Item #1002 726 186, 1002 722 213 Model #91315, 91353 UL model #52-LTM USE AND CARE GUIDE LATHAM 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A G B H C I D J K E L F Part Description M Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C Part Description Quantity G Blade 5 H Blade bracket 5 1 I Blade medallion 5 Canopy with canopy ring attached 1 J Glass bowl 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 K Receiver 1 F Light kit fitter assembly 1 L Remote control (batteries included) 1 M LED Bulb (8.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting Routing the wires □□ Remove the canopy ring (O) from the canopy (C) by turning the □□ □□ □□ Route the wires exiting the top of the fan motor (E) into the decorative motor collar cover (D) and through the canopy ring (O). ring counter-clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (FF) located in the “L shaped slots”.
Assembly - Hanging the Fan 4 5 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. mounting bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly (B) in the mounting bracket socket.
Assembly - Hanging the Fan (continued) 6 7 Setting the remote control codes NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment. Installing the receiver WARNING: To reduce the risk of fire or electric shock, remember to disconnect power.
Assembly - Hanging the Fan (continued) 8 9 Wiring the receiver to the household wiring □□ The fan comes with 54 in. lead wire for use with an extended WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. WARNING: Each wire nut supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan.
Assembly - Hanging the Fan (continued) 10 Wrapping the extra wire NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan. □□ Gently wrap the excess wire around the mounting bracket. □□ Secure with electrical tape. 11 Mounting the fan GG WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball.
Assembly - Attaching the Fan Blades 12 13 Attaching the fan blades □□ Attach the blade assembly to the fan-motor assembly (E) by NOTE: Your fan blades are reversible. Select the blade side finish which best accentuates your decor. □□ Attach the blade (G) to the blade bracket (H) and the blade □□ Attaching the blade assemblies □□ medallion (I) using the blade attachment screws (AA). Start a blade attachment screw (AA) into the blade bracket (H).
Assembly - Attaching the Light Kit (continued) 15 Installing the light bulbs and glass bowl E WARNING: Do not overtighten when installing the glass shade into the light kit assembly. Allow the glass shade to cool completely before removing. □□ With the power off, install the light bulbs (M) (8.5W, provided) □□ F into the light bulb sockets.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Artículo Núm. #1002 726 186, 1002 722 213 Modelo Núm. 91315, 91353 Modelo Núm. 52-LTM Aprobado por UL GUÍA DE USO Y MANTENIMIENTO VENTILADOR DE TECHO LATHAM, DE 52 PLG (1,32 M) ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM Para ver un video instructivo sobre cómo instalar este producto: 1. Ir a www.homedepot.
Tabla de Contenido Tabla de Contenido.............................................................. 2 Ensamblaje............................................................................ 7 Información de Seguridad................................................... 2 Funcionamiento.................................................................. 13 Garantía................................................................................. 3 Mantenimiento y Limpieza......................................
Garantía El proveedor garantiza de por vida, a partir de la fecha en que el comprador original lo adquiere, que el motor del ventilador no presenta defectos de fabricación ni de material al momento en que es enviado desde la fábrica.
Preinstalación (continuación) HERRAJES INCLUIDOS NOTA: No se muestra el tamaño real de los herrajes.
Preinstalación (continuación) CONTENIDO DEL PAQUETE A G B H C I D J K E L F Pieza Descripción M Cantidad A Soporte deslizante para montaje (dentro de la cubierta) 1 B Ensamblaje de tubo bajante/bola C Pieza Descripción Cantidad G Aspa 5 H Soporte de aspa 5 1 I Medallón del aspa 5 Cubierta con aro incorporado 1 J Tazón de vidrio 1 D Cubierta decorativa del collarín del motor 1 K Receptor 1 E Ensamblaje del motor del ventilador 1 L Control remoto (baterías incluidas)
Instalación OPCIONES DE MONTAJE NOTA: Tal vez necesites un tubo bajante más largo para mantener la altura mínima adecuada de las aspas, al instalar el ventilador en un techo inclinado. El ángulo máximo permitido es de 28º de la posición horizontal.
