, you will have to charge the battery packs, the battery packs begins to charge as soon as the Handheld tablet PC is connected with the external power source. Please fully charge the batteries before using them in the first time. The new battery packs must 100% charged before the Handheld tablet PC is disconnected with the external power source.
CC61 Insert the battery pack Step 1 Insert the battery pack into the battery slot. Step 2 Press down the compression lock into the tablet pc.
CC61 To remove the Battery Step 1 Press the latch up to loose the battery pack on the tablet PC Step 2 Press up the compression lock from the tablet pc. Step 3 Take the battery pack from the battery slot.
CC61 1.5 The Battery Light Signal Instruction 1. The two battery packs charging procedure. When the tablet pc is connected with the power source, the battery packs are starting to charge. A. Battery Charging Mechanism: 1. The battery packs are both at low power level a. If first battery’s power level is higher the second battery than 10%, the PC will charge the second battery first. b. If both batteries’ power level differences are lower than 10%, the PC will charge two batteries at the same time. 2.
CC61 B. Battery Discharging Mechanism: 1. If the battery on the right is full charged (>3%), the PC will select the right one as the power source. 2. If the battery on the left is full charged (>3%), the PC will select the left one as the power source. 3. If the both batteries are full charged, long push the F3 hot tab to switch the battery power source. 4. When the battery’s power level is under 3%, the PC will automatically switch the power source to the other battery. 5.
CC61 CHAPTER 2 Software Operation This Chapter will guide you how to operate the Tablet PC, including start / stop the PC, and how to use menu function including basic hardware function adjustment and the Hot Tab hotkey utility software that is very easy & helpful for operating the computer. 2.1 Turning On and Off the Tablet PC 2.1.1 Turn on the Tablet PC 1. Place your tablet PC on a flat and stable surface or hold the tablet PC on your hand. 2.
CC61 2.2 How to use the software utility Hot-Tab Hotkey Function PUSH Menu Function Description 1st Time Show Current Brightness 2nd Time Show current Volume 3rd Time Show current Battery Usage and Two BTR status 90 % 4th Time Show current on/off of Wireless mode 5th Time Show software version for a. Hot TAB Utility version b. BIOS / EC version Click “Left/ Down” button to increase brightness (Or Drag by Touch) Click ”OK” to confirm and eliminate UI.
CC61 2.3 Hot TAB Software Utility Functions 1. F1 Hot TAB functions will show four functions A. The first is virtual mouse B. Screen rotation C.
CC61 D. Handwriting(Optional) E. F2 to F3 functional Hot key You can use “Browse” and choose the execution program file. 2.
CC61 3. System Information When you press menu 3rd time, you can see the system information. 4.