4035-MAN5060 User’s Manual Ver.1.0 Smart Audio Player Model : XD403 HANBiT Electronics Co., Ltd. http://www.hbe.co.
1. Preparations ------------------------------------------------------------ 2 ---------------------------------------------------- 4 Features Safety instruction ---------------------------------------- 5 ---------------------------------------------------- 6 --------------------------------------------------------------- 7 ---------------------------------------- 9 Inserting battery Appearance 2. Drive installation for Windows 98 3.
USB portable memory storage device Worldwide FM Tuner / Recorder LCD back light and 4 line display (4 Line LCD) Firmware upgradeable User friendly navigation design Direct MP3 encoding function: convert external audio files into MP3 files 6 Band 6 EQ / User EQ mode support Adjustable playback speed and repeat function Line-in auto sync.
Don’t try to disassemble and repair the device yourself. Don’t push two buttons at the same time or disjoint the machine. Don’t spray or put water directly on the surface of the device for cleaning. Just smoothly wipe its surface with dry towel. Don’t use chemicals or cleaner as they may damage its surface and color. Don’t drop or put pressure on the device. Keep it away from a magnet or a place with strong vibration Please contact customer service center when the player is wet or dropped in water.
1. Slide the battery cover in the direction of arrow and open it like the picture. 2. Insert battery properly in accordance with the plus (+) and minus (-) directions. 3. Slide the battery cover in the direction of arrow and close it like the picture.
Please install the drive before connecting XD403 to PC. 1. 2. 3. Insert the installation CD into CD-ROM Drive. Select Windows 98 Driver folder in the XDRUM XD403 folder in the CD. Execute Win98Driver_XD403_En.exe in the folder. 4.
5. 6. Restart your Computer (PC) after completing installation. Connect the USB extension cable to PC’s USB port. 7. If you see “USB CONNECTED!” message on LCD screen, it’s successfully connected.
● Press and hold PLAY/STOP button to turn on / off the power. ● Lightly press PLAY/STOP button to play or stop music file. ● Push OK button in the direction of + / - to adjust VOLUME. ● Push OK button to or direction to play next or previous music ● Push and hold PLAY/STOP button to play fast forward or rewind. ● Press OK button on its center to select Music/Menu/Folder ● Press and hold OK button to display Setup Menu when stop playing.
You can easily search songs or folders in MP3 mode by using the NAVIGATION function. To use the NAVIGATION function, lightly press OK button in MP3 mode and search files by pushing the OK button toward plus (+) or minus (-) directions. Then, if you press OK button again, the song you found is selected. After selection, you can enjoy the song by pressing PLAY/STOP button. Press and hold REC/MODE button to display FUNCTION MENU. - Move between menus: pushing OK button to or direction.
To use Repeating track function for folders or songs selected, lightly press REC/MODE button and select Repeating track options one-by-one when MP3 file is in Play or Stop mode. Repeats the whole track in the folder Repeats only one song Stops when all songs in the folder are played Deleting FILE/FOLDER function is only available when Play is stopped (in Stop mode).
Use LOOP REPEATING function when you want to repeat a certain range of file in play. 1. Define Start point of repeat range: define start point (A point) of the repeat range for the music/voice file in play by pressing A-B/EQ button (A is displayed on the LCD screen). 2. Define End point of repeat range: press A-B/ EQ button again at the point where you want to stop REPEAT. (A B will be displayed on LCD screen. The defined range is repeatedly played) 3.
EQ function is only operational when MP3 Mode is in Play or Stop. 1. If you press and hold A-B/EQ button when MP3 Mode is in Play or Stop, EQ will be displayed. If you push the button again and again, the following Timbre will be displayed consecutively. (NORMAL - CLASSIC - LIVE - POP - ROCK - USER EQ) EQ function is only activated when Study Mode of Setup Menu is off. 2.
