Mobile Disk User’s Guide HANA Micron Incorporated www.mobiledisk.
Copyright Notice Copyright Reserved. 2003 HANA Micron Inc. The contents of this User Guide and the Installation CD are copyrighted by HANA Micron Inc. Reproduction or modification of thecontents in part or whole without prior authorization by HANA Micron Inc. is strictly prohibited. This product is subject to change without prior notice for the purposes of performance enhancement. The actual installation and usageof the product may be slightly different from the description in this Guide.
Table of Contents 1. Introduction to Mobile Disk .................................................................................4 2. Product Specifications .........................................................................................4 3. Operation and Usage ............................................................................................5 4.1 Installing Manager Program........................................................................6 4.
1. Introduction to Mobile Disk Mobile Disk is a portable data storage device using flash memory, replacing the existing FDD. The capacities vary from 16MB to 1GB, and the physical size of the unit is as small as a little finger. It is an elegant next generation product. Business people who deal with many private documents and presentation files, designers who have to back up graphic files, and students who must submit reports containing various statistics don't have to wrestle with inconvenient 1.
3. Operation and Usage ● General Operations - Install Mobile Disk to the USB port directly or via an extension cable. - You can input/output and edit/delete data right after Mobile Disk is connected to the port. ● The following operating systems do not need driver installation: - Windows ME, Windows 2000, Windows XP, Mac OS 9.0 or higher, Linux Kernel Version 2.4.0 or higher.
4.1 Installing Manager Program 1) Insert the Manager Program CD supplied with the product into the CD ROM drive. 2) The main window of the Manager Program automatically appears as shown below. Image Insertion [Manager Program Selection Window] 3) Select the Manager Program installation menu. The corresponding manager program installation screen appears. Click [Next]. Select a language and click [Next].
4) When the installation is complete, the following message appears. Click OK. 5) “U-Storage” is automatically registered on Programs as shown below. 6) The main window automatically appears as shown below. (Unplug and plug the product for Win98, SE, and ME). 4.2 Installing and Using Secure Feature 1) Changing a Password To change your password for protection of your private information, proceed as follows: Right click on the tray icon at the bottom right of the screen. Right click here.
Select U-Storage. Select "Change Password.” When the following window appears, change the password and click OK. < Be sure to take note of your new password to not forget it.> [Note] If you failed to enter the correct password three times or more, please plug in the device again and try again. If you can’t remember your password, you can use the Hint for help.
2) How to Log in / Log out Log in to move to the security data area. Log out to move to the public area. Logging In Click “Log In.” Enter Password and click OK to enter the secure area. The following screen shows when you have successfully logged in.
How to Log Out Click “Log Out.” When the following screen appears, you have successfully logged out. 3) Resizing With the Resizing feature, you can freely change the sizes of the Security and Public areas. Public Area: You can read and write in this area without logging in. Security Area: You must log in to read and write data in this area. ublic Area + Security Area: The above two areas (Public, Security) can be used simultaneously with 2 drivers.
Ex) When you select Public Area + Security Area, two separate drivers are created.
[Public Area Only] Click “Resize.” Click OK to run Resize. ※ Take special care since if you resize to “Public Area Only,” the security feature disappears. Even if the partition for the Security Area disappears, the Setup.exe file still exists.
[Security Area] Move the bar left or right on the screen to resize it, and then click OK. When the following message appears, click “OK.” The resize is applied. [Public Area + Security Area] Set the sizes for each driver on the screen and click OK.
The following two drivers are created. 4.3 Boot Up Function The Boot Up Function enables the device to perform as a boot disk. (The Main Board must provide USB FDD/HDD/ZIP Bootable features). Read the following before running the program. 1) This program runs on Windows 98 SE, ME, or XP. (Windows2000 is not supported.) 2) Stop the anti-virus program while the program is running. 3) A Window’s system must be installed on the C Disk. 4) This program applies only to one device.
1) As shown in the following picture, click on the Utility button, and then the Boot up button. 2) Select USB HDD or USB ZIP. USB HDD is supported only for Windows 98 SE. → If you select USB HDD, "C:\>" appears after booting. → If you select USB ZIP, "A:\>" appears after booting. 3) Make your selection and click OK. The following warning message appears. 4) When the process is complete, the following message appears.
[Error Messages] The following message appears when the Windows OS was not installed properly. Create a folder (\WINDOWS\COMMAND\EBD in Windows 98, \WINDOWS\COMMAND\EBD in Windows ME, or \XP_Bootable in Windows XP) and copy system files to the folder. The following message appears when the size of the Public Area is insufficient. Increase the size of the Public Area by using the Resize function. [Note] When you carry out the above procedure, the booting files are created on the device.
After running Recover Disk, all the files on the device are deleted. Since the deleted files cannot be recovered, be sure to back up important files before running Recover Disk. 2) When you have checked Read & Write Test, Read/Write tests are performed for each block. It takes approximately 1.5 minutes for 16MB. 3) Click Start. The Low Level Format is started. When the process finishes, the following message appears.
5. Service Guide Service Guide Free of Charge Services: - Services are free for one year after purchase from the Customer Service Center. However, service is charged for the following cases: - When product failure results from an error or carelessness on the customer’s part (damages due to shock or the entry of foreign substances). - When product failure results from a repair or product modification by the customer. - Product damage from natural disasters.
Precautions for Use - Never remove Mobile Disk until the flashing of the LED completely stops. Otherwise, the data may be lost. - In order to safely remove the drive, select Unplug from "Unplug or Eject Hardware" from the Control Panel before removing it. - HANA Micron Inc. does not take responsibility for data loss due to any reason except inherent defect of the product.
U.S. FCC CLASS B NOTICE Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
