Comparison Sheet

HANA - Umami Red, ML, SL, EL Comparison Chart
Umami Red (UR) ML SL EL
(1) Material Duralumin (A7075), Ebony Wood Delrin (Polyoxymethylene) ABS ABS
(2) Finish Gloss Urushi Lacquer/ Red Satin Finish Painted Painted
(3) Cantilever Boron Aluminum Aluminum Aluminum
(4) Stylus Microline Nude Diamond Microline Nude Diamond Shibata Nude Diamond
Synthetic Elliptical
(5) Armature Material Permalloy Permalloy Permalloy Permalloy
(6) Armature Shape Square Cross Cross Cross
(7) Parts Material Pure Iron Pure Iron Pure Iron Pure Iron
(8) Magnet Samarium Cobalt Alnico Alnico Alnico
(9) Terminal Plate PEEK (Polyether Ether Ketone) ABS ABS ABS
(10) Terminal Pin 24K Gold Plated Gold Plated Gold Plated Gold Plated
(11) Coil Impedance
6Ω/1KHz
8Ω/1KHz
30Ω/1KHz 30Ω/1KHz
(12) Output 0.4mv/1KHz 0.4mV/1KHz 0.5mv/1KHz 0.5mv/1KHz
(13) Coil Wire Material High Purity Copper High Purity Copper 4N Copper 4N Copper
(14) Terminating Impedance > 60Ω > 100Ω > 400Ω > 400Ω
(15) Treatment Cryo-genic Yes Yes None None
(16) Frequency Response 10-50,000Hz 12-45,000Hz 15-32,000Hz 15-25,000Hz
(17) Output Balance 0.5dB/1KHz <1dB/1KHz <1.5dB/1KHz <2dB/1KHz
(18) Channel Separation >30dB/1KHz 30dB/1KHz 28dB/1KHz 25dB/1KHz
(19) Tracking Force Weight 2g 2g 2g 2g
(20) Trackability 70μm/2g 70μm/2g 70μm/2g 70μm/2g
(21) Dynamic Compliance 10 x 10(-6) cm/dyne (100Hz) 10 x 10(-6) cm/dyne (100Hz) 10 x 10(-6) cm/dyne (100Hz) 10 x 10(-6) cm/dyne (100Hz)
(22) estimated 16 x 10(-6) cm/dyne (10Hz) 16 x 10(-6) cm/dyne (10Hz) 16 x 10(-6) cm/dyne (10Hz) 16 x 10(-6) cm/dyne (10Hz)
(23) Cartridge Weight 10.5g 9.5g 5g 5g
(26)
Body
Cantilever
Assembly
Magnetic
Circuit
Coil
Specification