USER’S MANUAL Model : HSD329TN Hanbit Electronics Co., Ltd http://www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved Contents 1. Package Contains ------------------ Page 3 2, Locations and Function ------------------ Page 3 3, XDRUM N Stick ------------------ Page 4 * Key lock ------------------ Page 6 4, Windows98 Install ------------------ Page 7 5, Utility program ------------------ Page 9 * Password Set and Change ------------------ Page 11 * Boot Up function ------------------ Page 13 6, USB2.
Hanbit Electronics Co.,Ltd. All rights reserved ■ Package Contains 1. USB2.0 XDRUM N Stick 1pcs 2. USB extension cable 1pcs(option) 3. Neck strap 1pcs(option) ※ ■ 4. Extra cap 1pcs(option) 5. CD Drive 1pcs(option) 6.
Hanbit Electronics Co.,Ltd. All rights reserved ■ How to Use the USB2.0 XDRUM N Stick You can use the USB2.0 XDRUM N Stick right away simply by inserting it in the USB port of your PC. (WindowsME/2000/XP and beyond, excluding Windows98/SE, will automatically recognize the USB2.0 XDRUM N Stick) For users with Windows98/SE O/S, the Windows98/SE driver must first be installed. Please refer to page 7 for driver installation.
Hanbit Electronics Co.,Ltd. All rights reserved To confirm whether the device is installed properly, choose “ Start-> Settings-> Control Panel-> System-> Hardware”, then double-click on the device manager to display the [Universal Serial Bus] icon. Double-click that icon to see if the “ USB mass storage device” is installed. It is recommended to use USB2.0 XDRUM N Stick compatibly with “ Hi-Speed USB 2.0”. If you connect the USB2.0 XDRUM N Stick to a “ non Hi-Speed USB 2.
Hanbit Electronics Co.,Ltd. All rights reserved Note: Whenever you remove a device without executing safe removal, a warning message that the “ computer may stop responding, or you may lose data” will be displayed. Do not remove the device when the LED is flashing since this indicates that reading or writing is active. Remove the device safely after the LED turns off. Write-Protect Function ◈ Write-protect tab is located at the lower part of XDRUM N Stick.
Hanbit Electronics Co.,Ltd. All rights reserved ■ How to Install the USB2.0 XDRUM N Stick with Windows98 1) Double-click and execute “ XDRUM N Stick Win98 Driver2.0. EXE” from the CD, and then choose “ Next” when the “ Installation Manager” file appears as follows. 2) When given options to make a new directory during installation, choose “ Yes” and click “ Next”. Rev.5.0, 2003-09-03 Page 7/7 www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved 3) After the UBS XDRUM N Stick is installed, click “ OK” to finish installation. 4) When the UBS N Stick is connected to a UBS port, the computer will automatically locate software for the new device. Simply find the drive where your UBS N Stick is connected and use it. Rev.5.0, 2003-09-03 Page 8/8 www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved ■ How to Use the XDRUM N Stick Utility Program The XDRUM N Stick provides functions such as password protection, partitioning, and booting setup alteration. How to Install the XDRUM N Stick Utility Program Follow the installation guide: 1. Execute “ XDRUM N Stick.EXE” from the driver CD enclosed with the product. 2. When the Installation Wizard appears, click [Next>]. 3. Installation Wizard begins to copy and install required files and programs.
Hanbit Electronics Co.,Ltd. All rights reserved 4. Clicking on “ OK”, to completes installation of the utility program. 5. Check if the [XDRUM N Stick] folder is displayed in the [program] folder of the [Start] menu. Note: When the “ XDRUM N Stick” is inserted into the USB port, a key-shaped program execution icon will appear in the lower right corner of the startup screen. Click that icon to execute the utility program. Rev.5.0, 2003-09-03 Page 10/10 www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved ■ How to Use the XDRUM N Stick Utility Program Set/Check Password The XDRUM N Stick allows the setting or alteration of a [password]. In order to set a password for the first time, choose “ resize” as displayed in the following picture. If a password is already set, a message will appear advising you to enter that password. If you want to alter the password, follow this procedure. 1.
Hanbit Electronics Co.,Ltd. All rights reserved 3. When you connect the “ XDRUM N Stick” with a password set, a key shape will be displayed in red on the tray bar. 4. To use the XDRUM N Stick after setting the password, enter the appropriate password in the “ password” box, and clock “ OK”. (To quit using secure mode, click “ logout”, then “ OK”, to go to the public area.) Change Password A function of altering the XDRUM N Stick password. First, enter the existing password, and then a new one.
