Item #100 277 05648 HAMPTON BAY. ™™ USE AND CARE GUIDE TRANSFORMER HAMPTON BAY% [ Questions, problems, missing parts? Before resuming to the store, call Hampton Bay Customer Service EASY STEP-BY-CITED 8a.m. 7 p.m., PST, Monday Friday, 9 a.m. 6 p.m., PST, Saturday FO 105 #ETRUSCAN SE FLASHGUN I WOLVERHAMPTON 7 e NORTHAMPTON DOWNLOAD 1k REAP =S THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this transformer.
Table of Contents Safety Information .. Warranty What is Covered . What is Not Covered Pr-installation Tools Required Hardware Included Package Contents .. Installation Operation Troubleshooting IMPORTANT SAFETY INFORMATION TO REDUCE RISK OF FIRE OR INJURY. For use with low voltage outdoor landscape lighting system only. Do not submerge transformer. Do not connect two or more transformers in parallel. Do not use with a dimmer. Do not use an extension cord.
WHAT IS COVERED The manufacturer warrants this transformer to be free from defects In materials and workmanship for a period of two (2) years from date of purchase.
1 Preparing the Cable Belg careful when splitting NOT to expose the copper wire, remove the landscape wire insulation 1/2 in. from both wires and twist ends. Lags, refer to strip length glued on the transformer. 1121n. (12.7 mm) Connecting the Cable to the Transformer Lay the transformer on a fiat, stable surface and Insert the stripped end of one wire under the terminal clamping plate Then tighten the screw.
Placing Your Fixtures and Routing the Cable Lay your fixtures (not included) out where you want 1o locate them. Be sure do not exceed 60 watt rating of the transformer. Route the low voltage cable to the fixtures. If there is extra cable,coil after the last fixture. 4 Attaching Your Fixtures Tum the transformer on. Attach your fixtures to the cable to using cable connectors as shown. Place ane connector on each side of the cable, then press together to lock.
B Mounting the Transformer To mount directly to a wall surface use the Included screws (AA) as shown, suitable for mounting within (0.3 the ground. When installing the screws, the spacing between the screw carters Is 3.46 In. (88 mm). See the template (D) for correct spacing. Hang the transformer (A) onto the screws (AR). A 12in. to 48 in. (03mto1.2 "l 346in.
ratio DUSK/OFF AT DAWN (Factory default setting) In this mode, the landscape lights will automatically tum on at dusk and tum off at dawn. Press ON AT DUSK /OFF AT DAWN button, the related indicator light will illuminate and “AU~ (Auto) will display on screen. This mode Is now active. 2 OAT DUSK/RUN TIME In this mode, the landscape lights will autocratically turn on at dusk and off after the set time (hrs). Press ON AT DUSK /RUN TIME button, the related indicator light will illuminate.
All of the lights fall to work = Check that the transformer power is on. « Check It there Is a loose connection at the transformer screw terminal with the cable. = Check that the prows switch is not in an OFF setting. Only some lights work « Check the connector to make sure the wire barbs have pierced the landscape cabs. * Halogen or incandescent bulbs (if applicable) can be burned out. Use caution as the bulb can be hot.
HAMPTON BAY. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service p.m., PST, Monday Friday, 9 a.m. 6 p.m., PST, Saturday WOLVERHAMPTON NORTHAMPTON Retain this manual for future use.