Item #1007072181 Model #PWORAB389901880 HAMPTON BAY. USE AND CARE GUIDE ASSEMBLY MANUAL ENGINEERED WOOD WORKTOPS Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service p.m., EST, Monday Friday, 9 a.m. — 6 p.m., EST, Saturday WOLVERHAMPTON NORTHAMPTON THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchases of this counter top. We strive to continually create quality products designed to enhance your home.
Pr-installation. . . . Planning Installation Tools Required PRAWN Read and understand these Instructions before Installation of this counter top. Save these Instructions for future reference. MINNESOTA RESIDENTS IMPORTANT HEALTH NOTICE. SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND THROAT IRRITATION, HEADACHE, NAUSEA AND VARIETY OF ASTHMA LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE.
PLANNING INSTALLATION Report any defects noticed immediately after unpacking the product prior ta installation. Ensure the counter top is installed and finished (using oil, oil-wax, vanish) before use. Follow the instructions contained in this manual to keep the warranty valid. Keep the counter top fiat in a fully supported position, away from direct heat and moisture and in the original packaging. This helps to avoid excessive sanding and wood war page.
TOOLS REQUIRED Claw hammer A Safety goggles DIETER] Level Tempe File measure By aN.
Ba fore installing the counter top, please read this manual carefully, make sure that you understand all the information contained unit and keep it for future. Any defaces noticed immediately after unpacking the product should be reported before installation. When in doubt please contact the Hampton bay CS All worktops are supplied pre finished. Upon unwrapping it is important to inspect the worktop carefully for any damage ar defects of any kind.
To assist with a trouble free installation ensure you have all the correct accessories required to do so. Allow 2 0.16 in. (4mm) gap between the back edge of the worktop and the wall as this will allow the worktop to expand and contract within the humidity of the kitchen. We advise that an backslash is used to cover the gap. Fix the backslash to the wall and not the worktop. A flexible silicone seal should be used between the backslash and the worktop.
OO No cut outs for sinks, stoves, etc.., should be nearer than 3.9 in. (100mm) from the end of the worktop or between cut outs, as this will seriously weaken the worktop. [J When a worktop is to be fitted near to a constant heat source, allow a minimum gap of 1.6 in. (40mm) between the ends of the worktop and the heat source unit.
Replacement edge banding is provided for cut edges that will be visible after assembly = ol 0 MINERAL OIL+WAX POLYURETHANE OR STAIN + POLYURETHANE
Cutting Counter top to Size [1 Use a circular saw with a fine tooth blade to make straight cuts and minimize chipping the edge. 0 Clamp a straight edge (1) to the top as a guide for your circular saw to achieve a straight cut, especially when two cut ages will be joined together to avoid any gaps. Cutting Hole for Sink, Cook top, etc. [0 Mark with removable tape the outline of the cutout. [J Drill a pilot hole to get jigsaw blade started.
HAMPTON BAY. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service p.m., EST, Monday — Friday, 9 a.m. — 6 p.m., EST, Saturday WOLVERHAMPTON NORTHAMPTON Retain this manual for future use.