Play List function allows you to select and play only the songs (up to 10 songs) you want to listen out of songs stored in MP3 Mode. 1. Using the NAVIGATION function of OK button, select files by pushing the button toward +/direction and store files by pressing REC/MODE button 2. Using the NAVIGATION function of OK button, select files by pushing the OK button toward +/- direction and store files by pressing REC/MODE button. 3.
4. To delete a file from PLAY LIST, select the file and press A-B/EQ button and then the file will be deleted from PLAY LIST. 5. How to get out of PLAY LIST: In Play List mode, lightly press REC/MODE button to return to MP3 Stop Mode.
1. Press and hold PLAY/STOP button to turn on the power of the Player If power is not on, check the battery and HOLD switch location. 2. Select music you want to play by using NAVIGATION function. (Please refer to NAVIGATION function in Basic Operation) 3. You can play the music by pressing PLAY/STOP button after selecting the music. 4. While a music file is in PLAY, if you want to go back to previous music, lightly push OK button to direction, or to direction if you want to move to Next music. 5.
1. Press and hold REC/MODE button to display Function Selection screen. Lightly push the OK button to the left or right to select FM RADIO. 2. Select channels (frequency) by lightly pushing OK button to or direction. If you want to use AUTOSCAN, press and hold OK button to or direction when PRESET is released. 3. After finding the channel you want, if you want to save the Radio channel, lightly press AB/EQ button.
4. If you want to search for the channels stored, lightly press the OK button to enter PRESET mode. After that, select a channel stored by lightly pressing OK button to or direction. 5. If you want to find and save channels using AUTOSCAN: Upon pressing and holding OK button in PRESET mode, “AUTOSCAN START” will be displayed on LCD screen and channels will be automatically scanned and stored. When channel saving is completed, the message of “COMPLETE” will be displayed on LCD screen.
1. While listening to the FM Radio, lightly press REC/MODE button to start recording. Please note that recording is not allowed in PRESET mode. 2. Lightly press PLAY/STOP button to finish recording. . 3. To suspend recording for some moment, lightly press the REC/MODE button. 4. To play the recorded file, go back to MP3 mode and press the OK button to enter into RECORD folder and play it. In that case, the recorded files will be in RADIO***.MP3 file format in the RECORD folder of the PLAYER.
1. Press and hold REC/MODE button to move to Function Menu 2. After selecting VOICE by lightly pushing the OK button to or direction, press the OK button. 3. Upon selection, the Player becomes Voice Recording Ready mode. 4. Lightly press REC/MODE button to start recording. 5. To suspend recording, lightly press REC/MODE button again. 6. To stop and save recording, lightly press PLAY/STOP button. 7. To play recorded files, go back to MP3 mode and press OK button to go into the VOICE folder.
1. This function allows you to record an audio signal from external audio device or PC. Connect external device to the Player using the enclosed audio cable as shown below. 2. Press and hold REC/MODE button to display Function Selection screen. Push OK button to or direction to select LINE-IN, and press the OK button. 3. Upon selection, the Player becomes Recording ready mode.
4. To start recording, lightly press REC/MODE button. 5. To suspend recording, lightly press REC/MODE button again. 6. To stop and save recording, lightly press the PLAY/STOP button. Recorded files are saved as REC***.MP3 format under RECORD folder. You can play the files in MP3 mode. You can change the environment for LINE-IN recording in Setup Menu (Refer to Setup Menu).
To adjust various setups of XDRUM AUDIO PLAYER, press and hold the OK button to enter Setup Menu. (When recording is underway or the Player is in Mode Change Menu status, you cannot go into Setup Menu regardless how strongly you press OK button). - Movement between menus: lightly push the OK button to up · down · left · right directions - Menu/Function selection: press and hold OK button. - Function adjustment: lightly push the OK button to or direction.
