Chapter 3 Installing the Device Driver User’s Manual 41
CHAPTER 3 Installing the device driver Through Chapter 3 to go further for A7 driver installation guide, you can easily install all related drivers if without operation system by yourself. The default system will include operation system and you do need to install any of drivers at first time use. 3.1 Chipset Driver Installation 1. Open the file document “Chipset” from C:\drivers folder. 2. Click on “infinst_ auto” to install driver.
. Click on “Next“ to install driver. 4.
5. Click on “Next“ to install driver.
6. Click on “Yes, I want to restart this computer now“ to go on.
3.2 Graphic Driver Installation The system is equipped with Intel NM10 Chipset. The Intel Graphic Drivers should be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions below to complete the installation. You will quickly complete the installation. 1. Open the file document “Graphic “from C:\drivers folder. 2. “Setup.exe” to execute the setup.
3. Click on “Next “to install Driver.
4. Click on “Yes, I want to restart this computer now“ to go on.
3.3 Audio Driver Installation The system is equipped with the Realtek ALC886 HD Audio Codec designed for PC multimedia systems, including host/soft audio and AMR/CNR‐based designs. 1. Open the file document “Audio” and click on “Vista_Win7_R260.exe” from C:\drivers folder to execute the setup.
2. Click on “Next“ to install driver.
3. Click on “Yes, to continue the installation and then click on” Yes, I want to restart my computer now” to finish installation.
3.4 LAN Driver Installation Follow the steps below to complete the installation of the LAN drivers. You will quickly complete the installation. 1. In the Device Manager menu, select LAN device, and right click select update driver 2. Open the file document “LAN”.
3. Select the correct file in the document and click on open to execute the setup.
3.5 HotTab Utility Installation With our HotTab software application utility, user can very easy to control and program their usual hotkey for help their job. 1. Open the file document “Hot TAB” from C:\drivers folder. Press the Setup.exe to execute the installation program. 2. Click on “Setup.exe” to start to the installation.
3. Click “Close” to finish the installation.
3.6 HotTab Driver Installation Following the step by step to finish the driver installation 1. Open the file document Win IO Driver” from C:\drivers folder. Press the Install.bat to execute the installation program. 2. Press any key to complete the driver installation.
3.7 Wireless LAN Driver Installation Following the step by step to finish the driver installation Step.1 Insert the Driver Utility DVD. Open the file document “Wireless”. Execute “Autorun” to start the installation program. Step.2 Follow the step by step and click “Next” to start the driver installation.
Step.3 Check the box then choose “Next”. Step.4 Choose “Typical”.
Step.5 Press “lnstall” to start the driver installation. Step.6 Press “Finish” to complete the driver installation.
3.8 Bluetooth Driver Installation. Following the step by step to finish the driver installation Step.1 Insert the Driver Utility DVD. Open the file document “Bluetooth”. Press “Autorun” to execute the installation program. Step.2 Follow the step by step and click “Next” to start the driver installation.
Step.3 Press “Finish” to complete the driver installation 3.9 WWAN Module Driver Installations Following the step by step to finish the driver installation 1. Open the file document “WWAN” from C:\drivers folder. Press “SWIQMISetup.exe” to execute the installation program.
2. Press “Finish” to complete the installation .
3.10 AirCard Watcher Installations Following the step by step to finish the Aircard Watcher installation 1. Open the file document “Watcher_GobiAnywhere” from C:\drivers folder. Press “Watcher_Generic.msi” to execute the installation program. 2. Select the “Next” to next step.
3. Press “Next’ to install the driver. 4. Click “Finish” to complete the installation.
3.11 GPS Driver Installations Following the step by step to finish the driver installation 1. Open the file document “GPS”. Press “ublox_A4_U5_USB_drv3264win7_install_UI.exe” to execute the installation program. 2. Select the “English” and click the “ok” to next step.
3. Press “Next’ to install the driver. 4. Press “I Agree” to install the driver.
User’s Manual 67
5. Click “Finish” to complete the installation.
3.12 U-Center Installations Following the step by step to finish the U‐Center installation 1. Open the file document “/GPS/u‐center 7.00”. Press “u‐center.msi” to execute the installation program. 2. “Next’ to install the program.
User’s Manual 70
3. Click “Finish” to complete the installation.
Chapter 4 Caring Your Tablet PC User’s Manual 72
CHAPTER 4 Caring your tablet pc 4.1 Battery Protection Tips It is recommended temperature range for charging the battery pack between -5℃ ~ 35 ℃. To avoid harm to the battery, recharge the battery pack when it is nearly discharged. When recharging, make sure that the battery pack is fully charged.
4.2 Touch screen Protection Tips Avoid using excessive force to the display, when use the finger or the included touch screen stylus pen on the display, the recommended force can not over 200gf. Besides the included stylus, using a sharp or metallic object may cause scratches and damage the display, thereby causing errors. Wipe the touch screen with a clean, soft, lint-free cloth. Using the touch screen during low temperature (less than 5 ℃) may cause a slower response time, this is normal.
4.3 Trouble shooting from A to L A. Battery Problem Condition Check Point The battery does not charge Make sure that the AC adapter is properly (Battery Charge indicator connected. does not light orange. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. B.
E. SSD Problem Condition The SSD error message appears on the screen. Check Point The SSD has defects. Ask your dealer for help. The SSD operations seem slow. The data files stored on the SSD may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. The SSD indicator glows without blinking. The data files stored on the SSD may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. F.
empty. Do any one of the following: - Connect the AC adapter to the Tablet PC. - Replace the empty battery pack with a fully charged one. H. Startup Problems Condition Check Point When you turn on the Tablet If you are using an external AC power, make PC, it does not respond and sure that the AC adapter is correctly and the Power indicator does not light green. securely connected. If so, make sure that the electrical outlet works properly.
J. Wireless LAN Problem Condition Check Point I cannot use the wireless LAN Make sure that the wireless LAN feature is feature. turned on. Transmission quality is poor. Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point or another wireless LAN device it is associated with. Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.
I cannot access the network. Reconfigure and reset the Access Point. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. User’s Manual You have moved out of range of the network. Turn off power management.
4.4 Appendix A.