Hanbit Electronics Co.,Ltd. All rights reserved How to Use the Boot Up Function [Copy System File] This function is used to enable you to boot your computer with the USB disk. Choose [Utility], and the following window will pop up. USB Flash Disk supports USB FDD, ZIP or HDD booting functions. However, you can use this function only when your PC’s mainboard supports it. How to Make a Boot Up Floppy for Win XP [Copy System File] 1. Click 3.
Hanbit Electronics Co.,Ltd. All rights reserved 2. Create a new XP_Bootable folder within the C Drive (System Disk), copy all files from 3.5 Floppy disk (A:), and paste them in the new XP_Bootable folder. Note: To copy the system file from 3.5 Floppy disk (A:), set all files and system file as “ view” using folder options as the following picture shows, and then click “ OK” . Rev.5.0, 2003-09-03 Page 14/14 www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved 3. Choose the [Utility] index from the XDRUM N Stick utility, and click “ USB ZIP”, then “ OK”. Note: This function may not be supported depending on the O/S that you use. When your O/S does not support this function, utility index window wont be activated. (available only on Win98/XP) Note: To use this booting function on Win XP, BootDisk folder should be located at C Drive. Note: This function is not supported in Windows ME or Windows 2000.
Hanbit Electronics Co.,Ltd. All rights reserved ■ USB XDRUM N Stick Specification Capacity 16, 32, 64, 128, 256, 512MB Read Performance 56Mbit/sec(Depend on PC mainboard type) Write Performance 48Mbit/sec(Depend on PC mainboard type) Available PC IBM PC/Mac..PC System with USB Port Available O/S Windows 98 / ME / 2000 / XP / Linux 2.4 or higher, Mac OS 9.
Hanbit Electronics Co.,Ltd. All rights reserved ※ How to remove the USB2.0 XDRUM N Stick safely ● All O/S : Unplug the XDRUM N Stick from the USB port after the activating pointer of mouse is stopped. ● Windows 98 : Do not unplug the XDRUM N Stick from the USB port while its LED is blinking. ● Windows ME, 2000,XP : Execute hardware separation icon located on the bottom of the right in the Windows to remove the device safely or unplug it by using hardware wizard on the control pannel.
Hanbit Electronics Co.,Ltd. All rights reserved ※ Customer Service · Website : http://www.hbe.co.kr / e-mail : support@hbe.co.kr · Address : 414-5 Woncheon-Dong, Paldal-Gu, Suwon-City, Kyoungki-Do, Korea Hanbit Electronics Customer Service team · Telephone : +82 31 218 1900 ※ / Fax : +82 31 217 1926 Caution · To use your Data safely, Please make back-up file. Because NAND Flash memory chip has a feature which can write data within 300,000 times.
Hanbit Electronics Co.,Ltd. All rights reserved Regulatory Information FCC Compliance Statement Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Hanbit Electronics Co.,Ltd. All rights reserved two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Marking and European Union Compliance Products intended for sale within the European Union are marked with the CE Mark which indicates compliance to applicable Directives and European Normes (EN), as follows.
Hanbit Electronics Co.,Ltd. All rights reserved Customer Card Product Name: 1Year Limited Warrenty Model: Purchasing Data: Customer: E-mail: Telephone: Address: Warranty Card The product purchased is warranted and tested to be free from defects in material and Workmanship and conform to the published specifications. Hanbit Electronics Co.,Ltd will offer a service for product Malfunction in the conditions as below. 1. Limited Quality Warranty 1) For a period of one year from the date of purchase.
Hanbit Electronics Co.,Ltd. All rights reserved Rev.5.0, 2003-09-03 Page 22/22 www.hbe.co.
Hanbit Electronics Co.,Ltd. All rights reserved Company Registered HANBiT Electronics Co.,Ltd Address : 414-5 Woncheon-Dong, Paldal-Gu, Suwon-City, Kyungki-Do, Korea (ZIP 442-823 ) Telephone : +82 (31) - 218 - 1900 / Facsimile : +82 (31) - 217 -1926 E-mail : support@hbe.co.kr URL : www.hbe.co.kr Rev.5.0, 2003-09-03 Page 23/23 www.hbe.co.