Ensamblaje - Montaje Estándar en Techo 1 2 Preparación para el montaje Disposición de los cables □□ Retira el aro de cubierta (O) de la cubierta (C), girándolo en □□ □□ □□ Inserta los cables que salen por la parte superior del motor del ventilador (E) en la cubierta decorativa del collarín del motor (D) y a través del aro de la cubierta (O). sentido contrario a las manecillas del reloj hasta soltarlo.
Ensamblaje - Cómo Colgar el Ventilador 4 5 Cómo instalar el ventilador en la caja eléctrica ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, monta el ventilador sobre una caja eléctrica marcada como “aprobada como soporte de ventiladores de 35 lb (15,9 kg) o menos”, y usa los tornillos de montaje que vienen con la caja eléctrica. □□ Con cuidado alza el ensamblaje del motor del ventilador (E) hasta el soporte de montaje deslizante (A).
Ensamblaje — Cómo Colgar el Ventilador (continuación) 6 7 Configurar los códigos del control remoto NOTA:Las frecuencias del receptor y control remoto han sido preconfiguradas en la fábrica. Antes de instalar el receptor, asegúrate de que los interruptores en el transmisor y del control remoto estén configurados en la misma frecuencia. Los interruptores en el transmisor del control remoto están ubicados dentro del compartimento de la batería.
Ensamblaje — Cómo Colgar el Ventilador (continuación) 8 Como conectar los cables del receptor a los cables del hogar ADVERTENCIA: Para evitar una posible descarga eléctrica, desconecta la electricidad de la caja de fusibles principal antes de realizar el cableado. Si crees que no tienes suficiente conocimiento o experiencia sobre cableado eléctrico, contacta a un electricista certificado. 9 □□ El ventilador viene con cables terminales de 1.
Ensamblaje — Cómo Colgar el Ventilador (continuación) 10 Cómo enroscar el cable sobrante NOTA: Sigue estos pasos SOLAMENTE si no cortaste el cable sobrante del ventilador de techo hacia el receptor. □□ Con cuidado, enrosca el exceso de cable alrededor del soporte de □□ montaje debajo del receptor. Asegura con cinta de electricista.
Ensamblaje — Cómo Montar las Aspas del Ventilador 12 13 Cómo montar las aspas del ventilador □□ Coloca el aspa en la carcasa del motor del ventilador (E) NOTA:Las aspas de tu ventilador son reversibles. Elige el acabado del aspa que mejor resalte tu decoración. □□ Monta el aspa (G) al soporte de la misma (H) y el medallón □□ Cómo montar las aspas ensambladas □□ del aspa (I) usando los tornillos para montar las aspas (AA). Monta un tornillo para montar las aspas (AA) en el soporte del aspa (H).
Ensamblaje - Cómo Instalar el Kit de Luces (continuación) 15 Cómo instalar las bombillas y pantalla de vidrio E ADVERTENCIA: No apretar demasiado al instalar la pantalla de vidrio en el ensamblado del kit de luces. Espera que la pantalla de vidrio se enfríe completamente antes de retirarla. F □□ Con la electricidad apagada, instala las bombillas (M) (de □□ 8.5W incluidas) enroscándolas en los portabombillas.
Mantenimiento y Limpieza ADVERTENCIA: Asegúrate de que la corriente esté apagada antes de limpiar el ventilador. □□ Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa las conexiones de soporte, los soportes y los accesorios de las aspas dos veces al año. Verifica que estén seguros. No es necesario desmontar el ventilador del techo. □□ Limpia el ventilador con frecuencia para que luzca como nuevo con el pasar de los años.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 6 p.m., (hora Estándar del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para usarlo en el futuro. Este equipo ha sido probado y se determinó que cumple con los límites establecidos para un dispositivo digital Clase B, de acuerdo con la Parte 15 de las Normas de la FCC.