STUDY : In STUDY MENU, press OK button to select it. Then, STUDY FUNCTION menu will be displayed. If you select YES, STUDY function is activated allowing you to adjust speed of music in MP3 mode but if you select NO, EQ function is provided (Default is NO) In playing MP3 mode, press and hold A-B/EQ button to select the function and press A-B/EQ button to adjust the speed by 6 phases (Normal / Slow1 / Slow2···Slow5).
BAND LIMITS (FM) : it is to setup FM BAND range by country. There are two regions (US/KOR/EUR and JAPANESE). Select JAPANESE in Japan or select US/KOR/EUR in other regions (Default is US/KOR/EUR) Setup Menu GENERAL BAND LIMITS (FM) REGION SELECTION PLAY/STOP button SEARCH STOP LEVEL (FM): it is to define FM reception level. Setting is available in three levels such as LOW, MID and HIGH. The lower the level is, the more sensitive it is in receiving lower frequency.
BACK LIGHT : you can setup the time during which LCD screen light is on by pushing OK button to the left or right. (Default is 5 SEC) Setup Menu DISPLAY BACK LIGHT TIME SETUP PLAY/STOP button LCD CONTRAST : you can adjust contrast of LCD screen by pushing OK button to the left or right. (Default is 6) Setup Menu DISPLAY LCD CONTRAST CONTRAST ADJUST PLAY/STOP button TIME: if you select NORMAL, play time of a song is displayed. If you select REMAIN, remaining play time of a song is displayed.
SLEEP POWER OFF: you can setup timer by pushing OK button to the left or right. When it reaches the time defined, the Player will be automatically turned off. This function is very useful when you want to fall asleep while listening to the music. When the power of the player is off, the initial timer setup will not be effective and it returns to default timer setup (setup is possible up to 300 minutes).
SOUND BALANCE : you can adjust output level of left or right side of earphone or headset by pushing OK button to the left or right direction. (Default is 18) Setup Menu CONTROL SOUND BALANCE PLAY/STOP button SETUP VOICE REC MODE you can select sound quality in voice recording 1. File type setup: voice file selection is available in three types (MP3 / ADPCM / TVF) (Default is MP3) 2. SAMPLING frequency: you can select minimum 8 KHz to maximum 22.5 KHz depending on the file type you selected. (Default is 22.
VOICE DETECTION: 1. When you select MP 3 in VOICE REC MODE as explained above – in voice recording, the Player automatically detects external sound and if voice sound is not detected for a certain time period, the Player automatically suspends recording to save its memory capability thereby allowing longer period voice recording.
FM REC MODE : you can select sound quality in radio recording 1. RECORD mode: you can define it as MONO or STEREO. 2. SAMPLING frequency: setup is possible from 16 KHz to 44.1 KHz. 3. BIT RATE: you can define it from 32Kbps to 224Kbps. (Default is Stereo / 44.1KHZ / 128KBPS) Setup Menu CONTROL FM REC MODE SETUP PLAY/STOP button LINE-IN REC MODE: you can select sound quality in line-in recording. 1.
LINE-IN AUTO SYNC: In case of playing and recording multiple files consecutively from an external audio device through Linein input, it automatically detects silent interval between files. Then it recognizes and records each file separately. Silent interval can be defined from 1 sec. to 10 sec. SYNC OFF : it turns off the audio signal detection function and useful in recording all audio track defined in one file.
Firmware Upgrade For firmware upgrade, press the OK button in FIRMWARE UPGRADE. Select YES and press the OK button again. Then, “FIRMWARE UPGRADE. Not connect!!” message will be displayed on LCD screen. Upon seeing the message, connect the Player to USB CONNECTOR of PC. Then, you can see “Connected” on the LCD screen. Now you can start Firmware Upgrade. (Default is NO) You must install Firmware Upgrade Drive to use Firmware Upgrade.
FORMAT (NORMAL) : it executes NORMAL FORMAT. Be careful in executing format as all stored data will be deleted when format is executed. (Default is NO) Setup Menu SYSTEM FORMAT (NORMAL) SETUP PLAY/STOP button FORMAT (LOW) : It executes LOW FORMAT. In case of LOW FORMAT, it may take some time. (Default is NO) Setup Menu SYSTEM FORMAT (LOW) SETUP PLAY/STOP button Select frequency band you want to adjust by pushing OK button to or direction.
1. Prepare and accommodate following requirements. Acquire a PC (general PC) having USB port MP3 Player (XD403) FIRMWARE UPGRADE execution files (ex: EasyUpdateFirmware.exe) Latest version of FIRMWARE (downloadable via www.hbe.co.kr) FIRMWARE UPGRADE execution files and driver installation files are available in the CD provided in the Product package or in the download bulletin board on our website Before Firmware upgrade, back up important data in XD403 for safety 2.
3. Now, go into Setup Menu in the MP3 player (XD 403) and define the Player as System Firmware Update mode. Connect MP 3 player (XD403) to PC’s USB port as shown in the picture. If you connect MP3 Player (XD403) to PC’s USB port, the message of “FIRMWARE UPGRADE Connected!!” will be displayed on LCD screen.
4. Execute ‘EasyUpdateFirmware.exe’ located in XDRUM XD403 folder in the CD drive (or download it from www.hbe.co.kr). 5. Click Download Application.
6. Click Save when the following window is displayed. 7.
Download is executed as shown in the picture and the zip file is saved in the folder you selected.
8. Unzip the downloaded zip file as shown in the picture. (Use Winzip program) 9.
10. Select the location of Firmware to be updated. 11. Select hex file that is unzipped, and click Open (O) Firmware Upgrade is processed as shown in the following pictures.
12. Click OK to finish the Upgrade. If the program suddenly stops in the middle of Firmware Upgrade procedure, firstly release the XD403 from PC and re-operate EasyUpdateFirmware.exe 13, If you release XD403 from PC after completing Firmware Upgrade, XD403 will be turned off automatically. Then turn on XD403, and execute Format(Normal) operation in the System Setup Menu to use XD403 safely.
HANBiT Electronics supply you with five useful application softwares as shown below. 1. 2. 3. 4. E-MAIL : Enable you to receive and send email on other PC. PC LOCK : Protect from illegal approach by using system lock key TIME LOCK : Limit PC using time to prevent internet addiction FILE LOCK : Hold function for protection document, as well as auto compression and uncompression 5. MY AD : As a POP UP function, showing desired graphic file on the monitor.
Please check the following first when you think there is something wrong with the Player. I cannot turn on the Power. Did you properly insert the battery? Check whether the HOLD switch of the Player is in the lock mode. (If it’s in lock mode, please switch it to the unlock mode) Please check remaining battery fuel gauge. I cannot hear any sound or there is noise in sound. Is the Volume defined as ‘0’? Please check whether your earphone is properly inserted or there is any alien material in the terminal.
Don’t put strong pressure on the Player such as dropping it. The Player may be significantly damaged if you drop it from a higher place or put strong pressure on it with a hard object, but the Player is designed to be resistant to movement or vibration caused by fast walking or exercising. Please keep it away from water. If the Player is wet, significant damages or problems may be caused.
Thank you for purchasing Hanbit’s product. Even though Hanbit has been doing its best to produce quality products, there can be some problems involving our products. If you have any problems in using our product and you need A/S (after sales service), please contact us at the following address. Sorry for the inconveniencies you experience. Customer Service Team address: To Customer service responsible person / Customer Service Team of Sales Division, Hanbit Ltd.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This Device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment.
Product Series HANBIT Electronics Co., Ltd. Address : 414-5 Woncheon-Dong, Youngtong-Gu, Suwon-City, Kyoungki-Do, Korea (Zip 443-823) Telephone : +82 31 218 1915 / Fax : +82 31 217 1926 Home Page : www.hbe.co.kr / E-mail : support@hbe.co.
